From: Bastian Hecht <hechtb@googlemail.com>
To: linux-mtd@lists.infradead.org
Cc: Bastian Hecht <hechtb@gmail.com>,
magnus.damm@gmail.com, laurent.pinchart@ideasonboard.com,
linux-sh@vger.kernel.org
Subject: [PATCH v4 8/8] mtd: sh_flctl: Use user oob data in hardware ECC mode
Date: Mon, 14 May 2012 12:14:47 +0000 [thread overview]
Message-ID: <1336997687-6868-9-git-send-email-hechtb@gmail.com> (raw)
In-Reply-To: <1336997687-6868-1-git-send-email-hechtb@gmail.com>
In hardware ecc mode, the flctl now writes and reads the oob data
provided by the user. Additionally the ECC is now returned in normal
page reads, not only when using the explicit NAND_CMD_READOOB command.
Signed-off-by: Bastian Hecht <hechtb@gmail.com>
Acked-by: Brian Norris <computersforpeace@gmail.com>
---
drivers/mtd/nand/sh_flctl.c | 25 +++++++++++++++++--------
1 files changed, 17 insertions(+), 8 deletions(-)
diff --git a/drivers/mtd/nand/sh_flctl.c b/drivers/mtd/nand/sh_flctl.c
index 631f7ed..8a07212 100644
--- a/drivers/mtd/nand/sh_flctl.c
+++ b/drivers/mtd/nand/sh_flctl.c
@@ -275,13 +275,12 @@ static void read_fiforeg(struct sh_flctl *flctl, int rlen, int offset)
{
int i, len_4align;
unsigned long *buf = (unsigned long *)&flctl->done_buff[offset];
- void *fifo_addr = (void *)FLDTFIFO(flctl);
len_4align = (rlen + 3) / 4;
for (i = 0; i < len_4align; i++) {
wait_rfifo_ready(flctl);
- buf[i] = readl(fifo_addr);
+ buf[i] = readl(FLDTFIFO(flctl));
buf[i] = be32_to_cpu(buf[i]);
}
}
@@ -318,6 +317,18 @@ static void write_fiforeg(struct sh_flctl *flctl, int rlen, int offset)
}
}
+static void write_ec_fiforeg(struct sh_flctl *flctl, int rlen, int offset)
+{
+ int i, len_4align;
+ unsigned long *data = (unsigned long *)&flctl->done_buff[offset];
+
+ len_4align = (rlen + 3) / 4;
+ for (i = 0; i < len_4align; i++) {
+ wait_wecfifo_ready(flctl);
+ writel(cpu_to_be32(data[i]), FLECFIFO(flctl));
+ }
+}
+
static void set_cmd_regs(struct mtd_info *mtd, uint32_t cmd, uint32_t flcmcdr_val)
{
struct sh_flctl *flctl = mtd_to_flctl(mtd);
@@ -384,6 +395,7 @@ static int flctl_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
uint8_t *buf, int oob_required, int page)
{
chip->read_buf(mtd, buf, mtd->writesize);
+ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
return 0;
}
@@ -391,6 +403,7 @@ static void flctl_write_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
const uint8_t *buf, int oob_required)
{
chip->write_buf(mtd, buf, mtd->writesize);
+ chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
}
static void execmd_read_page_sector(struct mtd_info *mtd, int page_addr)
@@ -466,7 +479,7 @@ static void execmd_read_oob(struct mtd_info *mtd, int page_addr)
static void execmd_write_page_sector(struct mtd_info *mtd)
{
struct sh_flctl *flctl = mtd_to_flctl(mtd);
- int i, page_addr = flctl->seqin_page_addr;
+ int page_addr = flctl->seqin_page_addr;
int sector, page_sectors;
page_sectors = flctl->page_size ? 4 : 1;
@@ -482,11 +495,7 @@ static void execmd_write_page_sector(struct mtd_info *mtd)
for (sector = 0; sector < page_sectors; sector++) {
write_fiforeg(flctl, 512, 512 * sector);
-
- for (i = 0; i < 4; i++) {
- wait_wecfifo_ready(flctl); /* wait for write ready */
- writel(0xFFFFFFFF, FLECFIFO(flctl));
- }
+ write_ec_fiforeg(flctl, 16, mtd->writesize + 16 * sector);
}
wait_completion(flctl);
--
1.7.5.4
next prev parent reply other threads:[~2012-05-14 12:14 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-14 12:14 [PATCH v4 0/8] sh_flctl hardware ECC mode cleanup Bastian Hecht
2012-05-14 12:14 ` [PATCH v4 1/8] mtd: sh_flctl: Add missing iounmap() Bastian Hecht
2012-05-14 12:14 ` [PATCH v4 2/8] mtd: sh_flctl: Add support for error IRQ Bastian Hecht
2012-07-06 15:51 ` David Woodhouse
2012-07-06 16:39 ` Bastian Hecht
2012-05-14 12:14 ` [PATCH v4 3/8] mtd: sh_flctl: Use different OOB layout Bastian Hecht
2012-05-14 12:14 ` [PATCH v4 4/8] mtd: sh_flctl: Fix hardware ECC behaviour Bastian Hecht
2012-05-14 12:14 ` [PATCH v4 5/8] mtd: sh_flctl: Simplify the hardware ecc page read/write Bastian Hecht
2012-05-14 12:14 ` [PATCH v4 6/8] mtd: sh_flctl: Group sector accesses into a single transfer Bastian Hecht
2012-05-14 12:14 ` [PATCH v4 7/8] mtd: sh_flctl: Restructure the hardware ECC handling Bastian Hecht
2012-05-14 12:14 ` Bastian Hecht [this message]
2012-05-14 15:12 ` [PATCH v4 8/8] mtd: sh_flctl: Use user oob data in hardware ECC mode Brian Norris
2012-05-16 9:37 ` Bastian Hecht
2012-05-15 10:47 ` [PATCH v4 0/8] sh_flctl hardware ECC mode cleanup Artem Bityutskiy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1336997687-6868-9-git-send-email-hechtb@gmail.com \
--to=hechtb@googlemail.com \
--cc=hechtb@gmail.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-mtd@lists.infradead.org \
--cc=linux-sh@vger.kernel.org \
--cc=magnus.damm@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).