linux-sh.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Simon Horman <horms@verge.net.au>
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 5/8] ARM: shmobile: marzen: add HSPI support
Date: Thu, 01 Nov 2012 00:40:08 +0000	[thread overview]
Message-ID: <1351730411-1874-6-git-send-email-horms@verge.net.au> (raw)
In-Reply-To: <1351730411-1874-1-git-send-email-horms@verge.net.au>

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
 arch/arm/configs/marzen_defconfig     |    4 ++++
 arch/arm/mach-shmobile/board-marzen.c |   25 +++++++++++++++++++++++++
 2 files changed, 29 insertions(+)

diff --git a/arch/arm/configs/marzen_defconfig b/arch/arm/configs/marzen_defconfig
index 53382b6..5b8215f 100644
--- a/arch/arm/configs/marzen_defconfig
+++ b/arch/arm/configs/marzen_defconfig
@@ -69,6 +69,10 @@ CONFIG_SERIAL_SH_SCI=y
 CONFIG_SERIAL_SH_SCI_NR_UARTS=6
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_RCAR=y
+CONFIG_SPI=y
+CONFIG_SPI_SH_HSPI=y
 CONFIG_GPIO_SYSFS=y
 # CONFIG_HWMON is not set
 CONFIG_THERMAL=y
diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c
index b8a7525..69f7f46 100644
--- a/arch/arm/mach-shmobile/board-marzen.c
+++ b/arch/arm/mach-shmobile/board-marzen.c
@@ -30,6 +30,8 @@
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
 #include <linux/smsc911x.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/sh_hspi.h>
 #include <linux/mmc/sh_mobile_sdhi.h>
 #include <linux/mfd/tmio.h>
 #include <mach/hardware.h>
@@ -126,10 +128,27 @@ static struct platform_device thermal_device = {
 	.num_resources	= ARRAY_SIZE(thermal_resources),
 };
 
+/* HSPI */
+static struct resource hspi_resources[] = {
+	[0] = {
+		.start		= 0xFFFC7000,
+		.end		= 0xFFFC7018 - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device hspi_device = {
+	.name	= "sh-hspi",
+	.id	= 0,
+	.resource	= hspi_resources,
+	.num_resources	= ARRAY_SIZE(hspi_resources),
+};
+
 static struct platform_device *marzen_devices[] __initdata = {
 	&eth_device,
 	&sdhi0_device,
 	&thermal_device,
+	&hspi_device,
 };
 
 static void __init marzen_init(void)
@@ -163,6 +182,12 @@ static void __init marzen_init(void)
 	gpio_request(GPIO_FN_SD0_CD, NULL);
 	gpio_request(GPIO_FN_SD0_WP, NULL);
 
+	/* HSPI 0 */
+	gpio_request(GPIO_FN_HSPI_CLK0,	NULL);
+	gpio_request(GPIO_FN_HSPI_CS0,	NULL);
+	gpio_request(GPIO_FN_HSPI_TX0,	NULL);
+	gpio_request(GPIO_FN_HSPI_RX0,	NULL);
+
 	r8a7779_add_standard_devices();
 	platform_add_devices(marzen_devices, ARRAY_SIZE(marzen_devices));
 }
-- 
1.7.10.4


  parent reply	other threads:[~2012-11-01  0:40 UTC|newest]

Thread overview: 35+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-11-01  0:40 [GIT PULL v3] Renesas ARM-based SoC boards for v3.8 Simon Horman
2012-11-01  0:40 ` [PATCH 1/8] ARM: shmobile: kzm9g: enable magnetometer ak8975 Simon Horman
2012-11-01  0:40 ` [PATCH 2/8] ARM: shmobile: kzm9g: enable three-axis digital accelerometer ADXL345 Simon Horman
2012-11-01  0:40 ` [PATCH 3/8] ARM: shmobile: kzm9g: enable DMAEngine on SHDI0 and SDHI2 Simon Horman
2012-11-01  0:40 ` [PATCH 4/8] ARM: shmobile: armadillo800eva: enable restart Simon Horman
2012-11-01  0:40 ` Simon Horman [this message]
2012-11-01  0:40 ` [PATCH 6/8] ARM: mach-shmobile: Use DT_MACHINE for mackerel Simon Horman
2012-11-01  0:40 ` [PATCH 7/8] ARM: shmobile: Remove G3EVM machine support Simon Horman
2012-11-01  0:40 ` [PATCH 8/8] ARM: shmobile: Remove G4EVM " Simon Horman
2012-11-06  2:32 ` [GIT PULL v3] Renesas ARM-based SoC boards for v3.8 Simon Horman
2012-11-06 14:07 ` Olof Johansson
2012-11-09  7:31 ` [GIT PULL v3] Renesas ARM-based SoC boards for v3.8 #2 Simon Horman
2012-11-09  7:31   ` [PATCH 1/7] ARM: shmobile: marzen: add USB phy support Simon Horman
2013-03-13 21:19     ` Sergei Shtylyov
2013-03-14  0:44       ` Kuninori Morimoto
2013-03-14 13:20         ` Sergei Shtylyov
2012-11-09  7:31   ` [PATCH 2/7] ARM: shmobile: marzen: add USB EHCI driver support Simon Horman
2013-03-13 20:44     ` Sergei Shtylyov
2013-03-14  0:29       ` Kuninori Morimoto
2013-03-14  1:09         ` Kuninori Morimoto
2013-03-14 13:42         ` Sergei Shtylyov
2013-03-15  0:52           ` Kuninori Morimoto
2013-03-15 12:51             ` Sergei Shtylyov
2012-11-09  7:31   ` [PATCH 3/7] ARM: shmobile: marzen: add USB OHCI " Simon Horman
2012-11-09  7:31   ` [PATCH 4/7] ARM: shmobile: mackerel: enable DMAEngine on USB Host Simon Horman
2012-11-09  7:31   ` [PATCH 5/7] ARM: shmobile: use FSI driver's audio clock on armadillo800eva Simon Horman
2012-11-09  7:31   ` [PATCH 6/7] ARM: shmobile: use FSI driver's audio clock on mackerel Simon Horman
2012-11-09  7:31   ` [PATCH 7/7] ARM: shmobile: use FSI driver's audio clock on ap4evb Simon Horman
2012-11-12 21:11   ` [GIT PULL v3] Renesas ARM-based SoC boards for v3.8 #2 Arnd Bergmann
2012-11-13  2:58     ` Simon Horman
2012-11-13  5:36     ` Mark Brown
2012-11-13  8:48       ` Arnd Bergmann
2012-11-13 10:01         ` Mark Brown
2012-11-13 10:27           ` Arnd Bergmann
2012-11-14  2:15             ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1351730411-1874-6-git-send-email-horms@verge.net.au \
    --to=horms@verge.net.au \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).