linux-sh.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Simon Horman <horms@verge.net.au>
To: linux-sh@vger.kernel.org
Subject: [PATCH] ARM: mach-shmobile: marzen: defconfig update
Date: Sat, 25 Aug 2012 06:37:43 +0000	[thread overview]
Message-ID: <1345876664-2590-1-git-send-email-horms@verge.net.au> (raw)

Update marzen defconfig
* Enable SDHI and MMC Block device as SDHI hw
  is now supported.
* Default to NFS root, this is consistent with many other
  shmobile boards
* Enable UNIX and INOTIFY_USER which is required by udevd

Other changes are noise due to using make savedefconfig
to create the new defconfig.

Cc: Phil Edworthy <phil.edworthy@renesas.com>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
 arch/arm/configs/marzen_defconfig | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

diff --git a/arch/arm/configs/marzen_defconfig b/arch/arm/configs/marzen_defconfig
index 864f9a5..5d21b2c 100644
--- a/arch/arm/configs/marzen_defconfig
+++ b/arch/arm/configs/marzen_defconfig
@@ -1,13 +1,14 @@
 # CONFIG_ARM_PATCH_PHYS_VIRT is not set
 CONFIG_EXPERIMENTAL=y
 CONFIG_KERNEL_LZMA=y
+CONFIG_NO_HZ=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT\x16
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_EMBEDDED=y
 CONFIG_SLAB=y
-# CONFIG_BLOCK is not set
+# CONFIG_IOSCHED_CFQ is not set
 CONFIG_ARCH_SHMOBILE=y
 CONFIG_ARCH_R8A7779=y
 CONFIG_MACH_MARZEN=y
@@ -21,7 +22,6 @@ CONFIG_ARM_ERRATA_458693=y
 CONFIG_ARM_ERRATA_460075=y
 CONFIG_ARM_ERRATA_743622=y
 CONFIG_ARM_ERRATA_754322=y
-CONFIG_NO_HZ=y
 CONFIG_SMP=y
 # CONFIG_ARM_CPU_TOPOLOGY is not set
 CONFIG_AEABI=y
@@ -29,13 +29,16 @@ CONFIG_AEABI=y
 CONFIG_HIGHMEM=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttySC2,115200 earlyprintk=sh-sci.2,115200 ignore_loglevel"
+CONFIG_CMDLINE="console=ttySC2,115200 earlyprintk=sh-sci.2,115200 ignore_loglevel root=/dev/nfs ip=on"
 CONFIG_CMDLINE_FORCE=y
 CONFIG_KEXEC=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 CONFIG_PM_RUNTIME=y
 CONFIG_NET=y
+CONFIG_UNIX=y
 CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
 # CONFIG_IPV6 is not set
 # CONFIG_WIRELESS is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
@@ -69,16 +72,17 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y
 CONFIG_GPIO_SYSFS=y
 # CONFIG_HWMON is not set
 CONFIG_SSB=y
-# CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+CONFIG_MMC_SDHI=y
 CONFIG_UIO=y
 CONFIG_UIO_PDRV_GENIRQ=y
 # CONFIG_IOMMU_SUPPORT is not set
-# CONFIG_FILE_LOCKING is not set
 # CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY_USER is not set
 CONFIG_TMPFS=y
 # CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_INFO_REDUCED=y
-- 
1.7.10.2.484.gcd07cc5


             reply	other threads:[~2012-08-25  6:37 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-08-25  6:37 Simon Horman [this message]
2012-08-27  8:24 ` [PATCH] ARM: mach-shmobile: marzen: defconfig update Simon Horman
  -- strict thread matches above, loose matches on Subject: below --
2012-09-06  2:06 [GIT PULL] Renesas ARM-based SoC: defconfig for 3.7 Simon Horman
2012-09-06  2:06 ` [PATCH] ARM: mach-shmobile: marzen: defconfig update Simon Horman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1345876664-2590-1-git-send-email-horms@verge.net.au \
    --to=horms@verge.net.au \
    --cc=linux-sh@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).