linux-sh.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Arnd Hannemann <arnd@arndnet.de>
To: linux-mmc@vger.kernel.org
Cc: linux-sh@vger.kernel.org, g.liakhovetski@gmx.de,
	Arnd Hannemann <arnd@arndnet.de>
Subject: [PATCH 4/4] [RFC] sh: sh7722 Enable SDIO IRQs
Date: Mon, 06 Dec 2010 17:35:42 +0000	[thread overview]
Message-ID: <1291656942-18100-4-git-send-email-arnd@arndnet.de> (raw)
In-Reply-To: <1291656942-18100-1-git-send-email-arnd@arndnet.de>

This patch enables the interrupt generation for SDIO IRQs
of the sdhi controllers of the soc. To make sure interrupts
are handled announce the MMC_CAP_SDIO_IRQ capability
on migor. Untested, therefore RFC.

Signed-off-by: Arnd Hannemann <arnd@arndnet.de>
---
 arch/sh/boards/mach-migor/setup.c      |    1 +
 arch/sh/kernel/cpu/sh4a/setup-sh7722.c |    2 +-
 2 files changed, 2 insertions(+), 1 deletions(-)

diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c
index 5dc72b4..b9cba53 100644
--- a/arch/sh/boards/mach-migor/setup.c
+++ b/arch/sh/boards/mach-migor/setup.c
@@ -413,6 +413,7 @@ static struct resource sdhi_cn9_resources[] = {
 static struct sh_mobile_sdhi_info sh7724_sdhi_data = {
 	.dma_slave_tx	= SHDMA_SLAVE_SDHI0_TX,
 	.dma_slave_rx	= SHDMA_SLAVE_SDHI0_RX,
+	.tmio_caps      = MMC_CAP_SDIO_IRQ,
 };
 
 static struct platform_device sdhi_cn9_device = {
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
index d551ed8..a164f89 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
@@ -699,7 +699,7 @@ static struct intc_mask_reg mask_registers[] __initdata = {
 	  { I2C_DTEI, I2C_WAITI, I2C_TACKI, I2C_ALI,
 	    FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLENDI, FLCTL_FLSTEI } },
 	{ 0xa40800a0, 0xa40800e0, 8, /* IMR8 / IMCR8 */
-	  { DISABLED, DISABLED, ENABLED, ENABLED, 0, 0, TWODG, SIU } },
+	  { DISABLED, ENABLED, ENABLED, ENABLED, 0, 0, TWODG, SIU } },
 	{ 0xa40800a4, 0xa40800e4, 8, /* IMR9 / IMCR9 */
 	  { 0, 0, 0, CMT, 0, USB_USBI1, USB_USBI0, } },
 	{ 0xa40800a8, 0xa40800e8, 8, /* IMR10 / IMCR10 */
-- 
1.7.0.4


  parent reply	other threads:[~2010-12-06 17:35 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-12-06 17:35 [PATCH 1/4] mmc: tmio: Implement SDIO IRQ Arnd Hannemann
2010-12-06 17:35 ` [PATCH 2/4] ARM: mach-shmobile: sh7372 Enable SDIO IRQs Arnd Hannemann
2010-12-06 17:35 ` [PATCH 3/4] sh: sh7724 " Arnd Hannemann
2010-12-06 17:35 ` Arnd Hannemann [this message]
2010-12-07  5:39 ` [PATCH 1/4] mmc: tmio: Implement SDIO IRQ Magnus Damm
2010-12-07 12:22   ` Arnd Hannemann
2010-12-07 14:37     ` Magnus Damm
2010-12-07 15:08       ` Arnd Hannemann
2010-12-14 15:44         ` Magnus Damm
2010-12-20  3:58           ` Magnus Damm
2010-12-20 15:51             ` Arnd Hannemann
2010-12-20 15:53             ` [PATCH 0/6 v2] mmc: tmio: Add SDIO IRQ support Arnd Hannemann
2010-12-22 13:54               ` Magnus Damm
2010-12-23 10:45                 ` [PATCH] [RFC] sh: sh7723 / ap325rxa enable SDIO IRQs Arnd Hannemann
2010-12-28 10:01                   ` Magnus Damm
2010-12-20 15:53             ` [PATCH 1/6 v2] mmc: tmio: implement SDIO IRQ Arnd Hannemann
2010-12-20 15:53             ` [PATCH 2/6 v2] mfd: sh_mobile_sdhi: activate SDIO IRQ for tmio_mmc Arnd Hannemann
2010-12-24 11:03               ` [PATCH 2/6 v2] mfd: sh_mobile_sdhi: activate SDIO IRQ for Samuel Ortiz
2010-12-20 15:53             ` [PATCH 3/6 v2] mmc: tmio: disable IRQs early in remove Arnd Hannemann
2010-12-20 15:53             ` [PATCH 4/6 v2] ARM: mach-shmobile: sh7372 Enable SDIO IRQs Arnd Hannemann
2010-12-20 15:53             ` [PATCH 5/6 v2] sh: sh7724 " Arnd Hannemann
2010-12-20 15:53             ` [PATCH 6/6 v2] [RFC] sh: sh7722 " Arnd Hannemann
2010-12-23 10:42               ` [PATCH 6/6 v3] " Arnd Hannemann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1291656942-18100-4-git-send-email-arnd@arndnet.de \
    --to=arnd@arndnet.de \
    --cc=g.liakhovetski@gmx.de \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux-sh@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).