From: Adrian McMenamin <adrian@newgolddream.dyndns.info>
To: Greg KH <greg@kroah.com>
Cc: LKML <linux-kernel@vger.kernel.org>, linux-sh <linux-sh@vger.kernel.org>
Subject: kobject oops with maple bus
Date: Sat, 26 Jan 2008 19:53:20 +0000 [thread overview]
Message-ID: <1201377200.6672.10.camel@localhost.localdomain> (raw)
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="windows-1254", Size: 9144 bytes --]
Greg,
Just updated my git to the latest sources and get these (seemingly non-fatal) oops with the Dreamcast maple bus. I'll investigate further, but they may mean something to out out of the box.
Adrian
dreamy:~# [ 0.000000] Linux version 2.6.24-gf0ea9c3d-dirty (adrian@bossclass) (gcc version 3.4.6) #328 PREEMPT Sat Jan 26 19:45:30 GMT 2008
[ 0.000000] console [sercon0] enabled
[ 0.000000] Booting machvec: Sega Dreamcast
[ 0.000000] Node 0: start_pfn = 0xc000, low = 0xd000
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 49152 -> 53248
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 49152 -> 53248
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4064
[ 0.000000] Kernel command line: root=/dev/nfs rw nfsroot\x192.168.61.50:/home/adrian/debdist ip=dhcp earlyprintk=serial video=pvr2fb:640x480-32@60 consol7
[ 0.000000] PID hash table entries: 64 (order: 6, 256 bytes)
[ 0.000000] Using tmu for system timer
[ 0.000000] Using 12.469 MHz high precision timer.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] Dentry cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Inode-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Memory: 13468k/16384k available (1918k kernel code, 645k data, 96k init)
[ 0.000000] PVR\x040205c1 CVR\0000000 PRR\0000000
[ 0.000000] I-cache : n_ways=1 n_sets%6 way_incr92
[ 0.000000] I-cache : entry_mask=0x00001fe0 alias_mask=0x00001000 n_aliases=2
[ 0.000000] D-cache : n_ways=1 n_setsQ2 way_incr\x16384
[ 0.000000] D-cache : entry_mask=0x00003fe0 alias_mask=0x00003000 n_aliases=4
[ 0.000000] SLUB: Genslabs=9, HWalign2, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 0.000000] Mount-cache hash table entries: 512
[ 0.000000] CPU: SH7750
[ 0.000000] net_namespace: 64 bytes
[ 0.000000] NET: Registered protocol family 16
[ 0.000000] Maple bus at (0, 0): Connected function 0x0
[ 0.000000] No maple driver found for this device
[ 0.000000] Maple bus at (1, 0): Connected function 0x0
[ 0.000000] No maple driver found for this device
[ 0.000000] Maple bus at (2, 0): Connected function 0x0
[ 0.000000] No maple driver found for this device
[ 0.000000] Maple bus at (3, 0): Connected function 0x0
[ 0.000000] No maple driver found for this device
[ 0.000000] Maple bus core now registered.
[ 0.000000] DMA: Registering DMA API.
[ 0.000000] DMA: Registering sh_dmac handler (4 channels).
[ 0.000000] Maple bus at (0, 0): Connected function 0x1
[ 0.000000] No maple driver found for this device
[ 0.000000] kobject (8cc2d360): tried to init an initialized object, something is seriously wrong.
[ 0.000000] Stack: (0x8cc1be88 to 0x8cc1c000)
[ 0.000000] be80: 8c00762e 8cc1be98 8c27d050 8cc2d360 8c103890 8cc1bea0
[ 0.000000] bea0: 8c14435e 8cc1beb0 8cc2d200 8cc2d2f8 8cc2d200 8c144aae 8cc1bec0 8cc2d2f8
[ 0.000000] bec0: 8c159aa8 8cc1becc 00000001 8c159e58 8cc1beec 8cc69880 fffffffe 8c159d20
[ 0.000000] bee0: 8c27e14c 8cc2d200 8c27e13c 8cc1bf10 8c02e7c0 8cc0ea3c 8c1dbf60 8c02a2da
[ 0.000000] bf00: 8cc1bf1c 8c018b60 fffffffe 8c159d20 ffffff0f 8cc01240 8c27e13c 8c02a428
[ 0.000000] bf20: 8cc1bf3c 8c02e7c0 <6>DMA: Registering pvr2_dmac handler (1 channel).
[ 0.000000] 8c02a220 8c02e940 8c02e200 8cc01248 8cc01240 00000000
[ 0.000000] bf40: <6>DMA: Registering g2_dmac handler (4 channels).
[ 0.000000] 8cc0e9c0 8c02e9c0 8cc1bf48 8cc1bf48 00000000 8cc0e9c0 8c02e9c0 8cc1bf48
[ 0.000000] bf60: 8cc1bf48 8c02e25a 8cc1bf84 00000000 fffffffc 8c013900 8c02a3a0 8cc01240
[ 0.000000] bf80: 8c02e200 8c0038c4 00000000 00000000 00000000 00000000 00000000 00000000
[ 0.000000] bfa0: 00000000 Autoconfig PCI channel 0x8c27e36c
[ 0.000000] Scanning bus 00, I/O 0x01001600:0x01003600, Mem 0x01840000:0x01848000
[ 0.000000] 00:00.0 Class 0200: 11db:1234 (rev 10)
[ 0.000000] I/O at 0x01001600 [size=0x100]
[ 0.000000] Mem at 0x01840000 [size=0x100]
[ 0.000000] 00000000 00000000 00000000 8cc11ec8 8c02e220 00000000 00000000
[ 0.000000] bfc0: 00000000 00000000 00000000 00000000 00000000 <5>PCI: Fixing up device 0000:00:00.0
[ 0.000000] 00000000 00000000 8cc1bfa0
[ 0.000000] bfe0: 8c0038c0 00000000 40000000 00000000 00000000 00000000 00000000 00000000
[ 0.000000]
[ 0.000000] Call trace:
[ 0.000000] [<8c00762e>] dump_stack+0xe/0x9e0
[ 0.000000] [<8c103890>] kobject_init+0x30/0xa0
[ 0.000000] [<8c14435e>] device_initialize+0x1e/0xa0
[ 0.000000] [<8c144aae>] device_register+0xe/0x40
[ 0.000000] [<8c159aa8>] maple_attach_driver+0x128/0x1c0
[ 0.000000] [<8c159e58>] maple_dma_handler+0x138/0x300
[ 0.000000] [<8c159d20>] maple_dma_handler+0x0/0x300
[ 0.000000] [<8c02e7c0>] prepare_to_wait+0x0/0xc0
[ 0.000000] [<8c1dbf60>] schedule+0x360/0x420
[ 0.000000] [<8c02a2da>] run_workqueue+0xba/0x180
[ 0.000000] [<8c018b60>] printk+0x0/0x40
[ 0.000000] [<8c159d20>] maple_dma_handler+0x0/0x300
[ 0.000000] [<8c02a428>] worker_thread+0x88/0xe0
[ 0.000000] [<8c02e7c0>] prepare_to_wait+0x0/0xc0
[ 0.000000] [<8c02a220>] run_workqueue+0x0/0x180
[ 0.000000] [<8c02e940>] finish_wait+0x0/0x80
[ 0.000000] [<8c02e200>] kthread_should_stop+0x0/0x20
[ 0.000000] [<8c02e9c0>] autoremove_wake_function+0x0/0x40
[ 0.000000] [<8c02e9c0>] autoremove_wake_function+0x0/0x40
[ 0.000000] [<8c02e25a>] kthread+0x3a/0x80
[ 0.000000] [<8c013900>] complete+0x0/0xc0
[ 0.000000] [<8c02a3a0>] worker_thread+0x0/0xe0
[ 0.000000] [<8c02e200>] kthread_should_stop+0x0/0x20
[ 0.000000] [<8c0038c4>] kernel_thread_helper+0x4/0x20
[ 0.000000] [<8c02e220>] kthread+0x0/0x80
[ 0.000000] [<8c0038c0>] kernel_thread_helper+0x0/0x20
[ 0.000000]
[ 0.000000] Maple bus at (1, 0): Connected function 0x40
[ 0.000000] No maple driver found for this device
[ 0.000000] Time: SuperH clocksource has been installed.
[ 0.000000] kobject (8cc2d560): tried to init an initialized object, something is seriously wrong.
[ 0.000000] Stack: (0x8cc1be88 to 0x8cc1c000)
[ 0.000000] be80: 8c00762e 8cc1be98 8c27d050 8cc2d560 8c103890 8cc1bea0
[ 0.000000] bea0: 8c14435e 8cc1beb0 8cc2d400 8cc2d4f8 8cc2d400 8c144aae 8cc1bec0 8cc2d4f8
[ 0.000000] bec0: 8c159aa8 8cc1becc 00000040 8c159e58 8cc1beec 8cc69920 fffffffe 8c159d20
[ 0.000000] bee0: 8c27e14c 8cc2d400 8c27e13c 8cc1bf10 8c02e7c0 8cc0ea3c 8c1dbf60 8c02a2da
[ 0.000000] bf00: 8cc1bf1c 8c018b60 fffffffe 8c159d20 ffffff0f 8cc01240 8c27e13c 8c02a428
[ 0.000000] bf20: 8cc1bf3c 8c02e7c0 8c02a220 8c02e940 8c02e200 8cc01248 8cc01240 00000000
[ 0.000000] bf40: 8cc0e9c0 8c02e9c0 8cc1bf48 8cc1bf48 00000000 8cc0e9c0 8c02e9c0 8cc1bf48
[ 0.000000] bf60: 8cc1bf48 <6>NET: Registered protocol family 2
[ 0.000000] 8c02e25a 8cc1bf84 00000000 fffffffc 8c013900 8c02a3a0 8cc01240
[ 0.000000] bf80: 8c02e200 8c0038c4 00000000 00000000 00000000 00000000 00000000 00000000
[ 0.000000] bfa0: 00000000 00000000 00000000 00000000 8cc11ec8 8c02e220 00000000 00000000
[ 0.000000] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 8cc1bfa0
[ 0.000000] bfe0: 8c0038c0 00000000 40000000 00000000 00000000 00000000 00000000 00000000
[ 0.000000]
[ 0.000000] Call trace:
[ 0.000000] [<8c00762e>] dump_stack+0xe/0x9e0
[ 0.000000] [<8c103890>] kobject_init+0x30/0xa0
[ 0.000000] [<8c14435e>] device_initialize+0x1e/0xa0
[ 0.000000] [<8c144aae>] device_register+0xe/0x40
[ 0.000000] [<8c159aa8>] maple_attach_driver+0x128/0x1c0
[ 0.000000] [<8c159e58>] maple_dma_handler+0x138/0x300
[ 0.000000] [<8c159d20>] maple_dma_handler+0x0/0x300
[ 0.000000] [<8c02e7c0>] prepare_to_wait+0x0/0xc0
[ 0.000000] [<8c1dbf60>] schedule+0x360/0x420
[ 0.000000] [<8c02a2da>] run_workqueue+0xba/0x180
[ 0.000000] [<8c018b60>] printk+0x0/0x40
[ 0.000000] [<8c159d20>] maple_dma_handler+0x0/0x300
[ 0.000000] [<8c02a428>] worker_thread+0x88/0xe0
[ 0.000000] [<8c02e7c0>] prepare_to_wait+0x0/0xc0
[ 0.000000] [<8c02a220>] run_workqueue+0x0/0x180
[ 0.000000] [<8c02e940>] finish_wait+0x0/0x80
[ 0.000000] [<8c02e200>] kthread_should_stop+0x0/0x20
[ 0.000000] [<8c02e9c0>] autoremove_wake_function+0x0/0x40
[ 0.000000] [<8c02e9c0>] autoremove_wake_function+0x0/0x40
[ 0.000000] [<8c02e25a>] kthread+0x3a/0x80
[ 0.000000] [<8c013900>] complete+0x0/0xc0
[ 0.000000] [<8c02a3a0>] worker_thread+0x0/0xe0
[ 0.000000] [<8c02e200>] kthread_should_stop+0x0/0x20
[ 0.000000] [<8c0038c4>] kernel_thread_helper+0x4/0x20
[ 0.000000] [<8c02e220>] kthread+0x0/0x80
[ 0.000000] [<8c0038c0>] kernel_thread_helper+0x0/0x20
[ 0.000000]
[ 0.000000] No maple devices attached to port 2
[ 0.000000] No maple devices attached to port 3
-
To unsubscribe from this list: send the line "unsubscribe linux-sh" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2008-01-26 19:53 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-01-26 19:53 Adrian McMenamin [this message]
2008-01-26 19:55 ` kobject oops with maple bus Adrian McMenamin
2008-01-26 20:44 ` Greg KH
2008-01-26 22:01 ` Adrian McMenamin
2008-01-28 9:41 ` Adrian McMenamin
2008-01-28 19:23 ` Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1201377200.6672.10.camel@localhost.localdomain \
--to=adrian@newgolddream.dyndns.info \
--cc=greg@kroah.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sh@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox