From: Arnd Hannemann <arnd@arndnet.de>
To: linux-sh@vger.kernel.org
Subject: [PATCH] sh: mach-ecovec24: enable runtime PM for SDHI
Date: Wed, 29 Dec 2010 15:50:28 +0000 [thread overview]
Message-ID: <1293637828-8817-1-git-send-email-arnd@arndnet.de> (raw)
This patch enables runtime PM for SDHI on ecovec.
Tested with a b43 based SDIO card.
Signed-off-by: Arnd Hannemann <arnd@arndnet.de>
---
This patch applies on top of:
[4/6] sh: sh7724 Enable SDIO IRQs
https://patchwork.kernel.org/patch/437471/
arch/sh/boards/mach-ecovec24/setup.c | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index 36d7ca7..0f0bd63 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -476,7 +476,7 @@ static struct sh_mobile_sdhi_info sdhi0_info = {
.dma_slave_tx = SHDMA_SLAVE_SDHI0_TX,
.dma_slave_rx = SHDMA_SLAVE_SDHI0_RX,
.set_pwr = sdhi0_set_pwr,
- .tmio_caps = MMC_CAP_SDIO_IRQ,
+ .tmio_caps = MMC_CAP_SDIO_IRQ | MMC_CAP_POWER_OFF_CARD,
};
static struct resource sdhi0_resources[] = {
@@ -518,7 +518,7 @@ static void sdhi1_set_pwr(struct platform_device *pdev, int state)
static struct sh_mobile_sdhi_info sdhi1_info = {
.dma_slave_tx = SHDMA_SLAVE_SDHI1_TX,
.dma_slave_rx = SHDMA_SLAVE_SDHI1_RX,
- .tmio_caps = MMC_CAP_SDIO_IRQ,
+ .tmio_caps = MMC_CAP_SDIO_IRQ | MMC_CAP_POWER_OFF_CARD,
.set_pwr = sdhi1_set_pwr,
};
--
1.7.2.3
next reply other threads:[~2010-12-29 15:50 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-12-29 15:50 Arnd Hannemann [this message]
-- strict thread matches above, loose matches on Subject: below --
2011-01-06 4:13 [PATCH] sh: mach-ecovec24: enable runtime PM for SDHI Paul Mundt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1293637828-8817-1-git-send-email-arnd@arndnet.de \
--to=arnd@arndnet.de \
--cc=linux-sh@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).