* Re: Hi all, a question about sh2a 7203
2008-01-18 16:48 Hi all, a question about sh2a 7203 Fabio Giovagnini
@ 2008-01-18 16:59 ` Kieran Bingham
2008-01-18 17:14 ` Fabio Giovagnini
2008-01-18 17:22 ` Fabio Giovagnini
2 siblings, 0 replies; 4+ messages in thread
From: Kieran Bingham @ 2008-01-18 16:59 UTC (permalink / raw)
To: linux-sh
Yes please - would be appreciated.
I was thinking it would be good if we could roll this into buildroot
somehow too.
--
Kieran
On Fri, 2008-01-18 at 17:48 +0100, Fabio Giovagnini wrote:
> I got the c,c++ compilers, on top of uClibc.
>
> If you like I send you the patch.
>
> Best regards
>
>
> Alle 11:44, domenica 9 dicembre 2007, Fabio Giovagnini ha scritto:
> > Hi Julian,
> > BSP for sh7263 which linux branch is part of?
> > Is it public and available the access to the toolchain source?
> >
> > Thanks a lot
> >
> > Alle 16:16, venerdì 7 dicembre 2007, Julian Back ha scritto:
> > > Hi Fabio,
> > >
> > > No we did not start with buildroot. The SH7203 BSP was derived from a
> > > BSP for SH7263 which was not developed by us. Whether that was derived
> > > from buildroot I don't know.
> > >
> > > Julian
> > >
> > > Fabio Giovagnini wrote:
> > > > Hi Julian,
> > > > only a simple question.
> > > > Is your uClinux environemnt derived directly from build root?
> > > >
> > > > Thanks in advance.
> > > >
> > > > Alle 17:53, mercoledì 5 dicembre 2007, Julian Back ha scritto:
> > > >> Fabio Giovagnini wrote:
> > > >>> I bought an evaluation bouard made by MPC data.
> > > >>> For 7203 the suggest to use uCLinux.
> > > >>> But they are sponsor of shlinux.com and if I remember properly they
> > > >>> suggestied to use linux-sh for the other eva boards than 7203.
> > > >>> According to you is uCLinux the best available choice for sh2a 7203?
> > > >>
> > > >> The board is actually made by Renesas, we (MPC Data) have done the
> > > >> Linux BSP.
> > > >>
> > > >> One of my colleagues has been tasked with integrating some of our BSPs
> > > >> with the main sh tree, this includes SH7203. It's at an early stage
> > > >> at the moment, he's just working out what needs to be done, but I hope
> > > >> you will see some submissions from him in the not too distant future.
> > > >>
> > > >> Julian
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Hi all, a question about sh2a 7203
2008-01-18 16:48 Hi all, a question about sh2a 7203 Fabio Giovagnini
2008-01-18 16:59 ` Kieran Bingham
@ 2008-01-18 17:14 ` Fabio Giovagnini
2008-01-18 17:22 ` Fabio Giovagnini
2 siblings, 0 replies; 4+ messages in thread
From: Fabio Giovagnini @ 2008-01-18 17:14 UTC (permalink / raw)
To: linux-sh
I'm not so familiar with patchs and other similar programs; so I produce the
patch and we can work togheter for interting it into buildroot.
Could it sound good for you?
Ciao
Alle 17:59, venerdì 18 gennaio 2008, Kieran Bingham ha scritto:
> Yes please - would be appreciated.
>
> I was thinking it would be good if we could roll this into buildroot
> somehow too.
>
> --
> Kieran
>
> On Fri, 2008-01-18 at 17:48 +0100, Fabio Giovagnini wrote:
> > I got the c,c++ compilers, on top of uClibc.
> >
> > If you like I send you the patch.
> >
> > Best regards
> >
> > Alle 11:44, domenica 9 dicembre 2007, Fabio Giovagnini ha scritto:
> > > Hi Julian,
> > > BSP for sh7263 which linux branch is part of?
> > > Is it public and available the access to the toolchain source?
> > >
> > > Thanks a lot
> > >
> > > Alle 16:16, venerdì 7 dicembre 2007, Julian Back ha scritto:
> > > > Hi Fabio,
> > > >
> > > > No we did not start with buildroot. The SH7203 BSP was derived from
> > > > a BSP for SH7263 which was not developed by us. Whether that was
> > > > derived from buildroot I don't know.
> > > >
> > > > Julian
> > > >
> > > > Fabio Giovagnini wrote:
> > > > > Hi Julian,
> > > > > only a simple question.
> > > > > Is your uClinux environemnt derived directly from build root?
> > > > >
> > > > > Thanks in advance.
> > > > >
> > > > > Alle 17:53, mercoledì 5 dicembre 2007, Julian Back ha scritto:
> > > > >> Fabio Giovagnini wrote:
> > > > >>> I bought an evaluation bouard made by MPC data.
> > > > >>> For 7203 the suggest to use uCLinux.
> > > > >>> But they are sponsor of shlinux.com and if I remember properly
> > > > >>> they suggestied to use linux-sh for the other eva boards than
> > > > >>> 7203. According to you is uCLinux the best available choice for
> > > > >>> sh2a 7203?
> > > > >>
> > > > >> The board is actually made by Renesas, we (MPC Data) have done the
> > > > >> Linux BSP.
> > > > >>
> > > > >> One of my colleagues has been tasked with integrating some of our
> > > > >> BSPs with the main sh tree, this includes SH7203. It's at an
> > > > >> early stage at the moment, he's just working out what needs to be
> > > > >> done, but I hope you will see some submissions from him in the not
> > > > >> too distant future.
> > > > >>
> > > > >> Julian
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Fabio Giovagnini
Aurion s.r.l.
via degli orti 11,
40050 Funo di Argelato (BO)
P.I e C.F.
00885711200
Tel. +39.335.8350919
Fax +39.051.8659009
www.aurion-tech.com
account telefono VoIP skype (www.skype.com):
aurion.giovagnini
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Hi all, a question about sh2a 7203
2008-01-18 16:48 Hi all, a question about sh2a 7203 Fabio Giovagnini
2008-01-18 16:59 ` Kieran Bingham
2008-01-18 17:14 ` Fabio Giovagnini
@ 2008-01-18 17:22 ` Fabio Giovagnini
2 siblings, 0 replies; 4+ messages in thread
From: Fabio Giovagnini @ 2008-01-18 17:22 UTC (permalink / raw)
To: linux-sh
Befor producing the patch I have to ask one thing.
During the building process I nedd to modify manually the Makefiles produced
by configure into build/stage/gcc/sh-linux/libiberty and into all the
libiberty of the subdirectories.
I have to add the -ml -m3e -m4 -fPIC options manualli because configure do not
do it automatically.
Where do I have to act to modify' configure.ac to obtain such a behaviour
automatically?
Thanks
Alle 18:14, venerdì 18 gennaio 2008, Fabio Giovagnini ha scritto:
> I'm not so familiar with patchs and other similar programs; so I produce
> the patch and we can work togheter for interting it into buildroot.
> Could it sound good for you?
>
> Ciao
>
> Alle 17:59, venerdì 18 gennaio 2008, Kieran Bingham ha scritto:
> > Yes please - would be appreciated.
> >
> > I was thinking it would be good if we could roll this into buildroot
> > somehow too.
> >
> > --
> > Kieran
> >
> > On Fri, 2008-01-18 at 17:48 +0100, Fabio Giovagnini wrote:
> > > I got the c,c++ compilers, on top of uClibc.
> > >
> > > If you like I send you the patch.
> > >
> > > Best regards
> > >
> > > Alle 11:44, domenica 9 dicembre 2007, Fabio Giovagnini ha scritto:
> > > > Hi Julian,
> > > > BSP for sh7263 which linux branch is part of?
> > > > Is it public and available the access to the toolchain source?
> > > >
> > > > Thanks a lot
> > > >
> > > > Alle 16:16, venerdì 7 dicembre 2007, Julian Back ha scritto:
> > > > > Hi Fabio,
> > > > >
> > > > > No we did not start with buildroot. The SH7203 BSP was derived
> > > > > from a BSP for SH7263 which was not developed by us. Whether that
> > > > > was derived from buildroot I don't know.
> > > > >
> > > > > Julian
> > > > >
> > > > > Fabio Giovagnini wrote:
> > > > > > Hi Julian,
> > > > > > only a simple question.
> > > > > > Is your uClinux environemnt derived directly from build root?
> > > > > >
> > > > > > Thanks in advance.
> > > > > >
> > > > > > Alle 17:53, mercoledì 5 dicembre 2007, Julian Back ha scritto:
> > > > > >> Fabio Giovagnini wrote:
> > > > > >>> I bought an evaluation bouard made by MPC data.
> > > > > >>> For 7203 the suggest to use uCLinux.
> > > > > >>> But they are sponsor of shlinux.com and if I remember properly
> > > > > >>> they suggestied to use linux-sh for the other eva boards than
> > > > > >>> 7203. According to you is uCLinux the best available choice for
> > > > > >>> sh2a 7203?
> > > > > >>
> > > > > >> The board is actually made by Renesas, we (MPC Data) have done
> > > > > >> the Linux BSP.
> > > > > >>
> > > > > >> One of my colleagues has been tasked with integrating some of
> > > > > >> our BSPs with the main sh tree, this includes SH7203. It's at
> > > > > >> an early stage at the moment, he's just working out what needs
> > > > > >> to be done, but I hope you will see some submissions from him in
> > > > > >> the not too distant future.
> > > > > >>
> > > > > >> Julian
> >
> > -
> > To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> > the body of a message to majordomo@vger.kernel.org
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Fabio Giovagnini
Aurion s.r.l.
via degli orti 11,
40050 Funo di Argelato (BO)
P.I e C.F.
00885711200
Tel. +39.335.8350919
Fax +39.051.8659009
www.aurion-tech.com
account telefono VoIP skype (www.skype.com):
aurion.giovagnini
^ permalink raw reply [flat|nested] 4+ messages in thread