From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: linux-sh@vger.kernel.org
Subject: Re: [PATCH v2 00/27] sh-pfc: Support pins with no associated GPIO port
Date: Thu, 18 Jul 2013 01:24:24 +0000 [thread overview]
Message-ID: <11379562.iEdjek24uT@avalon> (raw)
In-Reply-To: <1373933479-17727-1-git-send-email-laurent.pinchart+renesas@ideasonboard.com>
Hi Simon,
I've received a positive test feedback for this patch series. Could you please
include it in your -devel tags to get wider test coverage ? I'll then wait a
couple of weeks and, if no problem is found, send a pull request to Linus to
get the series merged through the pinctrl tree.
On Tuesday 16 July 2013 02:10:52 Laurent Pinchart wrote:
> Hello,
>
> Here's the second version of a patch series that cleans up and refactors the
> sh-pfc driver to add support for pins with no associated GPIO port.
>
> Most configurable pins in SuperH and SH Mobile devices can be used as a
> GPIO. However, some of them have selectable functions but are not
> associated with a GPIO. Those pins must be defined in the pinmux pins array
> but not registered in the GPIOs ranges.
>
> The series first cleans up the sh-pfc driver by removing unused features (01
> to 13) and then gradually refactors the code (14 to 21) to add pin numbers
> to the sh_pfc_pin structure (22 to 24). It finally computes pin ranges
> automatically (26) and adds support for pins without a GPIO port (27).
>
> The patches have been compiled for all supported SoCs and tested on the
> KZM9G board (SH73A0) with a hack to add I2C4 pins that have no GPIO port.
> I'm lacking hardware to test R8A7778 which would be a good test candidate.
>
> The patches are based on v3.11-rc1.
>
> Changes since v1:
>
> - Split patch 01/19 into per-SoC patches smaller than the vger limit
>
> Laurent Pinchart (27):
> sh-pfc: sh7720: Remove unused input_pu range
> sh-pfc: sh7722: Remove unused input_pd and input_pu ranges
> sh-pfc: sh7723: Remove unused input_pu range
> sh-pfc: sh7724: Remove unused input_pu range
> sh-pfc: sh7757: Remove unused input_pu range
> sh-pfc: sh7785: Remove unused input_pu range
> sh-pfc: sh7786: Remove unused input_pu range
> sh-pfc: shx3: Remove unused input_pu range
> sh-pfc: Remove unused input_pd and input_pu ranges
> sh-pfc: Remove unused PORT_DATA_* macros
> sh-pfc: Remove unused macro and enum entries
> sh-pfc: Remove unneeded const keywords
> sh-pfc: Remove unused GPIO_PORT_ALL macro
> sh-pfc: Don't overallocate memory for the GPIO chip pins array
> sh-pfc: Replace pinmux_enum_id typedef with u16
> sh-pfc: Rename gpio arguments to be consistent with the rest of the
> code
> sh-pfc: Consolidate PFC SoC data macros
> sh-pfc: Consolidate pin definition macros
> sh-pfc: sh7734: Use the common GP port style macros
> sh-pfc: shx3: Remove shx3_ prefix from static symbols
> sh-pfc: Don't duplicate argument to PINMUX_GPIO macro
> sh-pfc: Add port numbers to the CPU_ALL_PORT macro
> sh-pfc: Pass the pin number down to the port function macro
> sh-pfc: Add pin number to struct sh_pfc_pin
> sh-pfc: Rename struct sh_pfc nr_pins field to nr_gpio_pins
> sh-pfc: Compute pin ranges automatically
> sh-pfc: Support pins not associated with a GPIO port
>
> drivers/pinctrl/sh-pfc/core.c | 99 ++-
> drivers/pinctrl/sh-pfc/core.h | 10 +-
> drivers/pinctrl/sh-pfc/gpio.c | 45 +-
> drivers/pinctrl/sh-pfc/pfc-r8a73a4.c | 157 ++---
> drivers/pinctrl/sh-pfc/pfc-r8a7740.c | 47 +-
> drivers/pinctrl/sh-pfc/pfc-r8a7778.c | 55 +-
> drivers/pinctrl/sh-pfc/pfc-r8a7779.c | 63 +-
> drivers/pinctrl/sh-pfc/pfc-r8a7790.c | 59 +-
> drivers/pinctrl/sh-pfc/pfc-sh7203.c | 202 ++++---
> drivers/pinctrl/sh-pfc/pfc-sh7264.c | 246 ++++----
> drivers/pinctrl/sh-pfc/pfc-sh7269.c | 285 +++++----
> drivers/pinctrl/sh-pfc/pfc-sh7372.c | 53 +-
> drivers/pinctrl/sh-pfc/pfc-sh73a0.c | 104 ++--
> drivers/pinctrl/sh-pfc/pfc-sh7720.c | 701 +++++++++++-----------
> drivers/pinctrl/sh-pfc/pfc-sh7722.c | 747 +++++++++++------------
> drivers/pinctrl/sh-pfc/pfc-sh7723.c | 381 ++++++------
> drivers/pinctrl/sh-pfc/pfc-sh7724.c | 1093 ++++++++++++++-----------------
> drivers/pinctrl/sh-pfc/pfc-sh7734.c | 60 +-
> drivers/pinctrl/sh-pfc/pfc-sh7757.c | 709 +++++++++++-----------
> drivers/pinctrl/sh-pfc/pfc-sh7785.c | 700 +++++++++++-----------
> drivers/pinctrl/sh-pfc/pfc-sh7786.c | 383 ++++++------
> drivers/pinctrl/sh-pfc/pfc-shx3.c | 423 +++++++------
> drivers/pinctrl/sh-pfc/pinctrl.c | 49 +-
> drivers/pinctrl/sh-pfc/sh_pfc.h | 277 +++++----
> 24 files changed, 3275 insertions(+), 3673 deletions(-)
--
Regards,
Laurent Pinchart
next prev parent reply other threads:[~2013-07-18 1:24 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-16 0:10 [PATCH v2 00/27] sh-pfc: Support pins with no associated GPIO port Laurent Pinchart
2013-07-18 1:24 ` Laurent Pinchart [this message]
2013-07-19 2:10 ` Simon Horman
2013-09-21 0:43 ` Simon Horman
2013-09-21 8:59 ` Linus Walleij
2013-09-21 18:56 ` Laurent Pinchart
2013-09-22 12:19 ` Simon Horman
2013-07-20 22:19 ` Linus Walleij
2013-07-24 13:28 ` Laurent Pinchart
2013-07-26 23:14 ` Linus Walleij
2013-07-29 13:22 ` Laurent Pinchart
2013-07-29 14:32 ` Linus Walleij
2013-07-29 14:34 ` Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=11379562.iEdjek24uT@avalon \
--to=laurent.pinchart@ideasonboard.com \
--cc=linux-sh@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox