[PATCH v3 00/29] Add OF support to the sh-sci serial port driver

[PATCH v3 00/29] Add OF support to the sh-sci serial port driver

[Laurent Pinchart]

Hello,

This is the third version of the patch set adds device tree bindings for the
sh sci serial port devices and adds OF parsing to the sh-sci driver.

The bindings are based on Bastian Hecht's proposal (see
http://www.spinics.net/lists/arm-kernel/msg228129.html). The approach taken
here is more minimalistic: instead of describing all hardware characteristics
that vary between the SCI device revisions in DT (such as registers layout),
that information is stored in the driver and selected based on the compatible
property value. Only SCI revisions used on ARM devices are supported through
DT, as DT support for SuperH is nowhere down the line.

Patches 01/29 to 06/29 clean up the sh-sci driver. Patches 07/29 to 27/29
replace memory and interrupt resources passed through platform data with
platform resources. Beside replacing a custom mechanism with a standard one,
it will also make the DT parsing code simpler as resource allocation will be
shared between DT and non-DT code paths. Finally, patches 28/29 to 29/29 add
OF parsing to the sh-sci driver and create DT bindings documentation.

The patches have been test on a Lager board (r8a7790-based) and a Koelsch board
(r8a7791-based). Support for other SoCs will be added as needed. Note that all
current Renesas ARM SoCs seem to be compatible with the generic (H)SCI(F)(AB)
devices, but the plan is for their DT bindings to list the SoC-specific version
in case incompatibilities are found later.

The series will need to be split in three parts to go to mainline. Patches
01/29 to 07/29 should go through Greg's tree, patches 08/29 to 26/29 through
Simon's tree, and patches 27/29 to 29/29 through Greg's tree again. Greg, when
applying the first seven patches, could you please provide a stable branch for
Simon to base his branch on (I can send you a pull request rebased on top of
v3.13-rc1 if that can help) ? Simon will in turn provide a stable branch to
base the last three patches on.

Changes compared to v2:

- Fix indentation in 12/29
- Remove interrupt-parent property from the DT bindings documentation
- Remove -generic suffix from DT compatible values
- Reword the DT bindings documentation based on comments received on v2
- Added r8a7791 support to the DT bindings

Changes compared to v1:

- Patches 04/29 to 27/29 have been added
- Multi-interrupt support has been removed from the DT bindings as they don't
  support any SoC requiring multi-interrupt yet

Cc: devicetree@vger.kernel.org

Bastian Hecht (1):
  serial: sh-sci: Add OF support

Laurent Pinchart (28):
  serial: sh-sci: Sort headers alphabetically
  serial: sh-sci: Remove baud rate calculation algorithm 5
  serial: sh-sci: Simplify baud rate calculation algorithms
  serial: sh-sci: Remove duplicate interrupt check in verify port op
  serial: sh-sci: Set the UPF_FIXED_PORT flag
  serial: sh-sci: Don't check IRQ in verify port operation
  serial: sh-sci: Support resources passed through platform resources
  ARM: shmobile: sh7372: Use macros to declare SCIF devices
  ARM: shmobile: sh73a0: Use macros to declare SCIF devices
  ARM: shmobile: r8a7740: Use macros to declare SCIF devices
  ARM: shmobile: r8a7779: Use macros to declare SCIF devices
  ARM: shmobile: r7s72100: Don't define SCIF platform data in an array
  ARM: shmobile: r8a73a4: Don't define SCIF platform data in an array
  ARM: shmobile: r8a7778: Don't define SCIF platform data in an array
  ARM: shmobile: r8a7790: Don't define SCIF platform data in an array
  ARM: shmobile: r8a7791: Don't define SCIF platform data in an array
  ARM: shmobile: sh7372: Declare SCIF register base and IRQ as resources
  ARM: shmobile: sh73a0: Declare SCIF register base and IRQ as resources
  ARM: shmobile: r7s72100: Declare SCIF register base and IRQ as
    resources
  ARM: shmobile: r8a73a4: Declare SCIF register base and IRQ as
    resources
  ARM: shmobile: r8a7740: Declare SCIF register base and IRQ as
    resources
  ARM: shmobile: r8a7778: Declare SCIF register base and IRQ as
    resources
  ARM: shmobile: r8a7779: Declare SCIF register base and IRQ as
    resources
  ARM: shmobile: r8a7790: Declare SCIF register base and IRQ as
    resources
  ARM: shmobile: r8a7791: Declare SCIF register base and IRQ as
    resources
  sh: Declare SCIF register base and IRQ as resources
  serial: sh-sci: Remove platform data mapbase and irqs fields
  serial: sh-sci: Add device tree bindings documentation

 .../bindings/serial/renesas,sci-serial.txt         |  46 ++++
 arch/arm/mach-shmobile/setup-r7s72100.c            |  63 +++---
 arch/arm/mach-shmobile/setup-r8a73a4.c             |  65 +++---
 arch/arm/mach-shmobile/setup-r8a7740.c             | 196 +++--------------
 arch/arm/mach-shmobile/setup-r8a7778.c             |  45 ++--
 arch/arm/mach-shmobile/setup-r8a7779.c             | 129 +++--------
 arch/arm/mach-shmobile/setup-r8a7790.c             | 117 +++++-----
 arch/arm/mach-shmobile/setup-r8a7791.c             | 130 +++++------
 arch/arm/mach-shmobile/setup-sh7372.c              | 161 +++-----------
 arch/arm/mach-shmobile/setup-sh73a0.c              | 192 +++--------------
 arch/sh/kernel/cpu/sh2/setup-sh7619.c              |  27 ++-
 arch/sh/kernel/cpu/sh2a/setup-mxg.c                |   9 +-
 arch/sh/kernel/cpu/sh2a/setup-sh7201.c             |  72 +++++--
 arch/sh/kernel/cpu/sh2a/setup-sh7203.c             |  36 +++-
 arch/sh/kernel/cpu/sh2a/setup-sh7206.c             |  36 +++-
 arch/sh/kernel/cpu/sh2a/setup-sh7264.c             |  96 +++++++--
 arch/sh/kernel/cpu/sh2a/setup-sh7269.c             |  96 +++++++--
 arch/sh/kernel/cpu/sh3/setup-sh7705.c              |  18 +-
 arch/sh/kernel/cpu/sh3/setup-sh770x.c              |  27 ++-
 arch/sh/kernel/cpu/sh3/setup-sh7710.c              |  18 +-
 arch/sh/kernel/cpu/sh3/setup-sh7720.c              |  18 +-
 arch/sh/kernel/cpu/sh4/setup-sh4-202.c             |  15 +-
 arch/sh/kernel/cpu/sh4/setup-sh7750.c              |  18 +-
 arch/sh/kernel/cpu/sh4/setup-sh7760.c              |  58 +++--
 arch/sh/kernel/cpu/sh4a/setup-sh7343.c             |  36 +++-
 arch/sh/kernel/cpu/sh4a/setup-sh7366.c             |   9 +-
 arch/sh/kernel/cpu/sh4a/setup-sh7722.c             |  27 ++-
 arch/sh/kernel/cpu/sh4a/setup-sh7723.c             |  54 +++--
 arch/sh/kernel/cpu/sh4a/setup-sh7724.c             |  54 +++--
 arch/sh/kernel/cpu/sh4a/setup-sh7734.c             |  66 ++++--
 arch/sh/kernel/cpu/sh4a/setup-sh7757.c             |  27 ++-
 arch/sh/kernel/cpu/sh4a/setup-sh7763.c             |  27 ++-
 arch/sh/kernel/cpu/sh4a/setup-sh7770.c             |  90 ++++++--
 arch/sh/kernel/cpu/sh4a/setup-sh7780.c             |  18 +-
 arch/sh/kernel/cpu/sh4a/setup-sh7785.c             |  54 +++--
 arch/sh/kernel/cpu/sh4a/setup-sh7786.c             |  82 +++++--
 arch/sh/kernel/cpu/sh4a/setup-shx3.c               |  45 ++--
 arch/sh/kernel/cpu/sh5/setup-sh5.c                 |  11 +-
 drivers/tty/serial/sh-sci.c                        | 238 ++++++++++++++++-----
 include/linux/serial_sci.h                         |  35 +--
 40 files changed, 1447 insertions(+), 1114 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/serial/renesas,sci-serial.txt

-- 
Regards,

Laurent Pinchart

[PATCH v3 01/29] serial: sh-sci: Sort headers alphabetically

[Laurent Pinchart]

This helps locating duplicates.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
---
 drivers/tty/serial/sh-sci.c | 42 +++++++++++++++++++++---------------------
 1 file changed, 21 insertions(+), 21 deletions(-)

diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 5377502..280753f 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -23,35 +23,35 @@
 
 #undef DEBUG
 
-#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/console.h>
+#include <linux/ctype.h>
+#include <linux/cpufreq.h>
+#include <linux/delay.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
+#include <linux/err.h>
 #include <linux/errno.h>
-#include <linux/sh_dma.h>
-#include <linux/timer.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
 #include <linux/interrupt.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/serial.h>
-#include <linux/major.h>
-#include <linux/string.h>
-#include <linux/sysrq.h>
 #include <linux/ioport.h>
+#include <linux/major.h>
+#include <linux/module.h>
 #include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/console.h>
-#include <linux/platform_device.h>
-#include <linux/serial_sci.h>
 #include <linux/notifier.h>
+#include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
-#include <linux/cpufreq.h>
-#include <linux/clk.h>
-#include <linux/ctype.h>
-#include <linux/err.h>
-#include <linux/dmaengine.h>
-#include <linux/dma-mapping.h>
 #include <linux/scatterlist.h>
+#include <linux/serial.h>
+#include <linux/serial_sci.h>
+#include <linux/sh_dma.h>
 #include <linux/slab.h>
-#include <linux/gpio.h>
+#include <linux/string.h>
+#include <linux/sysrq.h>
+#include <linux/timer.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
 
 #ifdef CONFIG_SUPERH
 #include <asm/sh_bios.h>
-- 
1.8.3.2

[PATCH v3 02/29] serial: sh-sci: Remove baud rate calculation algorithm 5

[Laurent Pinchart]

The algorithm isn't used, remove it.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
---
 drivers/tty/serial/sh-sci.c | 2 --
 include/linux/serial_sci.h  | 1 -
 2 files changed, 3 deletions(-)

diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 280753f..2fc1a0e 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -1820,8 +1820,6 @@ static unsigned int sci_scbrr_calc(unsigned int algo_id, unsigned int bps,
 		return (((freq * 2) + 16 * bps) / (16 * bps) - 1);
 	case SCBRR_ALGO_4:
 		return (((freq * 2) + 16 * bps) / (32 * bps) - 1);
-	case SCBRR_ALGO_5:
-		return (((freq * 1000 / 32) / bps) - 1);
 	}
 
 	/* Warn, but use a safe default */
diff --git a/include/linux/serial_sci.h b/include/linux/serial_sci.h
index d340497..803068d 100644
--- a/include/linux/serial_sci.h
+++ b/include/linux/serial_sci.h
@@ -15,7 +15,6 @@ enum {
 	SCBRR_ALGO_2,		/* ((clk + 16 * bps) / (32 * bps) - 1) */
 	SCBRR_ALGO_3,		/* (((clk * 2) + 16 * bps) / (16 * bps) - 1) */
 	SCBRR_ALGO_4,		/* (((clk * 2) + 16 * bps) / (32 * bps) - 1) */
-	SCBRR_ALGO_5,		/* (((clk * 1000 / 32) / bps) - 1) */
 	SCBRR_ALGO_6,		/* HSCIF variable sample rate algorithm */
 };
 
-- 
1.8.3.2

[PATCH v3 03/29] serial: sh-sci: Simplify baud rate calculation algorithms

[Laurent Pinchart]

Rewrite the baud rate register value calculations in easier to read
forms. The computed value isn't modified.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
---
 drivers/tty/serial/sh-sci.c | 8 ++++----
 include/linux/serial_sci.h  | 8 ++++----
 2 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 2fc1a0e..91ce9214b 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -1813,13 +1813,13 @@ static unsigned int sci_scbrr_calc(unsigned int algo_id, unsigned int bps,
 {
 	switch (algo_id) {
 	case SCBRR_ALGO_1:
-		return ((freq + 16 * bps) / (16 * bps) - 1);
+		return freq / (16 * bps);
 	case SCBRR_ALGO_2:
-		return ((freq + 16 * bps) / (32 * bps) - 1);
+		return DIV_ROUND_CLOSEST(freq, 32 * bps) - 1;
 	case SCBRR_ALGO_3:
-		return (((freq * 2) + 16 * bps) / (16 * bps) - 1);
+		return freq / (8 * bps);
 	case SCBRR_ALGO_4:
-		return (((freq * 2) + 16 * bps) / (32 * bps) - 1);
+		return DIV_ROUND_CLOSEST(freq, 16 * bps) - 1;
 	}
 
 	/* Warn, but use a safe default */
diff --git a/include/linux/serial_sci.h b/include/linux/serial_sci.h
index 803068d..eb787d4 100644
--- a/include/linux/serial_sci.h
+++ b/include/linux/serial_sci.h
@@ -11,10 +11,10 @@
 #define SCIx_NOT_SUPPORTED	(-1)
 
 enum {
-	SCBRR_ALGO_1,		/* ((clk + 16 * bps) / (16 * bps) - 1) */
-	SCBRR_ALGO_2,		/* ((clk + 16 * bps) / (32 * bps) - 1) */
-	SCBRR_ALGO_3,		/* (((clk * 2) + 16 * bps) / (16 * bps) - 1) */
-	SCBRR_ALGO_4,		/* (((clk * 2) + 16 * bps) / (32 * bps) - 1) */
+	SCBRR_ALGO_1,		/* clk / (16 * bps) */
+	SCBRR_ALGO_2,		/* DIV_ROUND_CLOSEST(clk, 32 * bps) - 1 */
+	SCBRR_ALGO_3,		/* clk / (8 * bps) */
+	SCBRR_ALGO_4,		/* DIV_ROUND_CLOSEST(clk, 16 * bps) - 1 */
 	SCBRR_ALGO_6,		/* HSCIF variable sample rate algorithm */
 };
 
-- 
1.8.3.2

[PATCH v3 04/29] serial: sh-sci: Remove duplicate interrupt check in verify port op

[Laurent Pinchart]

The driver checks if the interrupt number is greater than nr_irqs and
returns an error in that case. The same check is already performed by
the caller, remove it.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
---
 drivers/tty/serial/sh-sci.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 91ce9214b..73b329380 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -2115,7 +2115,7 @@ static int sci_verify_port(struct uart_port *port, struct serial_struct *ser)
 {
 	struct sci_port *s = to_sci_port(port);
 
-	if (ser->irq != s->cfg->irqs[SCIx_TXI_IRQ] || ser->irq > nr_irqs)
+	if (ser->irq != s->cfg->irqs[SCIx_TXI_IRQ])
 		return -EINVAL;
 	if (ser->baud_base < 2400)
 		/* No paper tape reader for Mitch.. */
-- 
1.8.3.2

[PATCH v3 05/29] serial: sh-sci: Set the UPF_FIXED_PORT flag

[Laurent Pinchart]

The base address, IRQ and baud rate generator parent clock rate can't be
changed by userspace. Mark the port as fixed.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
---
 drivers/tty/serial/sh-sci.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 73b329380..47b0ee6 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -2243,7 +2243,7 @@ static int sci_init_single(struct platform_device *dev,
 
 	port->mapbase		= p->mapbase;
 	port->type		= p->type;
-	port->flags		= p->flags;
+	port->flags		= UPF_FIXED_PORT | p->flags;
 	port->regshift		= p->regshift;
 
 	/*
-- 
1.8.3.2

[PATCH v3 06/29] serial: sh-sci: Don't check IRQ in verify port operation

[Laurent Pinchart]

The IRQ number can't be modified by the user as the port is fixed.
There's no need to check the new IRQ number as it will be ignored by the
core.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
---
 drivers/tty/serial/sh-sci.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 47b0ee6..b0c9d24 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -2113,10 +2113,6 @@ static void sci_config_port(struct uart_port *port, int flags)
 
 static int sci_verify_port(struct uart_port *port, struct serial_struct *ser)
 {
-	struct sci_port *s = to_sci_port(port);
-
-	if (ser->irq != s->cfg->irqs[SCIx_TXI_IRQ])
-		return -EINVAL;
 	if (ser->baud_base < 2400)
 		/* No paper tape reader for Mitch.. */
 		return -EINVAL;
-- 
1.8.3.2

[PATCH v3 07/29] serial: sh-sci: Support resources passed through platform resources

[Laurent Pinchart]

Memory and IRQ resources are currently passed to the driver through
platform data. Support passing them through the standard platform
resources mechanism instead. This deprecates platform data resources.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
---
 drivers/tty/serial/sh-sci.c | 65 ++++++++++++++++++++++++++++++++++-----------
 include/linux/serial_sci.h  |  8 +++---
 2 files changed, 53 insertions(+), 20 deletions(-)

diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index b0c9d24..c5abe5c 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -74,6 +74,7 @@ struct sci_port {
 	/* Function clock */
 	struct clk		*fclk;
 
+	int			irqs[SCIx_NR_IRQS];
 	char			*irqstr[SCIx_NR_IRQS];
 	char			*gpiostr[SCIx_NR_FNS];
 
@@ -1075,19 +1076,19 @@ static int sci_request_irq(struct sci_port *port)
 
 	for (i = j = 0; i < SCIx_NR_IRQS; i++, j++) {
 		struct sci_irq_desc *desc;
-		unsigned int irq;
+		int irq;
 
 		if (SCIx_IRQ_IS_MUXED(port)) {
 			i = SCIx_MUX_IRQ;
 			irq = up->irq;
 		} else {
-			irq = port->cfg->irqs[i];
+			irq = port->irqs[i];
 
 			/*
 			 * Certain port types won't support all of the
 			 * available interrupt sources.
 			 */
-			if (unlikely(!irq))
+			if (unlikely(irq < 0))
 				continue;
 		}
 
@@ -1112,7 +1113,7 @@ static int sci_request_irq(struct sci_port *port)
 
 out_noirq:
 	while (--i >= 0)
-		free_irq(port->cfg->irqs[i], port);
+		free_irq(port->irqs[i], port);
 
 out_nomem:
 	while (--j >= 0)
@@ -1130,16 +1131,16 @@ static void sci_free_irq(struct sci_port *port)
 	 * IRQ first.
 	 */
 	for (i = 0; i < SCIx_NR_IRQS; i++) {
-		unsigned int irq = port->cfg->irqs[i];
+		int irq = port->irqs[i];
 
 		/*
 		 * Certain port types won't support all of the available
 		 * interrupt sources.
 		 */
-		if (unlikely(!irq))
+		if (unlikely(irq < 0))
 			continue;
 
-		free_irq(port->cfg->irqs[i], port);
+		free_irq(port->irqs[i], port);
 		kfree(port->irqstr[i]);
 
 		if (SCIx_IRQ_IS_MUXED(port)) {
@@ -1655,7 +1656,7 @@ static void rx_timer_fn(unsigned long arg)
 
 	if (port->type = PORT_SCIFA || port->type = PORT_SCIFB) {
 		scr &= ~0x4000;
-		enable_irq(s->cfg->irqs[1]);
+		enable_irq(s->irqs[SCIx_RXI_IRQ]);
 	}
 	serial_port_out(port, SCSCR, scr | SCSCR_RIE);
 	dev_dbg(port->dev, "DMA Rx timed out\n");
@@ -2145,11 +2146,12 @@ static struct uart_ops sci_uart_ops = {
 };
 
 static int sci_init_single(struct platform_device *dev,
-				     struct sci_port *sci_port,
-				     unsigned int index,
-				     struct plat_sci_port *p)
+			   struct sci_port *sci_port, unsigned int index,
+			   struct plat_sci_port *p, bool early)
 {
 	struct uart_port *port = &sci_port->port;
+	const struct resource *res;
+	unsigned int i;
 	int ret;
 
 	sci_port->cfg	= p;
@@ -2158,6 +2160,38 @@ static int sci_init_single(struct platform_device *dev,
 	port->iotype	= UPIO_MEM;
 	port->line	= index;
 
+	if (dev->num_resources) {
+		/* Device has resources, use them. */
+		res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+		if (res = NULL)
+			return -ENOMEM;
+
+		port->mapbase = res->start;
+
+		for (i = 0; i < ARRAY_SIZE(sci_port->irqs); ++i)
+			sci_port->irqs[i] = platform_get_irq(dev, i);
+
+		/* The SCI generates several interrupts. They can be muxed
+		 * together or connected to different interrupt lines. In the
+		 * muxed case only one interrupt resource is specified. In the
+		 * non-muxed case three or four interrupt resources are
+		 * specified, as the BRI interrupt is optional.
+		 */
+		if (sci_port->irqs[0] < 0)
+			return -ENXIO;
+
+		if (sci_port->irqs[1] < 0) {
+			sci_port->irqs[1] = sci_port->irqs[0];
+			sci_port->irqs[2] = sci_port->irqs[0];
+			sci_port->irqs[3] = sci_port->irqs[0];
+		}
+	} else {
+		/* No resources, use old-style platform data. */
+		port->mapbase = p->mapbase;
+		for (i = 0; i < ARRAY_SIZE(sci_port->irqs); ++i)
+			sci_port->irqs[i] = p->irqs[i] ? p->irqs[i] : -ENXIO;
+	}
+
 	switch (p->type) {
 	case PORT_SCIFB:
 		port->fifosize = 256;
@@ -2182,7 +2216,7 @@ static int sci_init_single(struct platform_device *dev,
 			return ret;
 	}
 
-	if (dev) {
+	if (!early) {
 		sci_port->iclk = clk_get(&dev->dev, "sci_ick");
 		if (IS_ERR(sci_port->iclk)) {
 			sci_port->iclk = clk_get(&dev->dev, "peripheral_clk");
@@ -2237,7 +2271,6 @@ static int sci_init_single(struct platform_device *dev,
 		p->error_mask |= (1 << p->overrun_bit);
 	}
 
-	port->mapbase		= p->mapbase;
 	port->type		= p->type;
 	port->flags		= UPF_FIXED_PORT | p->flags;
 	port->regshift		= p->regshift;
@@ -2249,7 +2282,7 @@ static int sci_init_single(struct platform_device *dev,
 	 *
 	 * For the muxed case there's nothing more to do.
 	 */
-	port->irq		= p->irqs[SCIx_RXI_IRQ];
+	port->irq		= sci_port->irqs[SCIx_RXI_IRQ];
 	port->irqflags		= 0;
 
 	port->serial_in		= sci_serial_in;
@@ -2381,7 +2414,7 @@ static int sci_probe_earlyprintk(struct platform_device *pdev)
 
 	early_serial_console.index = pdev->id;
 
-	sci_init_single(NULL, &sci_ports[pdev->id], pdev->id, cfg);
+	sci_init_single(pdev, &sci_ports[pdev->id], pdev->id, cfg, true);
 
 	serial_console_setup(&early_serial_console, early_serial_buf);
 
@@ -2448,7 +2481,7 @@ static int sci_probe_single(struct platform_device *dev,
 		return -EINVAL;
 	}
 
-	ret = sci_init_single(dev, sciport, index, p);
+	ret = sci_init_single(dev, sciport, index, p, false);
 	if (ret)
 		return ret;
 
diff --git a/include/linux/serial_sci.h b/include/linux/serial_sci.h
index eb787d4..68cf0bf 100644
--- a/include/linux/serial_sci.h
+++ b/include/linux/serial_sci.h
@@ -107,10 +107,10 @@ enum {
 }
 
 #define SCIx_IRQ_IS_MUXED(port)			\
-	((port)->cfg->irqs[SCIx_ERI_IRQ] =	\
-	 (port)->cfg->irqs[SCIx_RXI_IRQ]) ||	\
-	((port)->cfg->irqs[SCIx_ERI_IRQ] &&	\
-	 !(port)->cfg->irqs[SCIx_RXI_IRQ])
+	((port)->irqs[SCIx_ERI_IRQ] =	\
+	 (port)->irqs[SCIx_RXI_IRQ]) ||	\
+	((port)->irqs[SCIx_ERI_IRQ] &&	\
+	 ((port)->irqs[SCIx_RXI_IRQ] < 0))
 /*
  * SCI register subset common for all port types.
  * Not all registers will exist on all parts.
-- 
1.8.3.2

[PATCH v3 08/29] ARM: shmobile: sh7372: Use macros to declare SCIF devices

[Laurent Pinchart]

Replace copy-n-paste SCIF platform data and device declaration with a
macro. This reduces the amount of code and improves readability.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 arch/arm/mach-shmobile/setup-sh7372.c | 156 ++++++----------------------------
 1 file changed, 25 insertions(+), 131 deletions(-)

diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c
index 3118783..77627dd 100644
--- a/arch/arm/mach-shmobile/setup-sh7372.c
+++ b/arch/arm/mach-shmobile/setup-sh7372.c
@@ -86,138 +86,32 @@ void __init sh7372_pinmux_init(void)
 	platform_device_register(&sh7372_pfc_device);
 }
 
-/* SCIFA0 */
-static struct plat_sci_port scif0_platform_data = {
-	.mapbase	= 0xe6c40000,
-	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE,
-	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIFA,
-	.irqs		= { evt2irq(0x0c00), evt2irq(0x0c00),
-			    evt2irq(0x0c00), evt2irq(0x0c00) },
-};
-
-static struct platform_device scif0_device = {
-	.name		= "sh-sci",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &scif0_platform_data,
-	},
-};
-
-/* SCIFA1 */
-static struct plat_sci_port scif1_platform_data = {
-	.mapbase	= 0xe6c50000,
-	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE,
-	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIFA,
-	.irqs		= { evt2irq(0x0c20), evt2irq(0x0c20),
-			    evt2irq(0x0c20), evt2irq(0x0c20) },
-};
-
-static struct platform_device scif1_device = {
-	.name		= "sh-sci",
-	.id		= 1,
-	.dev		= {
-		.platform_data	= &scif1_platform_data,
-	},
-};
-
-/* SCIFA2 */
-static struct plat_sci_port scif2_platform_data = {
-	.mapbase	= 0xe6c60000,
-	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE,
-	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIFA,
-	.irqs		= { evt2irq(0x0c40), evt2irq(0x0c40),
-			    evt2irq(0x0c40), evt2irq(0x0c40) },
-};
-
-static struct platform_device scif2_device = {
-	.name		= "sh-sci",
-	.id		= 2,
-	.dev		= {
-		.platform_data	= &scif2_platform_data,
-	},
-};
-
-/* SCIFA3 */
-static struct plat_sci_port scif3_platform_data = {
-	.mapbase	= 0xe6c70000,
-	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE,
-	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIFA,
-	.irqs		= { evt2irq(0x0c60), evt2irq(0x0c60),
-			    evt2irq(0x0c60), evt2irq(0x0c60) },
-};
-
-static struct platform_device scif3_device = {
-	.name		= "sh-sci",
-	.id		= 3,
-	.dev		= {
-		.platform_data	= &scif3_platform_data,
-	},
-};
-
-/* SCIFA4 */
-static struct plat_sci_port scif4_platform_data = {
-	.mapbase	= 0xe6c80000,
-	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE,
-	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIFA,
-	.irqs		= { evt2irq(0x0d20), evt2irq(0x0d20),
-			    evt2irq(0x0d20), evt2irq(0x0d20) },
-};
-
-static struct platform_device scif4_device = {
-	.name		= "sh-sci",
-	.id		= 4,
-	.dev		= {
-		.platform_data	= &scif4_platform_data,
-	},
-};
-
-/* SCIFA5 */
-static struct plat_sci_port scif5_platform_data = {
-	.mapbase	= 0xe6cb0000,
-	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE,
-	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIFA,
-	.irqs		= { evt2irq(0x0d40), evt2irq(0x0d40),
-			    evt2irq(0x0d40), evt2irq(0x0d40) },
-};
-
-static struct platform_device scif5_device = {
-	.name		= "sh-sci",
-	.id		= 5,
-	.dev		= {
-		.platform_data	= &scif5_platform_data,
-	},
-};
-
-/* SCIFB */
-static struct plat_sci_port scif6_platform_data = {
-	.mapbase	= 0xe6c30000,
-	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE,
-	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIFB,
-	.irqs		= { evt2irq(0x0d60), evt2irq(0x0d60),
-			    evt2irq(0x0d60), evt2irq(0x0d60) },
-};
+/* SCIF */
+#define SH7372_SCIF(scif_type, index, baseaddr, irq)		\
+static struct plat_sci_port scif##index##_platform_data = {	\
+	.type		= scif_type,				\
+	.mapbase	= baseaddr,				\
+	.flags		= UPF_BOOT_AUTOCONF,			\
+	.irqs		= SCIx_IRQ_MUXED(irq),			\
+	.scbrr_algo_id	= SCBRR_ALGO_4,				\
+	.scscr		= SCSCR_RE | SCSCR_TE,			\
+};								\
+								\
+static struct platform_device scif##index##_device = {		\
+	.name		= "sh-sci",				\
+	.id		= index,				\
+	.dev		= {					\
+		.platform_data	= &scif##index##_platform_data,	\
+	},							\
+}
 
-static struct platform_device scif6_device = {
-	.name		= "sh-sci",
-	.id		= 6,
-	.dev		= {
-		.platform_data	= &scif6_platform_data,
-	},
-};
+SH7372_SCIF(PORT_SCIFA, 0, 0xe6c40000, evt2irq(0x0c00));
+SH7372_SCIF(PORT_SCIFA, 1, 0xe6c50000, evt2irq(0x0c20));
+SH7372_SCIF(PORT_SCIFA, 2, 0xe6c60000, evt2irq(0x0c40));
+SH7372_SCIF(PORT_SCIFA, 3, 0xe6c70000, evt2irq(0x0c60));
+SH7372_SCIF(PORT_SCIFA, 4, 0xe6c80000, evt2irq(0x0d20));
+SH7372_SCIF(PORT_SCIFA, 5, 0xe6cb0000, evt2irq(0x0d40));
+SH7372_SCIF(PORT_SCIFB, 6, 0xe6c30000, evt2irq(0x0d60));
 
 /* CMT */
 static struct sh_timer_config cmt2_platform_data = {
-- 
1.8.3.2

[PATCH v3 09/29] ARM: shmobile: sh73a0: Use macros to declare SCIF devices

[Laurent Pinchart]

Replace copy-n-paste SCIF platform data and device declaration with a
macro. This reduces the amount of code and improves readability.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 arch/arm/mach-shmobile/setup-sh73a0.c | 187 +++++-----------------------------
 1 file changed, 27 insertions(+), 160 deletions(-)

diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c
index 65151c4..9c94f34 100644
--- a/arch/arm/mach-shmobile/setup-sh73a0.c
+++ b/arch/arm/mach-shmobile/setup-sh73a0.c
@@ -71,167 +71,34 @@ void __init sh73a0_pinmux_init(void)
 					ARRAY_SIZE(pfc_resources));
 }
 
-static struct plat_sci_port scif0_platform_data = {
-	.mapbase	= 0xe6c40000,
-	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE,
-	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIFA,
-	.irqs		= { gic_spi(72), gic_spi(72),
-			    gic_spi(72), gic_spi(72) },
-};
-
-static struct platform_device scif0_device = {
-	.name		= "sh-sci",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &scif0_platform_data,
-	},
-};
-
-static struct plat_sci_port scif1_platform_data = {
-	.mapbase	= 0xe6c50000,
-	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE,
-	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIFA,
-	.irqs		= { gic_spi(73), gic_spi(73),
-			    gic_spi(73), gic_spi(73) },
-};
-
-static struct platform_device scif1_device = {
-	.name		= "sh-sci",
-	.id		= 1,
-	.dev		= {
-		.platform_data	= &scif1_platform_data,
-	},
-};
-
-static struct plat_sci_port scif2_platform_data = {
-	.mapbase	= 0xe6c60000,
-	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE,
-	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIFA,
-	.irqs		= { gic_spi(74), gic_spi(74),
-			    gic_spi(74), gic_spi(74) },
-};
-
-static struct platform_device scif2_device = {
-	.name		= "sh-sci",
-	.id		= 2,
-	.dev		= {
-		.platform_data	= &scif2_platform_data,
-	},
-};
-
-static struct plat_sci_port scif3_platform_data = {
-	.mapbase	= 0xe6c70000,
-	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE,
-	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIFA,
-	.irqs		= { gic_spi(75), gic_spi(75),
-			    gic_spi(75), gic_spi(75) },
-};
-
-static struct platform_device scif3_device = {
-	.name		= "sh-sci",
-	.id		= 3,
-	.dev		= {
-		.platform_data	= &scif3_platform_data,
-	},
-};
-
-static struct plat_sci_port scif4_platform_data = {
-	.mapbase	= 0xe6c80000,
-	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE,
-	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIFA,
-	.irqs		= { gic_spi(78), gic_spi(78),
-			    gic_spi(78), gic_spi(78) },
-};
-
-static struct platform_device scif4_device = {
-	.name		= "sh-sci",
-	.id		= 4,
-	.dev		= {
-		.platform_data	= &scif4_platform_data,
-	},
-};
-
-static struct plat_sci_port scif5_platform_data = {
-	.mapbase	= 0xe6cb0000,
-	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE,
-	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIFA,
-	.irqs		= { gic_spi(79), gic_spi(79),
-			    gic_spi(79), gic_spi(79) },
-};
-
-static struct platform_device scif5_device = {
-	.name		= "sh-sci",
-	.id		= 5,
-	.dev		= {
-		.platform_data	= &scif5_platform_data,
-	},
-};
-
-static struct plat_sci_port scif6_platform_data = {
-	.mapbase	= 0xe6cc0000,
-	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE,
-	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIFA,
-	.irqs		= { gic_spi(156), gic_spi(156),
-			    gic_spi(156), gic_spi(156) },
-};
-
-static struct platform_device scif6_device = {
-	.name		= "sh-sci",
-	.id		= 6,
-	.dev		= {
-		.platform_data	= &scif6_platform_data,
-	},
-};
-
-static struct plat_sci_port scif7_platform_data = {
-	.mapbase	= 0xe6cd0000,
-	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE,
-	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIFA,
-	.irqs		= { gic_spi(143), gic_spi(143),
-			    gic_spi(143), gic_spi(143) },
-};
-
-static struct platform_device scif7_device = {
-	.name		= "sh-sci",
-	.id		= 7,
-	.dev		= {
-		.platform_data	= &scif7_platform_data,
-	},
-};
-
-static struct plat_sci_port scif8_platform_data = {
-	.mapbase	= 0xe6c30000,
-	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE,
-	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIFB,
-	.irqs		= { gic_spi(80), gic_spi(80),
-			    gic_spi(80), gic_spi(80) },
-};
+/* SCIF */
+#define SH73A0_SCIF(scif_type, index, baseaddr, irq)		\
+static struct plat_sci_port scif##index##_platform_data = {	\
+	.type		= scif_type,				\
+	.mapbase	= baseaddr,				\
+	.flags		= UPF_BOOT_AUTOCONF,			\
+	.irqs		= SCIx_IRQ_MUXED(irq),			\
+	.scbrr_algo_id	= SCBRR_ALGO_4,				\
+	.scscr		= SCSCR_RE | SCSCR_TE,			\
+};								\
+								\
+static struct platform_device scif##index##_device = {		\
+	.name		= "sh-sci",				\
+	.id		= index,				\
+	.dev		= {					\
+		.platform_data	= &scif##index##_platform_data,	\
+	},							\
+}
 
-static struct platform_device scif8_device = {
-	.name		= "sh-sci",
-	.id		= 8,
-	.dev		= {
-		.platform_data	= &scif8_platform_data,
-	},
-};
+SH73A0_SCIF(PORT_SCIFA, 0, 0xe6c40000, gic_spi(72));
+SH73A0_SCIF(PORT_SCIFA, 1, 0xe6c50000, gic_spi(73));
+SH73A0_SCIF(PORT_SCIFA, 2, 0xe6c60000, gic_spi(74));
+SH73A0_SCIF(PORT_SCIFA, 3, 0xe6c70000, gic_spi(75));
+SH73A0_SCIF(PORT_SCIFA, 4, 0xe6c80000, gic_spi(78));
+SH73A0_SCIF(PORT_SCIFA, 5, 0xe6cb0000, gic_spi(79));
+SH73A0_SCIF(PORT_SCIFA, 6, 0xe6cc0000, gic_spi(156));
+SH73A0_SCIF(PORT_SCIFA, 7, 0xe6cd0000, gic_spi(143));
+SH73A0_SCIF(PORT_SCIFB, 8, 0xe6c30000, gic_spi(80));
 
 static struct sh_timer_config cmt10_platform_data = {
 	.name = "CMT10",
-- 
1.8.3.2

[PATCH v3 10/29] ARM: shmobile: r8a7740: Use macros to declare SCIF devices

[Laurent Pinchart]

Replace copy-n-paste SCIF platform data and device declaration with a
macro. This reduces the amount of code and improves readability.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 arch/arm/mach-shmobile/setup-r8a7740.c | 191 +++++----------------------------
 1 file changed, 29 insertions(+), 162 deletions(-)

diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c
index b7d4b2c..8778b57 100644
--- a/arch/arm/mach-shmobile/setup-r8a7740.c
+++ b/arch/arm/mach-shmobile/setup-r8a7740.c
@@ -203,167 +203,34 @@ static struct platform_device irqpin3_device = {
 	},
 };
 
-/* SCIFA0 */
-static struct plat_sci_port scif0_platform_data = {
-	.mapbase	= 0xe6c40000,
-	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE,
-	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIFA,
-	.irqs		= SCIx_IRQ_MUXED(gic_spi(100)),
-};
-
-static struct platform_device scif0_device = {
-	.name		= "sh-sci",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &scif0_platform_data,
-	},
-};
-
-/* SCIFA1 */
-static struct plat_sci_port scif1_platform_data = {
-	.mapbase	= 0xe6c50000,
-	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE,
-	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIFA,
-	.irqs		= SCIx_IRQ_MUXED(gic_spi(101)),
-};
-
-static struct platform_device scif1_device = {
-	.name		= "sh-sci",
-	.id		= 1,
-	.dev		= {
-		.platform_data	= &scif1_platform_data,
-	},
-};
-
-/* SCIFA2 */
-static struct plat_sci_port scif2_platform_data = {
-	.mapbase	= 0xe6c60000,
-	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE,
-	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIFA,
-	.irqs		= SCIx_IRQ_MUXED(gic_spi(102)),
-};
-
-static struct platform_device scif2_device = {
-	.name		= "sh-sci",
-	.id		= 2,
-	.dev		= {
-		.platform_data	= &scif2_platform_data,
-	},
-};
-
-/* SCIFA3 */
-static struct plat_sci_port scif3_platform_data = {
-	.mapbase	= 0xe6c70000,
-	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE,
-	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIFA,
-	.irqs		= SCIx_IRQ_MUXED(gic_spi(103)),
-};
-
-static struct platform_device scif3_device = {
-	.name		= "sh-sci",
-	.id		= 3,
-	.dev		= {
-		.platform_data	= &scif3_platform_data,
-	},
-};
-
-/* SCIFA4 */
-static struct plat_sci_port scif4_platform_data = {
-	.mapbase	= 0xe6c80000,
-	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE,
-	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIFA,
-	.irqs		= SCIx_IRQ_MUXED(gic_spi(104)),
-};
-
-static struct platform_device scif4_device = {
-	.name		= "sh-sci",
-	.id		= 4,
-	.dev		= {
-		.platform_data	= &scif4_platform_data,
-	},
-};
-
-/* SCIFA5 */
-static struct plat_sci_port scif5_platform_data = {
-	.mapbase	= 0xe6cb0000,
-	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE,
-	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIFA,
-	.irqs		= SCIx_IRQ_MUXED(gic_spi(105)),
-};
-
-static struct platform_device scif5_device = {
-	.name		= "sh-sci",
-	.id		= 5,
-	.dev		= {
-		.platform_data	= &scif5_platform_data,
-	},
-};
-
-/* SCIFA6 */
-static struct plat_sci_port scif6_platform_data = {
-	.mapbase	= 0xe6cc0000,
-	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE,
-	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIFA,
-	.irqs		= SCIx_IRQ_MUXED(gic_spi(106)),
-};
-
-static struct platform_device scif6_device = {
-	.name		= "sh-sci",
-	.id		= 6,
-	.dev		= {
-		.platform_data	= &scif6_platform_data,
-	},
-};
-
-/* SCIFA7 */
-static struct plat_sci_port scif7_platform_data = {
-	.mapbase	= 0xe6cd0000,
-	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE,
-	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIFA,
-	.irqs		= SCIx_IRQ_MUXED(gic_spi(107)),
-};
-
-static struct platform_device scif7_device = {
-	.name		= "sh-sci",
-	.id		= 7,
-	.dev		= {
-		.platform_data	= &scif7_platform_data,
-	},
-};
-
-/* SCIFB */
-static struct plat_sci_port scifb_platform_data = {
-	.mapbase	= 0xe6c30000,
-	.flags		= UPF_BOOT_AUTOCONF,
-	.scscr		= SCSCR_RE | SCSCR_TE,
-	.scbrr_algo_id	= SCBRR_ALGO_4,
-	.type		= PORT_SCIFB,
-	.irqs		= SCIx_IRQ_MUXED(gic_spi(108)),
-};
+/* SCIF */
+#define R8A7740_SCIF(scif_type, index, baseaddr, irq)		\
+static struct plat_sci_port scif##index##_platform_data = {	\
+	.type		= scif_type,				\
+	.mapbase	= baseaddr,				\
+	.flags		= UPF_BOOT_AUTOCONF,			\
+	.irqs		= SCIx_IRQ_MUXED(irq),			\
+	.scbrr_algo_id	= SCBRR_ALGO_4,				\
+	.scscr		= SCSCR_RE | SCSCR_TE,			\
+};								\
+								\
+static struct platform_device scif##index##_device = {		\
+	.name		= "sh-sci",				\
+	.id		= index,				\
+	.dev		= {					\
+		.platform_data	= &scif##index##_platform_data,	\
+	},							\
+}
 
-static struct platform_device scifb_device = {
-	.name		= "sh-sci",
-	.id		= 8,
-	.dev		= {
-		.platform_data	= &scifb_platform_data,
-	},
-};
+R8A7740_SCIF(PORT_SCIFA, 0, 0xe6c40000, gic_spi(100));
+R8A7740_SCIF(PORT_SCIFA, 1, 0xe6c50000, gic_spi(101));
+R8A7740_SCIF(PORT_SCIFA, 2, 0xe6c60000, gic_spi(102));
+R8A7740_SCIF(PORT_SCIFA, 3, 0xe6c70000, gic_spi(103));
+R8A7740_SCIF(PORT_SCIFA, 4, 0xe6c80000, gic_spi(104));
+R8A7740_SCIF(PORT_SCIFA, 5, 0xe6cb0000, gic_spi(105));
+R8A7740_SCIF(PORT_SCIFA, 6, 0xe6cc0000, gic_spi(106));
+R8A7740_SCIF(PORT_SCIFA, 7, 0xe6cd0000, gic_spi(107));
+R8A7740_SCIF(PORT_SCIFB, 8, 0xe6c30000, gic_spi(108));
 
 /* CMT */
 static struct sh_timer_config cmt10_platform_data = {
@@ -528,7 +395,7 @@ static struct platform_device *r8a7740_devices_dt[] __initdata = {
 	&scif5_device,
 	&scif6_device,
 	&scif7_device,
-	&scifb_device,
+	&scif8_device,
 	&cmt10_device,
 };
 
@@ -981,7 +848,7 @@ void __init r8a7740_add_standard_devices(void)
 	rmobile_add_device_to_domain("A3SP",	&scif5_device);
 	rmobile_add_device_to_domain("A3SP",	&scif6_device);
 	rmobile_add_device_to_domain("A3SP",	&scif7_device);
-	rmobile_add_device_to_domain("A3SP",	&scifb_device);
+	rmobile_add_device_to_domain("A3SP",	&scif8_device);
 	rmobile_add_device_to_domain("A3SP",	&i2c1_device);
 }
 
-- 
1.8.3.2

[PATCH v3 11/29] ARM: shmobile: r8a7779: Use macros to declare SCIF devices

[Laurent Pinchart]

Replace copy-n-paste SCIF platform data and device declaration with a
macro. This reduces the amount of code and improves readability.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 arch/arm/mach-shmobile/setup-r8a7779.c | 124 +++++++--------------------------
 1 file changed, 24 insertions(+), 100 deletions(-)

diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c
index 8f94531..df418f1 100644
--- a/arch/arm/mach-shmobile/setup-r8a7779.c
+++ b/arch/arm/mach-shmobile/setup-r8a7779.c
@@ -188,107 +188,31 @@ void __init r8a7779_pinmux_init(void)
 			    ARRAY_SIZE(r8a7779_pinctrl_devices));
 }
 
-static struct plat_sci_port scif0_platform_data = {
-	.mapbase	= 0xffe40000,
-	.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,
-	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_CKE1,
-	.scbrr_algo_id	= SCBRR_ALGO_2,
-	.type		= PORT_SCIF,
-	.irqs		= SCIx_IRQ_MUXED(gic_iid(0x78)),
-};
-
-static struct platform_device scif0_device = {
-	.name		= "sh-sci",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &scif0_platform_data,
-	},
-};
-
-static struct plat_sci_port scif1_platform_data = {
-	.mapbase	= 0xffe41000,
-	.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,
-	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_CKE1,
-	.scbrr_algo_id	= SCBRR_ALGO_2,
-	.type		= PORT_SCIF,
-	.irqs		= SCIx_IRQ_MUXED(gic_iid(0x79)),
-};
-
-static struct platform_device scif1_device = {
-	.name		= "sh-sci",
-	.id		= 1,
-	.dev		= {
-		.platform_data	= &scif1_platform_data,
-	},
-};
-
-static struct plat_sci_port scif2_platform_data = {
-	.mapbase	= 0xffe42000,
-	.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,
-	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_CKE1,
-	.scbrr_algo_id	= SCBRR_ALGO_2,
-	.type		= PORT_SCIF,
-	.irqs		= SCIx_IRQ_MUXED(gic_iid(0x7a)),
-};
-
-static struct platform_device scif2_device = {
-	.name		= "sh-sci",
-	.id		= 2,
-	.dev		= {
-		.platform_data	= &scif2_platform_data,
-	},
-};
-
-static struct plat_sci_port scif3_platform_data = {
-	.mapbase	= 0xffe43000,
-	.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,
-	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_CKE1,
-	.scbrr_algo_id	= SCBRR_ALGO_2,
-	.type		= PORT_SCIF,
-	.irqs		= SCIx_IRQ_MUXED(gic_iid(0x7b)),
-};
-
-static struct platform_device scif3_device = {
-	.name		= "sh-sci",
-	.id		= 3,
-	.dev		= {
-		.platform_data	= &scif3_platform_data,
-	},
-};
-
-static struct plat_sci_port scif4_platform_data = {
-	.mapbase	= 0xffe44000,
-	.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,
-	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_CKE1,
-	.scbrr_algo_id	= SCBRR_ALGO_2,
-	.type		= PORT_SCIF,
-	.irqs		= SCIx_IRQ_MUXED(gic_iid(0x7c)),
-};
-
-static struct platform_device scif4_device = {
-	.name		= "sh-sci",
-	.id		= 4,
-	.dev		= {
-		.platform_data	= &scif4_platform_data,
-	},
-};
-
-static struct plat_sci_port scif5_platform_data = {
-	.mapbase	= 0xffe45000,
-	.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,
-	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_CKE1,
-	.scbrr_algo_id	= SCBRR_ALGO_2,
-	.type		= PORT_SCIF,
-	.irqs		= SCIx_IRQ_MUXED(gic_iid(0x7d)),
-};
+/* SCIF */
+#define R8A7779_SCIF(index, baseaddr, irq)			\
+static struct plat_sci_port scif##index##_platform_data = {	\
+	.type		= PORT_SCIF,				\
+	.mapbase	= baseaddr,				\
+	.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,	\
+	.irqs		= SCIx_IRQ_MUXED(irq),			\
+	.scbrr_algo_id	= SCBRR_ALGO_2,				\
+	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_CKE1,	\
+};								\
+								\
+static struct platform_device scif##index##_device = {		\
+	.name		= "sh-sci",				\
+	.id		= index,				\
+	.dev		= {					\
+		.platform_data	= &scif##index##_platform_data,	\
+	},							\
+}
 
-static struct platform_device scif5_device = {
-	.name		= "sh-sci",
-	.id		= 5,
-	.dev		= {
-		.platform_data	= &scif5_platform_data,
-	},
-};
+R8A7779_SCIF(0, 0xffe40000, gic_iid(0x78));
+R8A7779_SCIF(1, 0xffe41000, gic_iid(0x79));
+R8A7779_SCIF(2, 0xffe42000, gic_iid(0x7a));
+R8A7779_SCIF(3, 0xffe43000, gic_iid(0x7b));
+R8A7779_SCIF(4, 0xffe44000, gic_iid(0x7c));
+R8A7779_SCIF(5, 0xffe45000, gic_iid(0x7d));
 
 /* TMU */
 static struct sh_timer_config tmu00_platform_data = {
-- 
1.8.3.2

[PATCH v3 12/29] ARM: shmobile: r7s72100: Don't define SCIF platform data in an array

[Laurent Pinchart]

The SCIF driver is transitioning to platform resources. Board code will
thus need to define an array of resources for each SCIF device. This is
incompatible with the macro-based SCIF platform data definition as an
array. Rework the macro to define platform data as individual
structures.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 arch/arm/mach-shmobile/setup-r7s72100.c | 49 +++++++++++++++------------------
 1 file changed, 22 insertions(+), 27 deletions(-)

diff --git a/arch/arm/mach-shmobile/setup-r7s72100.c b/arch/arm/mach-shmobile/setup-r7s72100.c
index 55f0b9c..6ae7e32 100644
--- a/arch/arm/mach-shmobile/setup-r7s72100.c
+++ b/arch/arm/mach-shmobile/setup-r7s72100.c
@@ -28,8 +28,8 @@
 #include <mach/r7s72100.h>
 #include <asm/mach/arch.h>
 
-#define SCIF_DATA(index, baseaddr, irq)					\
-[index] = {								\
+#define R7S72100_SCIF(index, baseaddr, irq)				\
+static const struct plat_sci_port scif##index##_platform_data = {	\
 	.type		= PORT_SCIF,					\
 	.regtype	= SCIx_SH2_SCIF_FIFODATA_REGTYPE,		\
 	.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,		\
@@ -40,24 +40,19 @@
 	.irqs		= { irq + 1, irq + 2, irq + 3, irq },		\
 }
 
-enum { SCIF0, SCIF1, SCIF2, SCIF3, SCIF4, SCIF5, SCIF6, SCIF7 };
+R7S72100_SCIF(0, 0xe8007000, gic_iid(221));
+R7S72100_SCIF(1, 0xe8007800, gic_iid(225));
+R7S72100_SCIF(2, 0xe8008000, gic_iid(229));
+R7S72100_SCIF(3, 0xe8008800, gic_iid(233));
+R7S72100_SCIF(4, 0xe8009000, gic_iid(237));
+R7S72100_SCIF(5, 0xe8009800, gic_iid(241));
+R7S72100_SCIF(6, 0xe800a000, gic_iid(245));
+R7S72100_SCIF(7, 0xe800a800, gic_iid(249));
 
-static const struct plat_sci_port scif[] __initconst = {
-	SCIF_DATA(SCIF0, 0xe8007000, gic_iid(221)), /* SCIF0 */
-	SCIF_DATA(SCIF1, 0xe8007800, gic_iid(225)), /* SCIF1 */
-	SCIF_DATA(SCIF2, 0xe8008000, gic_iid(229)), /* SCIF2 */
-	SCIF_DATA(SCIF3, 0xe8008800, gic_iid(233)), /* SCIF3 */
-	SCIF_DATA(SCIF4, 0xe8009000, gic_iid(237)), /* SCIF4 */
-	SCIF_DATA(SCIF5, 0xe8009800, gic_iid(241)), /* SCIF5 */
-	SCIF_DATA(SCIF6, 0xe800a000, gic_iid(245)), /* SCIF6 */
-	SCIF_DATA(SCIF7, 0xe800a800, gic_iid(249)), /* SCIF7 */
-};
-
-static inline void r7s72100_register_scif(int idx)
-{
-	platform_device_register_data(&platform_bus, "sh-sci", idx, &scif[idx],
-				      sizeof(struct plat_sci_port));
-}
+#define r7s72100_register_scif(index)					       \
+	platform_device_register_data(&platform_bus, "sh-sci", index,	       \
+				      &scif##index##_platform_data,	       \
+				      sizeof(scif##index##_platform_data))
 
 
 static struct sh_timer_config mtu2_0_platform_data __initdata = {
@@ -81,14 +76,14 @@ static struct resource mtu2_0_resources[] __initdata = {
 
 void __init r7s72100_add_dt_devices(void)
 {
-	r7s72100_register_scif(SCIF0);
-	r7s72100_register_scif(SCIF1);
-	r7s72100_register_scif(SCIF2);
-	r7s72100_register_scif(SCIF3);
-	r7s72100_register_scif(SCIF4);
-	r7s72100_register_scif(SCIF5);
-	r7s72100_register_scif(SCIF6);
-	r7s72100_register_scif(SCIF7);
+	r7s72100_register_scif(0);
+	r7s72100_register_scif(1);
+	r7s72100_register_scif(2);
+	r7s72100_register_scif(3);
+	r7s72100_register_scif(4);
+	r7s72100_register_scif(5);
+	r7s72100_register_scif(6);
+	r7s72100_register_scif(7);
 	r7s72100_register_mtu2(0);
 }
 
-- 
1.8.3.2

[PATCH v3 13/29] ARM: shmobile: r8a73a4: Don't define SCIF platform data in an array

[Laurent Pinchart]

The SCIF driver is transitioning to platform resources. Board code will
thus need to define an array of resources for each SCIF device. This is
incompatible with the macro-based SCIF platform data definition as an
array. Rework the macro to define platform data as individual
structures.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 arch/arm/mach-shmobile/setup-r8a73a4.c | 58 +++++++++++++++-------------------
 1 file changed, 26 insertions(+), 32 deletions(-)

diff --git a/arch/arm/mach-shmobile/setup-r8a73a4.c b/arch/arm/mach-shmobile/setup-r8a73a4.c
index cc94b64..605298b 100644
--- a/arch/arm/mach-shmobile/setup-r8a73a4.c
+++ b/arch/arm/mach-shmobile/setup-r8a73a4.c
@@ -40,41 +40,35 @@ void __init r8a73a4_pinmux_init(void)
 					ARRAY_SIZE(pfc_resources));
 }
 
-#define SCIF_COMMON(scif_type, baseaddr, irq)			\
+#define R8A73A4_SCIF(scif_type, _scscr, index, baseaddr, irq)	\
+static struct plat_sci_port scif##index##_platform_data = {	\
 	.type		= scif_type,				\
 	.mapbase	= baseaddr,				\
 	.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,	\
 	.scbrr_algo_id	= SCBRR_ALGO_4,				\
-	.irqs		= SCIx_IRQ_MUXED(irq)
-
-#define SCIFA_DATA(index, baseaddr, irq)		\
-[index] = {						\
-	SCIF_COMMON(PORT_SCIFA, baseaddr, irq),		\
-	.scscr = SCSCR_RE | SCSCR_TE | SCSCR_CKE0,	\
+	.scscr		= _scscr,				\
+	.irqs		= SCIx_IRQ_MUXED(irq),			\
 }
 
-#define SCIFB_DATA(index, baseaddr, irq)	\
-[index] = {					\
-	SCIF_COMMON(PORT_SCIFB, baseaddr, irq),	\
-	.scscr = SCSCR_RE | SCSCR_TE,		\
-}
+#define R8A73A4_SCIFA(index, baseaddr, irq)	\
+	R8A73A4_SCIF(PORT_SCIFA, SCSCR_RE | SCSCR_TE | SCSCR_CKE0, \
+		     index, baseaddr, irq)
 
-enum { SCIFA0, SCIFA1, SCIFB0, SCIFB1, SCIFB2, SCIFB3 };
+#define R8A73A4_SCIFB(index, baseaddr, irq)	\
+	R8A73A4_SCIF(PORT_SCIFB, SCSCR_RE | SCSCR_TE, \
+		     index, baseaddr, irq)
 
-static const struct plat_sci_port scif[] = {
-	SCIFA_DATA(SCIFA0, 0xe6c40000, gic_spi(144)), /* SCIFA0 */
-	SCIFA_DATA(SCIFA1, 0xe6c50000, gic_spi(145)), /* SCIFA1 */
-	SCIFB_DATA(SCIFB0, 0xe6c20000, gic_spi(148)), /* SCIFB0 */
-	SCIFB_DATA(SCIFB1, 0xe6c30000, gic_spi(149)), /* SCIFB1 */
-	SCIFB_DATA(SCIFB2, 0xe6ce0000, gic_spi(150)), /* SCIFB2 */
-	SCIFB_DATA(SCIFB3, 0xe6cf0000, gic_spi(151)), /* SCIFB3 */
-};
+R8A73A4_SCIFA(0, 0xe6c40000, gic_spi(144)); /* SCIFA0 */
+R8A73A4_SCIFA(1, 0xe6c50000, gic_spi(145)); /* SCIFA1 */
+R8A73A4_SCIFB(2, 0xe6c20000, gic_spi(148)); /* SCIFB0 */
+R8A73A4_SCIFB(3, 0xe6c30000, gic_spi(149)); /* SCIFB1 */
+R8A73A4_SCIFB(4, 0xe6ce0000, gic_spi(150)); /* SCIFB2 */
+R8A73A4_SCIFB(5, 0xe6cf0000, gic_spi(151)); /* SCIFB3 */
 
-static inline void r8a73a4_register_scif(int idx)
-{
-	platform_device_register_data(&platform_bus, "sh-sci", idx, &scif[idx],
-				      sizeof(struct plat_sci_port));
-}
+#define r8a73a4_register_scif(index)					       \
+	platform_device_register_data(&platform_bus, "sh-sci", index,	       \
+				      &scif##index##_platform_data,	       \
+				      sizeof(scif##index##_platform_data))
 
 static const struct renesas_irqc_config irqc0_data = {
 	.irq_base = irq_pin(0), /* IRQ0 -> IRQ31 */
@@ -192,12 +186,12 @@ static struct resource cmt10_resources[] = {
 
 void __init r8a73a4_add_dt_devices(void)
 {
-	r8a73a4_register_scif(SCIFA0);
-	r8a73a4_register_scif(SCIFA1);
-	r8a73a4_register_scif(SCIFB0);
-	r8a73a4_register_scif(SCIFB1);
-	r8a73a4_register_scif(SCIFB2);
-	r8a73a4_register_scif(SCIFB3);
+	r8a73a4_register_scif(0);
+	r8a73a4_register_scif(1);
+	r8a73a4_register_scif(2);
+	r8a73a4_register_scif(3);
+	r8a73a4_register_scif(4);
+	r8a73a4_register_scif(5);
 	r8a7790_register_cmt(10);
 }
 
-- 
1.8.3.2

[PATCH v3 14/29] ARM: shmobile: r8a7778: Don't define SCIF platform data in an array

[Laurent Pinchart]

The SCIF driver is transitioning to platform resources. Board code will
thus need to define an array of resources for each SCIF device. This is
incompatible with the macro-based SCIF platform data definition as an
array. Rework the macro to define platform data as individual
structures.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 arch/arm/mach-shmobile/setup-r8a7778.c | 36 ++++++++++++++++++----------------
 1 file changed, 19 insertions(+), 17 deletions(-)

diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c
index 03fcc59..37ce2df 100644
--- a/arch/arm/mach-shmobile/setup-r8a7778.c
+++ b/arch/arm/mach-shmobile/setup-r8a7778.c
@@ -44,8 +44,8 @@
 #include <asm/hardware/cache-l2x0.h>
 
 /* SCIF */
-#define SCIF_INFO(baseaddr, irq)				\
-{								\
+#define R8A7778_SCIF(index, baseaddr, irq)			\
+static struct plat_sci_port scif##index##_platform_data = {	\
 	.mapbase	= baseaddr,				\
 	.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,	\
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_CKE1,	\
@@ -54,14 +54,17 @@
 	.irqs		= SCIx_IRQ_MUXED(irq),			\
 }
 
-static struct plat_sci_port scif_platform_data[] __initdata = {
-	SCIF_INFO(0xffe40000, gic_iid(0x66)),
-	SCIF_INFO(0xffe41000, gic_iid(0x67)),
-	SCIF_INFO(0xffe42000, gic_iid(0x68)),
-	SCIF_INFO(0xffe43000, gic_iid(0x69)),
-	SCIF_INFO(0xffe44000, gic_iid(0x6a)),
-	SCIF_INFO(0xffe45000, gic_iid(0x6b)),
-};
+R8A7778_SCIF(0, 0xffe40000, gic_iid(0x66));
+R8A7778_SCIF(1, 0xffe41000, gic_iid(0x67));
+R8A7778_SCIF(2, 0xffe42000, gic_iid(0x68));
+R8A7778_SCIF(3, 0xffe43000, gic_iid(0x69));
+R8A7778_SCIF(4, 0xffe44000, gic_iid(0x6a));
+R8A7778_SCIF(5, 0xffe45000, gic_iid(0x6b));
+
+#define r8a7778_register_scif(index)					       \
+	platform_device_register_data(&platform_bus, "sh-sci", index,	       \
+				      &scif##index##_platform_data,	       \
+				      sizeof(scif##index##_platform_data))
 
 /* TMU */
 static struct resource sh_tmu0_resources[] __initdata = {
@@ -287,8 +290,6 @@ static void __init r8a7778_register_hspi(int id)
 
 void __init r8a7778_add_dt_devices(void)
 {
-	int i;
-
 #ifdef CONFIG_CACHE_L2X0
 	void __iomem *base = ioremap_nocache(0xf0100000, 0x1000);
 	if (base) {
@@ -300,11 +301,12 @@ void __init r8a7778_add_dt_devices(void)
 	}
 #endif
 
-	for (i = 0; i < ARRAY_SIZE(scif_platform_data); i++)
-		platform_device_register_data(&platform_bus, "sh-sci", i,
-					      &scif_platform_data[i],
-					      sizeof(struct plat_sci_port));
-
+	r8a7778_register_scif(0);
+	r8a7778_register_scif(1);
+	r8a7778_register_scif(2);
+	r8a7778_register_scif(3);
+	r8a7778_register_scif(4);
+	r8a7778_register_scif(5);
 	r8a7778_register_tmu(0);
 	r8a7778_register_tmu(1);
 }
-- 
1.8.3.2

[PATCH v3 15/29] ARM: shmobile: r8a7790: Don't define SCIF platform data in an array

[Laurent Pinchart]

The SCIF driver is transitioning to platform resources. Board code will
thus need to define an array of resources for each SCIF device. This is
incompatible with the macro-based SCIF platform data definition as an
array. Rework the macro to define platform data as individual
structures.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 arch/arm/mach-shmobile/setup-r8a7790.c | 112 +++++++++++++++------------------
 1 file changed, 49 insertions(+), 63 deletions(-)

diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c
index 3543c3b..8344743 100644
--- a/arch/arm/mach-shmobile/setup-r8a7790.c
+++ b/arch/arm/mach-shmobile/setup-r8a7790.c
@@ -78,61 +78,47 @@ void __init r8a7790_pinmux_init(void)
 	r8a7790_register_gpio(5);
 }
 
-#define SCIF_COMMON(scif_type, baseaddr, irq)			\
-	.type		= scif_type,				\
-	.mapbase	= baseaddr,				\
-	.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,	\
-	.irqs		= SCIx_IRQ_MUXED(irq)
-
-#define SCIFA_DATA(index, baseaddr, irq)		\
-[index] = {						\
-	SCIF_COMMON(PORT_SCIFA, baseaddr, irq),		\
-	.scbrr_algo_id	= SCBRR_ALGO_4,			\
-	.scscr = SCSCR_RE | SCSCR_TE | SCSCR_CKE0,	\
+#define __R8A7790_SCIF(scif_type, _scscr, algo, index, baseaddr, irq)	\
+static struct plat_sci_port scif##index##_platform_data = {		\
+	.type		= scif_type,					\
+	.mapbase	= baseaddr,					\
+	.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,		\
+	.scbrr_algo_id	= algo,						\
+	.scscr		= _scscr,					\
+	.irqs		= SCIx_IRQ_MUXED(irq),				\
 }
 
-#define SCIFB_DATA(index, baseaddr, irq)	\
-[index] = {					\
-	SCIF_COMMON(PORT_SCIFB, baseaddr, irq),	\
-	.scbrr_algo_id	= SCBRR_ALGO_4,		\
-	.scscr = SCSCR_RE | SCSCR_TE,		\
-}
-
-#define SCIF_DATA(index, baseaddr, irq)		\
-[index] = {						\
-	SCIF_COMMON(PORT_SCIF, baseaddr, irq),		\
-	.scbrr_algo_id	= SCBRR_ALGO_2,			\
-	.scscr = SCSCR_RE | SCSCR_TE,	\
-}
-
-#define HSCIF_DATA(index, baseaddr, irq)		\
-[index] = {						\
-	SCIF_COMMON(PORT_HSCIF, baseaddr, irq),		\
-	.scbrr_algo_id	= SCBRR_ALGO_6,			\
-	.scscr = SCSCR_RE | SCSCR_TE,	\
-}
-
-enum { SCIFA0, SCIFA1, SCIFB0, SCIFB1, SCIFB2, SCIFA2, SCIF0, SCIF1,
-       HSCIF0, HSCIF1 };
-
-static const struct plat_sci_port scif[] __initconst = {
-	SCIFA_DATA(SCIFA0, 0xe6c40000, gic_spi(144)), /* SCIFA0 */
-	SCIFA_DATA(SCIFA1, 0xe6c50000, gic_spi(145)), /* SCIFA1 */
-	SCIFB_DATA(SCIFB0, 0xe6c20000, gic_spi(148)), /* SCIFB0 */
-	SCIFB_DATA(SCIFB1, 0xe6c30000, gic_spi(149)), /* SCIFB1 */
-	SCIFB_DATA(SCIFB2, 0xe6ce0000, gic_spi(150)), /* SCIFB2 */
-	SCIFA_DATA(SCIFA2, 0xe6c60000, gic_spi(151)), /* SCIFA2 */
-	SCIF_DATA(SCIF0, 0xe6e60000, gic_spi(152)), /* SCIF0 */
-	SCIF_DATA(SCIF1, 0xe6e68000, gic_spi(153)), /* SCIF1 */
-	HSCIF_DATA(HSCIF0, 0xe62c0000, gic_spi(154)), /* HSCIF0 */
-	HSCIF_DATA(HSCIF1, 0xe62c8000, gic_spi(155)), /* HSCIF1 */
-};
-
-static inline void r8a7790_register_scif(int idx)
-{
-	platform_device_register_data(&platform_bus, "sh-sci", idx, &scif[idx],
-				      sizeof(struct plat_sci_port));
-}
+#define R8A7790_SCIF(index, baseaddr, irq)				\
+	__R8A7790_SCIF(PORT_SCIF, SCSCR_RE | SCSCR_TE,			\
+		       SCBRR_ALGO_2, index, baseaddr, irq)
+
+#define R8A7790_SCIFA(index, baseaddr, irq)				\
+	__R8A7790_SCIF(PORT_SCIFA, SCSCR_RE | SCSCR_TE | SCSCR_CKE0,	\
+		       SCBRR_ALGO_4, index, baseaddr, irq)
+
+#define R8A7790_SCIFB(index, baseaddr, irq)				\
+	__R8A7790_SCIF(PORT_SCIFB, SCSCR_RE | SCSCR_TE,			\
+		       SCBRR_ALGO_4, index, baseaddr, irq)
+
+#define R8A7790_HSCIF(index, baseaddr, irq)				\
+	__R8A7790_SCIF(PORT_HSCIF, SCSCR_RE | SCSCR_TE,			\
+		       SCBRR_ALGO_6, index, baseaddr, irq)
+
+R8A7790_SCIFA(0, 0xe6c40000, gic_spi(144)); /* SCIFA0 */
+R8A7790_SCIFA(1, 0xe6c50000, gic_spi(145)); /* SCIFA1 */
+R8A7790_SCIFB(2, 0xe6c20000, gic_spi(148)); /* SCIFB0 */
+R8A7790_SCIFB(3, 0xe6c30000, gic_spi(149)); /* SCIFB1 */
+R8A7790_SCIFB(4, 0xe6ce0000, gic_spi(150)); /* SCIFB2 */
+R8A7790_SCIFA(5, 0xe6c60000, gic_spi(151)); /* SCIFA2 */
+R8A7790_SCIF(6,  0xe6e60000, gic_spi(152)); /* SCIF0 */
+R8A7790_SCIF(7,  0xe6e68000, gic_spi(153)); /* SCIF1 */
+R8A7790_HSCIF(8, 0xe62c0000, gic_spi(154)); /* HSCIF0 */
+R8A7790_HSCIF(9, 0xe62c8000, gic_spi(155)); /* HSCIF1 */
+
+#define r8a7790_register_scif(index)					       \
+	platform_device_register_data(&platform_bus, "sh-sci", index,	       \
+				      &scif##index##_platform_data,	       \
+				      sizeof(scif##index##_platform_data))
 
 static const struct renesas_irqc_config irqc0_data __initconst = {
 	.irq_base = irq_pin(0), /* IRQ0 -> IRQ3 */
@@ -185,16 +171,16 @@ static const struct resource cmt00_resources[] __initconst = {
 
 void __init r8a7790_add_dt_devices(void)
 {
-	r8a7790_register_scif(SCIFA0);
-	r8a7790_register_scif(SCIFA1);
-	r8a7790_register_scif(SCIFB0);
-	r8a7790_register_scif(SCIFB1);
-	r8a7790_register_scif(SCIFB2);
-	r8a7790_register_scif(SCIFA2);
-	r8a7790_register_scif(SCIF0);
-	r8a7790_register_scif(SCIF1);
-	r8a7790_register_scif(HSCIF0);
-	r8a7790_register_scif(HSCIF1);
+	r8a7790_register_scif(0);
+	r8a7790_register_scif(1);
+	r8a7790_register_scif(2);
+	r8a7790_register_scif(3);
+	r8a7790_register_scif(4);
+	r8a7790_register_scif(5);
+	r8a7790_register_scif(6);
+	r8a7790_register_scif(7);
+	r8a7790_register_scif(8);
+	r8a7790_register_scif(9);
 	r8a7790_register_cmt(00);
 }
 
-- 
1.8.3.2

[PATCH v3 16/29] ARM: shmobile: r8a7791: Don't define SCIF platform data in an array

[Laurent Pinchart]

The SCIF driver is transitioning to platform resources. Board code will
thus need to define an array of resources for each SCIF device. This is
incompatible with the macro-based SCIF platform data definition as an
array. Rework the macro to define platform data as individual
structures.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 arch/arm/mach-shmobile/setup-r8a7791.c | 125 ++++++++++++++-------------------
 1 file changed, 52 insertions(+), 73 deletions(-)

diff --git a/arch/arm/mach-shmobile/setup-r8a7791.c b/arch/arm/mach-shmobile/setup-r8a7791.c
index 59dd442..8eb9373 100644
--- a/arch/arm/mach-shmobile/setup-r8a7791.c
+++ b/arch/arm/mach-shmobile/setup-r8a7791.c
@@ -84,66 +84,45 @@ void __init r8a7791_pinmux_init(void)
 	r8a7791_register_gpio(7);
 }
 
-#define SCIF_COMMON(scif_type, baseaddr, irq)			\
-	.type		= scif_type,				\
-	.mapbase	= baseaddr,				\
-	.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,	\
-	.irqs		= SCIx_IRQ_MUXED(irq)
-
-#define SCIFA_DATA(index, baseaddr, irq)		\
-[index] = {						\
-	SCIF_COMMON(PORT_SCIFA, baseaddr, irq),		\
-	.scbrr_algo_id	= SCBRR_ALGO_4,			\
-	.scscr = SCSCR_RE | SCSCR_TE,	\
+#define __R8A7791_SCIF(scif_type, algo, index, baseaddr, irq)		\
+static struct plat_sci_port scif##index##_platform_data = {		\
+	.type		= scif_type,					\
+	.mapbase	= baseaddr,					\
+	.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,		\
+	.scbrr_algo_id	= algo,						\
+	.scscr		= SCSCR_RE | SCSCR_TE,				\
+	.irqs		= SCIx_IRQ_MUXED(irq),				\
 }
 
-#define SCIFB_DATA(index, baseaddr, irq)	\
-[index] = {					\
-	SCIF_COMMON(PORT_SCIFB, baseaddr, irq),	\
-	.scbrr_algo_id	= SCBRR_ALGO_4,		\
-	.scscr = SCSCR_RE | SCSCR_TE,		\
-}
-
-#define SCIF_DATA(index, baseaddr, irq)		\
-[index] = {						\
-	SCIF_COMMON(PORT_SCIF, baseaddr, irq),		\
-	.scbrr_algo_id	= SCBRR_ALGO_2,			\
-	.scscr = SCSCR_RE | SCSCR_TE,	\
-}
-
-#define HSCIF_DATA(index, baseaddr, irq)		\
-[index] = {						\
-	SCIF_COMMON(PORT_HSCIF, baseaddr, irq),		\
-	.scbrr_algo_id	= SCBRR_ALGO_6,			\
-	.scscr = SCSCR_RE | SCSCR_TE,	\
-}
-
-enum { SCIFA0, SCIFA1, SCIFB0, SCIFB1, SCIFB2, SCIFA2, SCIF0, SCIF1,
-	SCIF2, SCIF3, SCIF4, SCIF5, SCIFA3, SCIFA4, SCIFA5 };
-
-static const struct plat_sci_port scif[] __initconst = {
-	SCIFA_DATA(SCIFA0, 0xe6c40000, gic_spi(144)), /* SCIFA0 */
-	SCIFA_DATA(SCIFA1, 0xe6c50000, gic_spi(145)), /* SCIFA1 */
-	SCIFB_DATA(SCIFB0, 0xe6c20000, gic_spi(148)), /* SCIFB0 */
-	SCIFB_DATA(SCIFB1, 0xe6c30000, gic_spi(149)), /* SCIFB1 */
-	SCIFB_DATA(SCIFB2, 0xe6ce0000, gic_spi(150)), /* SCIFB2 */
-	SCIFA_DATA(SCIFA2, 0xe6c60000, gic_spi(151)), /* SCIFA2 */
-	SCIF_DATA(SCIF0, 0xe6e60000, gic_spi(152)), /* SCIF0 */
-	SCIF_DATA(SCIF1, 0xe6e68000, gic_spi(153)), /* SCIF1 */
-	SCIF_DATA(SCIF2, 0xe6e58000, gic_spi(22)), /* SCIF2 */
-	SCIF_DATA(SCIF3, 0xe6ea8000, gic_spi(23)), /* SCIF3 */
-	SCIF_DATA(SCIF4, 0xe6ee0000, gic_spi(24)), /* SCIF4 */
-	SCIF_DATA(SCIF5, 0xe6ee8000, gic_spi(25)), /* SCIF5 */
-	SCIFA_DATA(SCIFA3, 0xe6c70000, gic_spi(29)), /* SCIFA3 */
-	SCIFA_DATA(SCIFA4, 0xe6c78000, gic_spi(30)), /* SCIFA4 */
-	SCIFA_DATA(SCIFA5, 0xe6c80000, gic_spi(31)), /* SCIFA5 */
-};
-
-static inline void r8a7791_register_scif(int idx)
-{
-	platform_device_register_data(&platform_bus, "sh-sci", idx, &scif[idx],
-				      sizeof(struct plat_sci_port));
-}
+#define R8A7791_SCIF(index, baseaddr, irq)				\
+	__R8A7791_SCIF(PORT_SCIF, SCBRR_ALGO_2, index, baseaddr, irq)
+
+#define R8A7791_SCIFA(index, baseaddr, irq)				\
+	__R8A7791_SCIF(PORT_SCIFA, SCBRR_ALGO_4, index, baseaddr, irq)
+
+#define R8A7791_SCIFB(index, baseaddr, irq)				\
+	__R8A7791_SCIF(PORT_SCIFB, SCBRR_ALGO_4, index, baseaddr, irq)
+
+R8A7791_SCIFA(0,  0xe6c40000, gic_spi(144)); /* SCIFA0 */
+R8A7791_SCIFA(1,  0xe6c50000, gic_spi(145)); /* SCIFA1 */
+R8A7791_SCIFB(2,  0xe6c20000, gic_spi(148)); /* SCIFB0 */
+R8A7791_SCIFB(3,  0xe6c30000, gic_spi(149)); /* SCIFB1 */
+R8A7791_SCIFB(4,  0xe6ce0000, gic_spi(150)); /* SCIFB2 */
+R8A7791_SCIFA(5,  0xe6c60000, gic_spi(151)); /* SCIFA2 */
+R8A7791_SCIF(6,   0xe6e60000, gic_spi(152)); /* SCIF0 */
+R8A7791_SCIF(7,   0xe6e68000, gic_spi(153)); /* SCIF1 */
+R8A7791_SCIF(8,   0xe6e58000, gic_spi(22)); /* SCIF2 */
+R8A7791_SCIF(9,   0xe6ea8000, gic_spi(23)); /* SCIF3 */
+R8A7791_SCIF(10,  0xe6ee0000, gic_spi(24)); /* SCIF4 */
+R8A7791_SCIF(11,  0xe6ee8000, gic_spi(25)); /* SCIF5 */
+R8A7791_SCIFA(12, 0xe6c70000, gic_spi(29)); /* SCIFA3 */
+R8A7791_SCIFA(13, 0xe6c78000, gic_spi(30)); /* SCIFA4 */
+R8A7791_SCIFA(14, 0xe6c80000, gic_spi(31)); /* SCIFA5 */
+
+#define r8a7791_register_scif(index)					       \
+	platform_device_register_data(&platform_bus, "sh-sci", index,	       \
+				      &scif##index##_platform_data,	       \
+				      sizeof(scif##index##_platform_data))
 
 static const struct sh_timer_config cmt00_platform_data __initconst = {
 	.name = "CMT00",
@@ -191,21 +170,21 @@ static struct resource irqc0_resources[] = {
 
 void __init r8a7791_add_dt_devices(void)
 {
-	r8a7791_register_scif(SCIFA0);
-	r8a7791_register_scif(SCIFA1);
-	r8a7791_register_scif(SCIFB0);
-	r8a7791_register_scif(SCIFB1);
-	r8a7791_register_scif(SCIFB2);
-	r8a7791_register_scif(SCIFA2);
-	r8a7791_register_scif(SCIF0);
-	r8a7791_register_scif(SCIF1);
-	r8a7791_register_scif(SCIF2);
-	r8a7791_register_scif(SCIF3);
-	r8a7791_register_scif(SCIF4);
-	r8a7791_register_scif(SCIF5);
-	r8a7791_register_scif(SCIFA3);
-	r8a7791_register_scif(SCIFA4);
-	r8a7791_register_scif(SCIFA5);
+	r8a7791_register_scif(0);
+	r8a7791_register_scif(1);
+	r8a7791_register_scif(2);
+	r8a7791_register_scif(3);
+	r8a7791_register_scif(4);
+	r8a7791_register_scif(5);
+	r8a7791_register_scif(6);
+	r8a7791_register_scif(7);
+	r8a7791_register_scif(8);
+	r8a7791_register_scif(9);
+	r8a7791_register_scif(10);
+	r8a7791_register_scif(11);
+	r8a7791_register_scif(12);
+	r8a7791_register_scif(13);
+	r8a7791_register_scif(14);
 	r8a7791_register_cmt(00);
 }
 
-- 
1.8.3.2

[PATCH v3 17/29] ARM: shmobile: sh7372: Declare SCIF register base and IRQ as resources

[Laurent Pinchart]

Passing the register base address and IRQ through platform data is
deprecated. Use resources instead.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 arch/arm/mach-shmobile/setup-sh7372.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c
index 77627dd..798f8ac 100644
--- a/arch/arm/mach-shmobile/setup-sh7372.c
+++ b/arch/arm/mach-shmobile/setup-sh7372.c
@@ -90,16 +90,21 @@ void __init sh7372_pinmux_init(void)
 #define SH7372_SCIF(scif_type, index, baseaddr, irq)		\
 static struct plat_sci_port scif##index##_platform_data = {	\
 	.type		= scif_type,				\
-	.mapbase	= baseaddr,				\
 	.flags		= UPF_BOOT_AUTOCONF,			\
-	.irqs		= SCIx_IRQ_MUXED(irq),			\
 	.scbrr_algo_id	= SCBRR_ALGO_4,				\
 	.scscr		= SCSCR_RE | SCSCR_TE,			\
 };								\
 								\
+static struct resource scif##index##_resources[] = {		\
+	DEFINE_RES_MEM(baseaddr, 0x100),			\
+	DEFINE_RES_IRQ(irq),					\
+};								\
+								\
 static struct platform_device scif##index##_device = {		\
 	.name		= "sh-sci",				\
 	.id		= index,				\
+	.resource	= scif##index##_resources,		\
+	.num_resources	= ARRAY_SIZE(scif##index##_resources),	\
 	.dev		= {					\
 		.platform_data	= &scif##index##_platform_data,	\
 	},							\
-- 
1.8.3.2

[PATCH v3 18/29] ARM: shmobile: sh73a0: Declare SCIF register base and IRQ as resources

[Laurent Pinchart]

Passing the register base address and IRQ through platform data is
deprecated. Use resources instead.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 arch/arm/mach-shmobile/setup-sh73a0.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c
index 9c94f34..55ed98f 100644
--- a/arch/arm/mach-shmobile/setup-sh73a0.c
+++ b/arch/arm/mach-shmobile/setup-sh73a0.c
@@ -75,16 +75,21 @@ void __init sh73a0_pinmux_init(void)
 #define SH73A0_SCIF(scif_type, index, baseaddr, irq)		\
 static struct plat_sci_port scif##index##_platform_data = {	\
 	.type		= scif_type,				\
-	.mapbase	= baseaddr,				\
 	.flags		= UPF_BOOT_AUTOCONF,			\
-	.irqs		= SCIx_IRQ_MUXED(irq),			\
 	.scbrr_algo_id	= SCBRR_ALGO_4,				\
 	.scscr		= SCSCR_RE | SCSCR_TE,			\
 };								\
 								\
+static struct resource scif##index##_resources[] = {		\
+	DEFINE_RES_MEM(baseaddr, 0x100),			\
+	DEFINE_RES_IRQ(irq),					\
+};								\
+								\
 static struct platform_device scif##index##_device = {		\
 	.name		= "sh-sci",				\
 	.id		= index,				\
+	.resource	= scif##index##_resources,		\
+	.num_resources	= ARRAY_SIZE(scif##index##_resources),	\
 	.dev		= {					\
 		.platform_data	= &scif##index##_platform_data,	\
 	},							\
-- 
1.8.3.2

[PATCH v3 19/29] ARM: shmobile: r7s72100: Declare SCIF register base and IRQ as resources

[Laurent Pinchart]

Passing the register base address and IRQ through platform data is
deprecated. Use resources instead.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 arch/arm/mach-shmobile/setup-r7s72100.c | 20 ++++++++++++++------
 1 file changed, 14 insertions(+), 6 deletions(-)

diff --git a/arch/arm/mach-shmobile/setup-r7s72100.c b/arch/arm/mach-shmobile/setup-r7s72100.c
index 6ae7e32..81b995b 100644
--- a/arch/arm/mach-shmobile/setup-r7s72100.c
+++ b/arch/arm/mach-shmobile/setup-r7s72100.c
@@ -36,9 +36,15 @@ static const struct plat_sci_port scif##index##_platform_data = {	\
 	.scbrr_algo_id	= SCBRR_ALGO_2,					\
 	.scscr		= SCSCR_RIE | SCSCR_TIE | SCSCR_RE | SCSCR_TE |	\
 			  SCSCR_REIE,					\
-	.mapbase	= baseaddr,					\
-	.irqs		= { irq + 1, irq + 2, irq + 3, irq },		\
-}
+};									\
+									\
+static struct resource scif##index##_resources[] = {			\
+	DEFINE_RES_MEM(baseaddr, 0x100),				\
+	DEFINE_RES_IRQ(irq + 1),					\
+	DEFINE_RES_IRQ(irq + 2),					\
+	DEFINE_RES_IRQ(irq + 3),					\
+	DEFINE_RES_IRQ(irq),						\
+}									\
 
 R7S72100_SCIF(0, 0xe8007000, gic_iid(221));
 R7S72100_SCIF(1, 0xe8007800, gic_iid(225));
@@ -50,9 +56,11 @@ R7S72100_SCIF(6, 0xe800a000, gic_iid(245));
 R7S72100_SCIF(7, 0xe800a800, gic_iid(249));
 
 #define r7s72100_register_scif(index)					       \
-	platform_device_register_data(&platform_bus, "sh-sci", index,	       \
-				      &scif##index##_platform_data,	       \
-				      sizeof(scif##index##_platform_data))
+	platform_device_register_resndata(&platform_bus, "sh-sci", index,      \
+					  scif##index##_resources,	       \
+					  ARRAY_SIZE(scif##index##_resources), \
+					  &scif##index##_platform_data,	       \
+					  sizeof(scif##index##_platform_data))
 
 
 static struct sh_timer_config mtu2_0_platform_data __initdata = {
-- 
1.8.3.2

[PATCH v3 20/29] ARM: shmobile: r8a73a4: Declare SCIF register base and IRQ as resources

[Laurent Pinchart]

Passing the register base address and IRQ through platform data is
deprecated. Use resources instead.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 arch/arm/mach-shmobile/setup-r8a73a4.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/arch/arm/mach-shmobile/setup-r8a73a4.c b/arch/arm/mach-shmobile/setup-r8a73a4.c
index 605298b..ef32ce2 100644
--- a/arch/arm/mach-shmobile/setup-r8a73a4.c
+++ b/arch/arm/mach-shmobile/setup-r8a73a4.c
@@ -43,11 +43,14 @@ void __init r8a73a4_pinmux_init(void)
 #define R8A73A4_SCIF(scif_type, _scscr, index, baseaddr, irq)	\
 static struct plat_sci_port scif##index##_platform_data = {	\
 	.type		= scif_type,				\
-	.mapbase	= baseaddr,				\
 	.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,	\
 	.scbrr_algo_id	= SCBRR_ALGO_4,				\
 	.scscr		= _scscr,				\
-	.irqs		= SCIx_IRQ_MUXED(irq),			\
+};								\
+								\
+static struct resource scif##index##_resources[] = {		\
+	DEFINE_RES_MEM(baseaddr, 0x100),			\
+	DEFINE_RES_IRQ(irq),					\
 }
 
 #define R8A73A4_SCIFA(index, baseaddr, irq)	\
@@ -66,9 +69,11 @@ R8A73A4_SCIFB(4, 0xe6ce0000, gic_spi(150)); /* SCIFB2 */
 R8A73A4_SCIFB(5, 0xe6cf0000, gic_spi(151)); /* SCIFB3 */
 
 #define r8a73a4_register_scif(index)					       \
-	platform_device_register_data(&platform_bus, "sh-sci", index,	       \
-				      &scif##index##_platform_data,	       \
-				      sizeof(scif##index##_platform_data))
+	platform_device_register_resndata(&platform_bus, "sh-sci", index,      \
+					  scif##index##_resources,	       \
+					  ARRAY_SIZE(scif##index##_resources), \
+					  &scif##index##_platform_data,	       \
+					  sizeof(scif##index##_platform_data))
 
 static const struct renesas_irqc_config irqc0_data = {
 	.irq_base = irq_pin(0), /* IRQ0 -> IRQ31 */
-- 
1.8.3.2

[PATCH v3 21/29] ARM: shmobile: r8a7740: Declare SCIF register base and IRQ as resources

[Laurent Pinchart]

Passing the register base address and IRQ through platform data is
deprecated. Use resources instead.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 arch/arm/mach-shmobile/setup-r8a7740.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c
index 8778b57..81a4366 100644
--- a/arch/arm/mach-shmobile/setup-r8a7740.c
+++ b/arch/arm/mach-shmobile/setup-r8a7740.c
@@ -207,16 +207,21 @@ static struct platform_device irqpin3_device = {
 #define R8A7740_SCIF(scif_type, index, baseaddr, irq)		\
 static struct plat_sci_port scif##index##_platform_data = {	\
 	.type		= scif_type,				\
-	.mapbase	= baseaddr,				\
 	.flags		= UPF_BOOT_AUTOCONF,			\
-	.irqs		= SCIx_IRQ_MUXED(irq),			\
 	.scbrr_algo_id	= SCBRR_ALGO_4,				\
 	.scscr		= SCSCR_RE | SCSCR_TE,			\
 };								\
 								\
+static struct resource scif##index##_resources[] = {		\
+	DEFINE_RES_MEM(baseaddr, 0x100),			\
+	DEFINE_RES_IRQ(irq),					\
+};								\
+								\
 static struct platform_device scif##index##_device = {		\
 	.name		= "sh-sci",				\
 	.id		= index,				\
+	.resource	= scif##index##_resources,		\
+	.num_resources	= ARRAY_SIZE(scif##index##_resources),	\
 	.dev		= {					\
 		.platform_data	= &scif##index##_platform_data,	\
 	},							\
-- 
1.8.3.2

[PATCH v3 22/29] ARM: shmobile: r8a7778: Declare SCIF register base and IRQ as resources

[Laurent Pinchart]

Passing the register base address and IRQ through platform data is
deprecated. Use resources instead.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 arch/arm/mach-shmobile/setup-r8a7778.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c
index 37ce2df..d492c2c 100644
--- a/arch/arm/mach-shmobile/setup-r8a7778.c
+++ b/arch/arm/mach-shmobile/setup-r8a7778.c
@@ -46,12 +46,15 @@
 /* SCIF */
 #define R8A7778_SCIF(index, baseaddr, irq)			\
 static struct plat_sci_port scif##index##_platform_data = {	\
-	.mapbase	= baseaddr,				\
 	.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,	\
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_CKE1,	\
 	.scbrr_algo_id	= SCBRR_ALGO_2,				\
 	.type		= PORT_SCIF,				\
-	.irqs		= SCIx_IRQ_MUXED(irq),			\
+};								\
+								\
+static struct resource scif##index##_resources[] = {		\
+	DEFINE_RES_MEM(baseaddr, 0x100),			\
+	DEFINE_RES_IRQ(irq),					\
 }
 
 R8A7778_SCIF(0, 0xffe40000, gic_iid(0x66));
@@ -62,9 +65,11 @@ R8A7778_SCIF(4, 0xffe44000, gic_iid(0x6a));
 R8A7778_SCIF(5, 0xffe45000, gic_iid(0x6b));
 
 #define r8a7778_register_scif(index)					       \
-	platform_device_register_data(&platform_bus, "sh-sci", index,	       \
-				      &scif##index##_platform_data,	       \
-				      sizeof(scif##index##_platform_data))
+	platform_device_register_resndata(&platform_bus, "sh-sci", index,      \
+					  scif##index##_resources,	       \
+					  ARRAY_SIZE(scif##index##_resources), \
+					  &scif##index##_platform_data,	       \
+					  sizeof(scif##index##_platform_data))
 
 /* TMU */
 static struct resource sh_tmu0_resources[] __initdata = {
-- 
1.8.3.2

[PATCH v3 23/29] ARM: shmobile: r8a7779: Declare SCIF register base and IRQ as resources

[Laurent Pinchart]

Passing the register base address and IRQ through platform data is
deprecated. Use resources instead.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 arch/arm/mach-shmobile/setup-r8a7779.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c
index df418f1..85371ee 100644
--- a/arch/arm/mach-shmobile/setup-r8a7779.c
+++ b/arch/arm/mach-shmobile/setup-r8a7779.c
@@ -192,16 +192,21 @@ void __init r8a7779_pinmux_init(void)
 #define R8A7779_SCIF(index, baseaddr, irq)			\
 static struct plat_sci_port scif##index##_platform_data = {	\
 	.type		= PORT_SCIF,				\
-	.mapbase	= baseaddr,				\
 	.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,	\
-	.irqs		= SCIx_IRQ_MUXED(irq),			\
 	.scbrr_algo_id	= SCBRR_ALGO_2,				\
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_CKE1,	\
 };								\
 								\
+static struct resource scif##index##_resources[] = {		\
+	DEFINE_RES_MEM(baseaddr, 0x100),			\
+	DEFINE_RES_IRQ(irq),					\
+};								\
+								\
 static struct platform_device scif##index##_device = {		\
 	.name		= "sh-sci",				\
 	.id		= index,				\
+	.resource	= scif##index##_resources,		\
+	.num_resources	= ARRAY_SIZE(scif##index##_resources),	\
 	.dev		= {					\
 		.platform_data	= &scif##index##_platform_data,	\
 	},							\
-- 
1.8.3.2

[PATCH v3 24/29] ARM: shmobile: r8a7790: Declare SCIF register base and IRQ as resources

[Laurent Pinchart]

Passing the register base address and IRQ through platform data is
deprecated. Use resources instead.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 arch/arm/mach-shmobile/setup-r8a7790.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c
index 8344743..70bb553 100644
--- a/arch/arm/mach-shmobile/setup-r8a7790.c
+++ b/arch/arm/mach-shmobile/setup-r8a7790.c
@@ -81,11 +81,14 @@ void __init r8a7790_pinmux_init(void)
 #define __R8A7790_SCIF(scif_type, _scscr, algo, index, baseaddr, irq)	\
 static struct plat_sci_port scif##index##_platform_data = {		\
 	.type		= scif_type,					\
-	.mapbase	= baseaddr,					\
 	.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,		\
 	.scbrr_algo_id	= algo,						\
 	.scscr		= _scscr,					\
-	.irqs		= SCIx_IRQ_MUXED(irq),				\
+};									\
+									\
+static struct resource scif##index##_resources[] = {			\
+	DEFINE_RES_MEM(baseaddr, 0x100),				\
+	DEFINE_RES_IRQ(irq),						\
 }
 
 #define R8A7790_SCIF(index, baseaddr, irq)				\
@@ -116,9 +119,11 @@ R8A7790_HSCIF(8, 0xe62c0000, gic_spi(154)); /* HSCIF0 */
 R8A7790_HSCIF(9, 0xe62c8000, gic_spi(155)); /* HSCIF1 */
 
 #define r8a7790_register_scif(index)					       \
-	platform_device_register_data(&platform_bus, "sh-sci", index,	       \
-				      &scif##index##_platform_data,	       \
-				      sizeof(scif##index##_platform_data))
+	platform_device_register_resndata(&platform_bus, "sh-sci", index,      \
+					  scif##index##_resources,	       \
+					  ARRAY_SIZE(scif##index##_resources), \
+					  &scif##index##_platform_data,	       \
+					  sizeof(scif##index##_platform_data))
 
 static const struct renesas_irqc_config irqc0_data __initconst = {
 	.irq_base = irq_pin(0), /* IRQ0 -> IRQ3 */
-- 
1.8.3.2

[PATCH v3 25/29] ARM: shmobile: r8a7791: Declare SCIF register base and IRQ as resources

[Laurent Pinchart]

Passing the register base address and IRQ through platform data is
deprecated. Use resources instead.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 arch/arm/mach-shmobile/setup-r8a7791.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/arch/arm/mach-shmobile/setup-r8a7791.c b/arch/arm/mach-shmobile/setup-r8a7791.c
index 8eb9373..557db8f 100644
--- a/arch/arm/mach-shmobile/setup-r8a7791.c
+++ b/arch/arm/mach-shmobile/setup-r8a7791.c
@@ -87,11 +87,14 @@ void __init r8a7791_pinmux_init(void)
 #define __R8A7791_SCIF(scif_type, algo, index, baseaddr, irq)		\
 static struct plat_sci_port scif##index##_platform_data = {		\
 	.type		= scif_type,					\
-	.mapbase	= baseaddr,					\
 	.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,		\
 	.scbrr_algo_id	= algo,						\
 	.scscr		= SCSCR_RE | SCSCR_TE,				\
-	.irqs		= SCIx_IRQ_MUXED(irq),				\
+};									\
+									\
+static struct resource scif##index##_resources[] = {			\
+	DEFINE_RES_MEM(baseaddr, 0x100),				\
+	DEFINE_RES_IRQ(irq),						\
 }
 
 #define R8A7791_SCIF(index, baseaddr, irq)				\
@@ -120,9 +123,11 @@ R8A7791_SCIFA(13, 0xe6c78000, gic_spi(30)); /* SCIFA4 */
 R8A7791_SCIFA(14, 0xe6c80000, gic_spi(31)); /* SCIFA5 */
 
 #define r8a7791_register_scif(index)					       \
-	platform_device_register_data(&platform_bus, "sh-sci", index,	       \
-				      &scif##index##_platform_data,	       \
-				      sizeof(scif##index##_platform_data))
+	platform_device_register_resndata(&platform_bus, "sh-sci", index,      \
+					  scif##index##_resources,	       \
+					  ARRAY_SIZE(scif##index##_resources), \
+					  &scif##index##_platform_data,	       \
+					  sizeof(scif##index##_platform_data))
 
 static const struct sh_timer_config cmt00_platform_data __initconst = {
 	.name = "CMT00",
-- 
1.8.3.2

[PATCH v3 26/29] sh: Declare SCIF register base and IRQ as resources

[Laurent Pinchart]

Passing the register base address and IRQ through platform data is
deprecated. Use resources instead.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 arch/sh/kernel/cpu/sh2/setup-sh7619.c  | 27 +++++++---
 arch/sh/kernel/cpu/sh2a/setup-mxg.c    |  9 +++-
 arch/sh/kernel/cpu/sh2a/setup-sh7201.c | 72 +++++++++++++++++++------
 arch/sh/kernel/cpu/sh2a/setup-sh7203.c | 36 ++++++++++---
 arch/sh/kernel/cpu/sh2a/setup-sh7206.c | 36 ++++++++++---
 arch/sh/kernel/cpu/sh2a/setup-sh7264.c | 96 ++++++++++++++++++++++++++++------
 arch/sh/kernel/cpu/sh2a/setup-sh7269.c | 96 ++++++++++++++++++++++++++++------
 arch/sh/kernel/cpu/sh3/setup-sh7705.c  | 18 +++++--
 arch/sh/kernel/cpu/sh3/setup-sh770x.c  | 27 +++++++---
 arch/sh/kernel/cpu/sh3/setup-sh7710.c  | 18 +++++--
 arch/sh/kernel/cpu/sh3/setup-sh7720.c  | 18 +++++--
 arch/sh/kernel/cpu/sh4/setup-sh4-202.c | 15 ++++--
 arch/sh/kernel/cpu/sh4/setup-sh7750.c  | 18 +++++--
 arch/sh/kernel/cpu/sh4/setup-sh7760.c  | 58 +++++++++++++-------
 arch/sh/kernel/cpu/sh4a/setup-sh7343.c | 36 ++++++++++---
 arch/sh/kernel/cpu/sh4a/setup-sh7366.c |  9 +++-
 arch/sh/kernel/cpu/sh4a/setup-sh7722.c | 27 +++++++---
 arch/sh/kernel/cpu/sh4a/setup-sh7723.c | 54 ++++++++++++++-----
 arch/sh/kernel/cpu/sh4a/setup-sh7724.c | 54 ++++++++++++++-----
 arch/sh/kernel/cpu/sh4a/setup-sh7734.c | 66 ++++++++++++++++-------
 arch/sh/kernel/cpu/sh4a/setup-sh7757.c | 27 +++++++---
 arch/sh/kernel/cpu/sh4a/setup-sh7763.c | 27 +++++++---
 arch/sh/kernel/cpu/sh4a/setup-sh7770.c | 90 ++++++++++++++++++++++++-------
 arch/sh/kernel/cpu/sh4a/setup-sh7780.c | 18 +++++--
 arch/sh/kernel/cpu/sh4a/setup-sh7785.c | 54 ++++++++++++++-----
 arch/sh/kernel/cpu/sh4a/setup-sh7786.c | 82 ++++++++++++++++++++++-------
 arch/sh/kernel/cpu/sh4a/setup-shx3.c   | 45 ++++++++++------
 arch/sh/kernel/cpu/sh5/setup-sh5.c     | 11 +++-
 28 files changed, 883 insertions(+), 261 deletions(-)

diff --git a/arch/sh/kernel/cpu/sh2/setup-sh7619.c b/arch/sh/kernel/cpu/sh2/setup-sh7619.c
index 4df4d4f..1a4fe7c 100644
--- a/arch/sh/kernel/cpu/sh2/setup-sh7619.c
+++ b/arch/sh/kernel/cpu/sh2/setup-sh7619.c
@@ -61,51 +61,66 @@ static DECLARE_INTC_DESC(intc_desc, "sh7619", vectors, NULL,
 			 NULL, prio_registers, NULL);
 
 static struct plat_sci_port scif0_platform_data = {
-	.mapbase	= 0xf8400000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
-	.irqs		= SCIx_IRQ_MUXED(88),
+};
+
+static struct resource scif0_resources[] = {
+	DEFINE_RES_MEM(0xf8400000, 0x100),
+	DEFINE_RES_IRQ(88),
 };
 
 static struct platform_device scif0_device = {
 	.name		= "sh-sci",
 	.id		= 0,
+	.resource	= scif0_resources,
+	.num_resources	= ARRAY_SIZE(scif0_resources),
 	.dev		= {
 		.platform_data	= &scif0_platform_data,
 	},
 };
 
 static struct plat_sci_port scif1_platform_data = {
-	.mapbase	= 0xf8410000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
-	.irqs		= SCIx_IRQ_MUXED(92),
+};
+
+static struct resource scif1_resources[] = {
+	DEFINE_RES_MEM(0xf8410000, 0x100),
+	DEFINE_RES_IRQ(92),
 };
 
 static struct platform_device scif1_device = {
 	.name		= "sh-sci",
 	.id		= 1,
+	.resource	= scif1_resources,
+	.num_resources	= ARRAY_SIZE(scif1_resources),
 	.dev		= {
 		.platform_data	= &scif1_platform_data,
 	},
 };
 
 static struct plat_sci_port scif2_platform_data = {
-	.mapbase	= 0xf8420000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
-	.irqs		= SCIx_IRQ_MUXED(96),
+};
+
+static struct resource scif2_resources[] = {
+	DEFINE_RES_MEM(0xf8420000, 0x100),
+	DEFINE_RES_IRQ(96),
 };
 
 static struct platform_device scif2_device = {
 	.name		= "sh-sci",
 	.id		= 2,
+	.resource	= scif2_resources,
+	.num_resources	= ARRAY_SIZE(scif2_resources),
 	.dev		= {
 		.platform_data	= &scif2_platform_data,
 	},
diff --git a/arch/sh/kernel/cpu/sh2a/setup-mxg.c b/arch/sh/kernel/cpu/sh2a/setup-mxg.c
index f7f1cf2..9bdc611 100644
--- a/arch/sh/kernel/cpu/sh2a/setup-mxg.c
+++ b/arch/sh/kernel/cpu/sh2a/setup-mxg.c
@@ -199,17 +199,22 @@ static struct platform_device mtu2_2_device = {
 };
 
 static struct plat_sci_port scif0_platform_data = {
-	.mapbase	= 0xff804000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
-	.irqs		= SCIx_IRQ_MUXED(220),
+};
+
+static struct resource scif0_resources[] = {
+	DEFINE_RES_MEM(0xff804000, 0x100),
+	DEFINE_RES_IRQ(220),
 };
 
 static struct platform_device scif0_device = {
 	.name		= "sh-sci",
 	.id		= 0,
+	.resource	= scif0_resources,
+	.num_resources	= ARRAY_SIZE(scif0_resources),
 	.dev		= {
 		.platform_data	= &scif0_platform_data,
 	},
diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7201.c b/arch/sh/kernel/cpu/sh2a/setup-sh7201.c
index 7b84785..7585c4e 100644
--- a/arch/sh/kernel/cpu/sh2a/setup-sh7201.c
+++ b/arch/sh/kernel/cpu/sh2a/setup-sh7201.c
@@ -178,136 +178,176 @@ static DECLARE_INTC_DESC(intc_desc, "sh7201", vectors, groups,
 			 mask_registers, prio_registers, NULL);
 
 static struct plat_sci_port scif0_platform_data = {
-	.mapbase	= 0xfffe8000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
-	.irqs		= SCIx_IRQ_MUXED(180),
+};
+
+static struct resource scif0_resources[] = {
+	DEFINE_RES_MEM(0xfffe8000, 0x100),
+	DEFINE_RES_IRQ(180),
 };
 
 static struct platform_device scif0_device = {
 	.name		= "sh-sci",
 	.id		= 0,
+	.resource	= scif0_resources,
+	.num_resources	= ARRAY_SIZE(scif0_resources),
 	.dev		= {
 		.platform_data	= &scif0_platform_data,
 	},
 };
 
 static struct plat_sci_port scif1_platform_data = {
-	.mapbase	= 0xfffe8800,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
-	.irqs		= SCIx_IRQ_MUXED(184),
+};
+
+static struct resource scif1_resources[] = {
+	DEFINE_RES_MEM(0xfffe8800, 0x100),
+	DEFINE_RES_IRQ(184),
 };
 
 static struct platform_device scif1_device = {
 	.name		= "sh-sci",
 	.id		= 1,
+	.resource	= scif1_resources,
+	.num_resources	= ARRAY_SIZE(scif1_resources),
 	.dev		= {
 		.platform_data	= &scif1_platform_data,
 	},
 };
 
 static struct plat_sci_port scif2_platform_data = {
-	.mapbase	= 0xfffe9000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
-	.irqs		= SCIx_IRQ_MUXED(188),
+};
+
+static struct resource scif2_resources[] = {
+	DEFINE_RES_MEM(0xfffe9000, 0x100),
+	DEFINE_RES_IRQ(188),
 };
 
 static struct platform_device scif2_device = {
 	.name		= "sh-sci",
 	.id		= 2,
+	.resource	= scif2_resources,
+	.num_resources	= ARRAY_SIZE(scif2_resources),
 	.dev		= {
 		.platform_data	= &scif2_platform_data,
 	},
 };
 
 static struct plat_sci_port scif3_platform_data = {
-	.mapbase	= 0xfffe9800,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
-	.irqs		= SCIx_IRQ_MUXED(192),
+};
+
+static struct resource scif3_resources[] = {
+	DEFINE_RES_MEM(0xfffe9800, 0x100),
+	DEFINE_RES_IRQ(192),
 };
 
 static struct platform_device scif3_device = {
 	.name		= "sh-sci",
 	.id		= 3,
+	.resource	= scif3_resources,
+	.num_resources	= ARRAY_SIZE(scif3_resources),
 	.dev		= {
 		.platform_data	= &scif3_platform_data,
 	},
 };
 
 static struct plat_sci_port scif4_platform_data = {
-	.mapbase	= 0xfffea000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
-	.irqs		= SCIx_IRQ_MUXED(196),
+};
+
+static struct resource scif4_resources[] = {
+	DEFINE_RES_MEM(0xfffea000, 0x100),
+	DEFINE_RES_IRQ(196),
 };
 
 static struct platform_device scif4_device = {
 	.name		= "sh-sci",
 	.id		= 4,
+	.resource	= scif4_resources,
+	.num_resources	= ARRAY_SIZE(scif4_resources),
 	.dev		= {
 		.platform_data	= &scif4_platform_data,
 	},
 };
 
 static struct plat_sci_port scif5_platform_data = {
-	.mapbase	= 0xfffea800,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
-	.irqs		= SCIx_IRQ_MUXED(200),
+};
+
+static struct resource scif5_resources[] = {
+	DEFINE_RES_MEM(0xfffea800, 0x100),
+	DEFINE_RES_IRQ(200),
 };
 
 static struct platform_device scif5_device = {
 	.name		= "sh-sci",
 	.id		= 5,
+	.resource	= scif5_resources,
+	.num_resources	= ARRAY_SIZE(scif5_resources),
 	.dev		= {
 		.platform_data	= &scif5_platform_data,
 	},
 };
 
 static struct plat_sci_port scif6_platform_data = {
-	.mapbase	= 0xfffeb000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
-	.irqs		= SCIx_IRQ_MUXED(204),
+};
+
+static struct resource scif6_resources[] = {
+	DEFINE_RES_MEM(0xfffeb000, 0x100),
+	DEFINE_RES_IRQ(204),
 };
 
 static struct platform_device scif6_device = {
 	.name		= "sh-sci",
 	.id		= 6,
+	.resource	= scif6_resources,
+	.num_resources	= ARRAY_SIZE(scif6_resources),
 	.dev		= {
 		.platform_data	= &scif6_platform_data,
 	},
 };
 
 static struct plat_sci_port scif7_platform_data = {
-	.mapbase	= 0xfffeb800,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
-	.irqs		= SCIx_IRQ_MUXED(208),
+};
+
+static struct resource scif7_resources[] = {
+	DEFINE_RES_MEM(0xfffeb800, 0x100),
+	DEFINE_RES_IRQ(208),
 };
 
 static struct platform_device scif7_device = {
 	.name		= "sh-sci",
 	.id		= 7,
+	.resource	= scif7_resources,
+	.num_resources	= ARRAY_SIZE(scif7_resources),
 	.dev		= {
 		.platform_data	= &scif7_platform_data,
 	},
diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7203.c b/arch/sh/kernel/cpu/sh2a/setup-sh7203.c
index bfc33f6..f2a9baa 100644
--- a/arch/sh/kernel/cpu/sh2a/setup-sh7203.c
+++ b/arch/sh/kernel/cpu/sh2a/setup-sh7203.c
@@ -174,76 +174,96 @@ static DECLARE_INTC_DESC(intc_desc, "sh7203", vectors, groups,
 			 mask_registers, prio_registers, NULL);
 
 static struct plat_sci_port scif0_platform_data = {
-	.mapbase	= 0xfffe8000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RIE | SCSCR_TIE | SCSCR_RE | SCSCR_TE |
 			  SCSCR_REIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
-	.irqs		= SCIx_IRQ_MUXED(192),
 	.regtype	= SCIx_SH2_SCIF_FIFODATA_REGTYPE,
 };
 
+static struct resource scif0_resources[] = {
+	DEFINE_RES_MEM(0xfffe8000, 0x100),
+	DEFINE_RES_IRQ(192),
+};
+
 static struct platform_device scif0_device = {
 	.name		= "sh-sci",
 	.id		= 0,
+	.resource	= scif0_resources,
+	.num_resources	= ARRAY_SIZE(scif0_resources),
 	.dev		= {
 		.platform_data	= &scif0_platform_data,
 	},
 };
 
 static struct plat_sci_port scif1_platform_data = {
-	.mapbase	= 0xfffe8800,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RIE | SCSCR_TIE | SCSCR_RE | SCSCR_TE |
 			  SCSCR_REIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
-	.irqs		= SCIx_IRQ_MUXED(196),
 	.regtype	= SCIx_SH2_SCIF_FIFODATA_REGTYPE,
 };
 
+static struct resource scif1_resources[] = {
+	DEFINE_RES_MEM(0xfffe8800, 0x100),
+	DEFINE_RES_IRQ(196),
+};
+
 static struct platform_device scif1_device = {
 	.name		= "sh-sci",
 	.id		= 1,
+	.resource	= scif1_resources,
+	.num_resources	= ARRAY_SIZE(scif1_resources),
 	.dev		= {
 		.platform_data	= &scif1_platform_data,
 	},
 };
 
 static struct plat_sci_port scif2_platform_data = {
-	.mapbase	= 0xfffe9000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RIE | SCSCR_TIE | SCSCR_RE | SCSCR_TE |
 			  SCSCR_REIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
-	.irqs		= SCIx_IRQ_MUXED(200),
 	.regtype	= SCIx_SH2_SCIF_FIFODATA_REGTYPE,
 };
 
+static struct resource scif2_resources[] = {
+	DEFINE_RES_MEM(0xfffe9000, 0x100),
+	DEFINE_RES_IRQ(200),
+};
+
 static struct platform_device scif2_device = {
 	.name		= "sh-sci",
 	.id		= 2,
+	.resource	= scif2_resources,
+	.num_resources	= ARRAY_SIZE(scif2_resources),
 	.dev		= {
 		.platform_data	= &scif2_platform_data,
 	},
 };
 
 static struct plat_sci_port scif3_platform_data = {
-	.mapbase	= 0xfffe9800,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RIE | SCSCR_TIE | SCSCR_RE | SCSCR_TE |
 			  SCSCR_REIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
-	.irqs		= SCIx_IRQ_MUXED(204),
 	.regtype	= SCIx_SH2_SCIF_FIFODATA_REGTYPE,
 };
 
+static struct resource scif3_resources[] = {
+	DEFINE_RES_MEM(0xfffe9800, 0x100),
+	DEFINE_RES_IRQ(204),
+};
+
 static struct platform_device scif3_device = {
 	.name		= "sh-sci",
 	.id		= 3,
+	.resource	= scif3_resources,
+	.num_resources	= ARRAY_SIZE(scif3_resources),
 	.dev		= {
 		.platform_data	= &scif3_platform_data,
 	},
diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c
index a501074..fc7cacd 100644
--- a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c
+++ b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c
@@ -134,68 +134,88 @@ static DECLARE_INTC_DESC(intc_desc, "sh7206", vectors, groups,
 			 mask_registers, prio_registers, NULL);
 
 static struct plat_sci_port scif0_platform_data = {
-	.mapbase	= 0xfffe8000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
-	.irqs		= SCIx_IRQ_MUXED(240),
+};
+
+static struct resource scif0_resources[] = {
+	DEFINE_RES_MEM(0xfffe8000, 0x100),
+	DEFINE_RES_IRQ(240),
 };
 
 static struct platform_device scif0_device = {
 	.name		= "sh-sci",
 	.id		= 0,
+	.resource	= scif0_resources,
+	.num_resources	= ARRAY_SIZE(scif0_resources),
 	.dev		= {
 		.platform_data	= &scif0_platform_data,
 	},
 };
 
 static struct plat_sci_port scif1_platform_data = {
-	.mapbase	= 0xfffe8800,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
-	.irqs		= SCIx_IRQ_MUXED(244),
+};
+
+static struct resource scif1_resources[] = {
+	DEFINE_RES_MEM(0xfffe8800, 0x100),
+	DEFINE_RES_IRQ(244),
 };
 
 static struct platform_device scif1_device = {
 	.name		= "sh-sci",
 	.id		= 1,
+	.resource	= scif1_resources,
+	.num_resources	= ARRAY_SIZE(scif1_resources),
 	.dev		= {
 		.platform_data	= &scif1_platform_data,
 	},
 };
 
 static struct plat_sci_port scif2_platform_data = {
-	.mapbase	= 0xfffe9000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
-	.irqs		= SCIx_IRQ_MUXED(248),
+};
+
+static struct resource scif2_resources[] = {
+	DEFINE_RES_MEM(0xfffe9000, 0x100),
+	DEFINE_RES_IRQ(248),
 };
 
 static struct platform_device scif2_device = {
 	.name		= "sh-sci",
 	.id		= 2,
+	.resource	= scif2_resources,
+	.num_resources	= ARRAY_SIZE(scif2_resources),
 	.dev		= {
 		.platform_data	= &scif2_platform_data,
 	},
 };
 
 static struct plat_sci_port scif3_platform_data = {
-	.mapbase	= 0xfffe9800,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
-	.irqs		= SCIx_IRQ_MUXED(252),
+};
+
+static struct resource scif3_resources[] = {
+	DEFINE_RES_MEM(0xfffe9800, 0x100),
+	DEFINE_RES_IRQ(252),
 };
 
 static struct platform_device scif3_device = {
 	.name		= "sh-sci",
 	.id		= 3,
+	.resource	= scif3_resources,
+	.num_resources	= ARRAY_SIZE(scif3_resources),
 	.dev		= {
 		.platform_data	= &scif3_platform_data,
 	},
diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7264.c b/arch/sh/kernel/cpu/sh2a/setup-sh7264.c
index ce5c1b5..00edbda 100644
--- a/arch/sh/kernel/cpu/sh2a/setup-sh7264.c
+++ b/arch/sh/kernel/cpu/sh2a/setup-sh7264.c
@@ -226,152 +226,216 @@ static DECLARE_INTC_DESC(intc_desc, "sh7264", vectors, groups,
 			 mask_registers, prio_registers, NULL);
 
 static struct plat_sci_port scif0_platform_data = {
-	.mapbase	= 0xfffe8000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RIE | SCSCR_TIE | SCSCR_RE | SCSCR_TE |
 			  SCSCR_REIE | SCSCR_TOIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
-	.irqs		=  { 233, 234, 235, 232 },
 	.regtype	= SCIx_SH2_SCIF_FIFODATA_REGTYPE,
 };
 
+static struct resource scif0_resources[] = {
+	DEFINE_RES_MEM(0xfffe8000, 0x100),
+	DEFINE_RES_IRQ(233),
+	DEFINE_RES_IRQ(234),
+	DEFINE_RES_IRQ(235),
+	DEFINE_RES_IRQ(232),
+};
+
 static struct platform_device scif0_device = {
 	.name		= "sh-sci",
 	.id		= 0,
+	.resource	= scif0_resources,
+	.num_resources	= ARRAY_SIZE(scif0_resources),
 	.dev		= {
 		.platform_data	= &scif0_platform_data,
 	},
 };
 
 static struct plat_sci_port scif1_platform_data = {
-	.mapbase	= 0xfffe8800,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RIE | SCSCR_TIE | SCSCR_RE | SCSCR_TE |
 			  SCSCR_REIE | SCSCR_TOIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
-	.irqs		=  { 237, 238, 239, 236 },
 	.regtype	= SCIx_SH2_SCIF_FIFODATA_REGTYPE,
 };
 
+static struct resource scif1_resources[] = {
+	DEFINE_RES_MEM(0xfffe8800, 0x100),
+	DEFINE_RES_IRQ(237),
+	DEFINE_RES_IRQ(238),
+	DEFINE_RES_IRQ(239),
+	DEFINE_RES_IRQ(236),
+};
+
 static struct platform_device scif1_device = {
 	.name		= "sh-sci",
 	.id		= 1,
+	.resource	= scif1_resources,
+	.num_resources	= ARRAY_SIZE(scif1_resources),
 	.dev		= {
 		.platform_data	= &scif1_platform_data,
 	},
 };
 
 static struct plat_sci_port scif2_platform_data = {
-	.mapbase	= 0xfffe9000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RIE | SCSCR_TIE | SCSCR_RE | SCSCR_TE |
 			  SCSCR_REIE | SCSCR_TOIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
-	.irqs		=  { 241, 242, 243, 240 },
 	.regtype	= SCIx_SH2_SCIF_FIFODATA_REGTYPE,
 };
 
+static struct resource scif2_resources[] = {
+	DEFINE_RES_MEM(0xfffe9000, 0x100),
+	DEFINE_RES_IRQ(241),
+	DEFINE_RES_IRQ(242),
+	DEFINE_RES_IRQ(243),
+	DEFINE_RES_IRQ(240),
+};
+
 static struct platform_device scif2_device = {
 	.name		= "sh-sci",
 	.id		= 2,
+	.resource	= scif2_resources,
+	.num_resources	= ARRAY_SIZE(scif2_resources),
 	.dev		= {
 		.platform_data	= &scif2_platform_data,
 	},
 };
 
 static struct plat_sci_port scif3_platform_data = {
-	.mapbase	= 0xfffe9800,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RIE | SCSCR_TIE | SCSCR_RE | SCSCR_TE |
 			  SCSCR_REIE | SCSCR_TOIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
-	.irqs		=  { 245, 246, 247, 244 },
 	.regtype	= SCIx_SH2_SCIF_FIFODATA_REGTYPE,
 };
 
+static struct resource scif3_resources[] = {
+	DEFINE_RES_MEM(0xfffe9800, 0x100),
+	DEFINE_RES_IRQ(245),
+	DEFINE_RES_IRQ(246),
+	DEFINE_RES_IRQ(247),
+	DEFINE_RES_IRQ(244),
+};
+
 static struct platform_device scif3_device = {
 	.name		= "sh-sci",
 	.id		= 3,
+	.resource	= scif3_resources,
+	.num_resources	= ARRAY_SIZE(scif3_resources),
 	.dev		= {
 		.platform_data	= &scif3_platform_data,
 	},
 };
 
 static struct plat_sci_port scif4_platform_data = {
-	.mapbase	= 0xfffea000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RIE | SCSCR_TIE | SCSCR_RE | SCSCR_TE |
 			  SCSCR_REIE | SCSCR_TOIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
-	.irqs		=  { 249, 250, 251, 248 },
 	.regtype	= SCIx_SH2_SCIF_FIFODATA_REGTYPE,
 };
 
+static struct resource scif4_resources[] = {
+	DEFINE_RES_MEM(0xfffea000, 0x100),
+	DEFINE_RES_IRQ(249),
+	DEFINE_RES_IRQ(250),
+	DEFINE_RES_IRQ(251),
+	DEFINE_RES_IRQ(248),
+};
+
 static struct platform_device scif4_device = {
 	.name		= "sh-sci",
 	.id		= 4,
+	.resource	= scif4_resources,
+	.num_resources	= ARRAY_SIZE(scif4_resources),
 	.dev		= {
 		.platform_data	= &scif4_platform_data,
 	},
 };
 
 static struct plat_sci_port scif5_platform_data = {
-	.mapbase	= 0xfffea800,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RIE | SCSCR_TIE | SCSCR_RE | SCSCR_TE |
 			  SCSCR_REIE | SCSCR_TOIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
-	.irqs		=  { 253, 254, 255, 252 },
 	.regtype	= SCIx_SH2_SCIF_FIFODATA_REGTYPE,
 };
 
+static struct resource scif5_resources[] = {
+	DEFINE_RES_MEM(0xfffea800, 0x100),
+	DEFINE_RES_IRQ(253),
+	DEFINE_RES_IRQ(254),
+	DEFINE_RES_IRQ(255),
+	DEFINE_RES_IRQ(252),
+};
+
 static struct platform_device scif5_device = {
 	.name		= "sh-sci",
 	.id		= 5,
+	.resource	= scif5_resources,
+	.num_resources	= ARRAY_SIZE(scif5_resources),
 	.dev		= {
 		.platform_data	= &scif5_platform_data,
 	},
 };
 
 static struct plat_sci_port scif6_platform_data = {
-	.mapbase	= 0xfffeb000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RIE | SCSCR_TIE | SCSCR_RE | SCSCR_TE |
 			  SCSCR_REIE | SCSCR_TOIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
-	.irqs		=  { 257, 258, 259, 256 },
 	.regtype	= SCIx_SH2_SCIF_FIFODATA_REGTYPE,
 };
 
+static struct resource scif6_resources[] = {
+	DEFINE_RES_MEM(0xfffeb000, 0x100),
+	DEFINE_RES_IRQ(257),
+	DEFINE_RES_IRQ(258),
+	DEFINE_RES_IRQ(259),
+	DEFINE_RES_IRQ(256),
+};
+
 static struct platform_device scif6_device = {
 	.name		= "sh-sci",
 	.id		= 6,
+	.resource	= scif6_resources,
+	.num_resources	= ARRAY_SIZE(scif6_resources),
 	.dev		= {
 		.platform_data	= &scif6_platform_data,
 	},
 };
 
 static struct plat_sci_port scif7_platform_data = {
-	.mapbase	= 0xfffeb800,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RIE | SCSCR_TIE | SCSCR_RE | SCSCR_TE |
 			  SCSCR_REIE | SCSCR_TOIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
-	.irqs		=  { 261, 262, 263, 260 },
 	.regtype	= SCIx_SH2_SCIF_FIFODATA_REGTYPE,
 };
 
+static struct resource scif7_resources[] = {
+	DEFINE_RES_MEM(0xfffeb800, 0x100),
+	DEFINE_RES_IRQ(261),
+	DEFINE_RES_IRQ(262),
+	DEFINE_RES_IRQ(263),
+	DEFINE_RES_IRQ(260),
+};
+
 static struct platform_device scif7_device = {
 	.name		= "sh-sci",
 	.id		= 7,
+	.resource	= scif7_resources,
+	.num_resources	= ARRAY_SIZE(scif7_resources),
 	.dev		= {
 		.platform_data	= &scif7_platform_data,
 	},
diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7269.c b/arch/sh/kernel/cpu/sh2a/setup-sh7269.c
index e82ae9d..5cdbaac 100644
--- a/arch/sh/kernel/cpu/sh2a/setup-sh7269.c
+++ b/arch/sh/kernel/cpu/sh2a/setup-sh7269.c
@@ -248,152 +248,216 @@ static DECLARE_INTC_DESC(intc_desc, "sh7269", vectors, groups,
 			 mask_registers, prio_registers, NULL);
 
 static struct plat_sci_port scif0_platform_data = {
-	.mapbase	= 0xe8007000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RIE | SCSCR_TIE | SCSCR_RE | SCSCR_TE |
 			  SCSCR_REIE | SCSCR_TOIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
-	.irqs		=  { 259, 260, 261, 258 },
 	.regtype	= SCIx_SH2_SCIF_FIFODATA_REGTYPE,
 };
 
+static struct resource scif0_resources[] = {
+	DEFINE_RES_MEM(0xe8007000, 0x100),
+	DEFINE_RES_IRQ(259),
+	DEFINE_RES_IRQ(260),
+	DEFINE_RES_IRQ(261),
+	DEFINE_RES_IRQ(258),
+};
+
 static struct platform_device scif0_device = {
 	.name		= "sh-sci",
 	.id		= 0,
+	.resource	= scif0_resources,
+	.num_resources	= ARRAY_SIZE(scif0_resources),
 	.dev		= {
 		.platform_data	= &scif0_platform_data,
 	},
 };
 
 static struct plat_sci_port scif1_platform_data = {
-	.mapbase	= 0xe8007800,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RIE | SCSCR_TIE | SCSCR_RE | SCSCR_TE |
 			  SCSCR_REIE | SCSCR_TOIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
-	.irqs		=  { 263, 264, 265, 262 },
 	.regtype	= SCIx_SH2_SCIF_FIFODATA_REGTYPE,
 };
 
+static struct resource scif1_resources[] = {
+	DEFINE_RES_MEM(0xe8007800, 0x100),
+	DEFINE_RES_IRQ(263),
+	DEFINE_RES_IRQ(264),
+	DEFINE_RES_IRQ(265),
+	DEFINE_RES_IRQ(262),
+};
+
 static struct platform_device scif1_device = {
 	.name		= "sh-sci",
 	.id		= 1,
+	.resource	= scif1_resources,
+	.num_resources	= ARRAY_SIZE(scif1_resources),
 	.dev		= {
 		.platform_data	= &scif1_platform_data,
 	},
 };
 
 static struct plat_sci_port scif2_platform_data = {
-	.mapbase	= 0xe8008000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RIE | SCSCR_TIE | SCSCR_RE | SCSCR_TE |
 			  SCSCR_REIE | SCSCR_TOIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
-	.irqs		=  { 267, 268, 269, 266 },
 	.regtype	= SCIx_SH2_SCIF_FIFODATA_REGTYPE,
 };
 
+static struct resource scif2_resources[] = {
+	DEFINE_RES_MEM(0xe8008000, 0x100),
+	DEFINE_RES_IRQ(267),
+	DEFINE_RES_IRQ(268),
+	DEFINE_RES_IRQ(269),
+	DEFINE_RES_IRQ(266),
+};
+
 static struct platform_device scif2_device = {
 	.name		= "sh-sci",
 	.id		= 2,
+	.resource	= scif2_resources,
+	.num_resources	= ARRAY_SIZE(scif2_resources),
 	.dev		= {
 		.platform_data	= &scif2_platform_data,
 	},
 };
 
 static struct plat_sci_port scif3_platform_data = {
-	.mapbase	= 0xe8008800,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RIE | SCSCR_TIE | SCSCR_RE | SCSCR_TE |
 			  SCSCR_REIE | SCSCR_TOIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
-	.irqs		=  { 271, 272, 273, 270 },
 	.regtype	= SCIx_SH2_SCIF_FIFODATA_REGTYPE,
 };
 
+static struct resource scif3_resources[] = {
+	DEFINE_RES_MEM(0xe8008800, 0x100),
+	DEFINE_RES_IRQ(271),
+	DEFINE_RES_IRQ(272),
+	DEFINE_RES_IRQ(273),
+	DEFINE_RES_IRQ(270),
+};
+
 static struct platform_device scif3_device = {
 	.name		= "sh-sci",
 	.id		= 3,
+	.resource	= scif3_resources,
+	.num_resources	= ARRAY_SIZE(scif3_resources),
 	.dev		= {
 		.platform_data	= &scif3_platform_data,
 	},
 };
 
 static struct plat_sci_port scif4_platform_data = {
-	.mapbase	= 0xe8009000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RIE | SCSCR_TIE | SCSCR_RE | SCSCR_TE |
 			  SCSCR_REIE | SCSCR_TOIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
-	.irqs		=  { 275, 276, 277, 274 },
 	.regtype	= SCIx_SH2_SCIF_FIFODATA_REGTYPE,
 };
 
+static struct resource scif4_resources[] = {
+	DEFINE_RES_MEM(0xe8009000, 0x100),
+	DEFINE_RES_IRQ(275),
+	DEFINE_RES_IRQ(276),
+	DEFINE_RES_IRQ(277),
+	DEFINE_RES_IRQ(274),
+};
+
 static struct platform_device scif4_device = {
 	.name		= "sh-sci",
 	.id		= 4,
+	.resource	= scif4_resources,
+	.num_resources	= ARRAY_SIZE(scif4_resources),
 	.dev		= {
 		.platform_data	= &scif4_platform_data,
 	},
 };
 
 static struct plat_sci_port scif5_platform_data = {
-	.mapbase	= 0xe8009800,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RIE | SCSCR_TIE | SCSCR_RE | SCSCR_TE |
 			  SCSCR_REIE | SCSCR_TOIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
-	.irqs		=  { 279, 280, 281, 278 },
 	.regtype	= SCIx_SH2_SCIF_FIFODATA_REGTYPE,
 };
 
+static struct resource scif5_resources[] = {
+	DEFINE_RES_MEM(0xe8009800, 0x100),
+	DEFINE_RES_IRQ(279),
+	DEFINE_RES_IRQ(280),
+	DEFINE_RES_IRQ(281),
+	DEFINE_RES_IRQ(278),
+};
+
 static struct platform_device scif5_device = {
 	.name		= "sh-sci",
 	.id		= 5,
+	.resource	= scif5_resources,
+	.num_resources	= ARRAY_SIZE(scif5_resources),
 	.dev		= {
 		.platform_data	= &scif5_platform_data,
 	},
 };
 
 static struct plat_sci_port scif6_platform_data = {
-	.mapbase	= 0xe800a000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RIE | SCSCR_TIE | SCSCR_RE | SCSCR_TE |
 			  SCSCR_REIE | SCSCR_TOIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
-	.irqs		=  { 283, 284, 285, 282 },
 	.regtype	= SCIx_SH2_SCIF_FIFODATA_REGTYPE,
 };
 
+static struct resource scif6_resources[] = {
+	DEFINE_RES_MEM(0xe800a000, 0x100),
+	DEFINE_RES_IRQ(283),
+	DEFINE_RES_IRQ(284),
+	DEFINE_RES_IRQ(285),
+	DEFINE_RES_IRQ(282),
+};
+
 static struct platform_device scif6_device = {
 	.name		= "sh-sci",
 	.id		= 6,
+	.resource	= scif6_resources,
+	.num_resources	= ARRAY_SIZE(scif6_resources),
 	.dev		= {
 		.platform_data	= &scif6_platform_data,
 	},
 };
 
 static struct plat_sci_port scif7_platform_data = {
-	.mapbase	= 0xe800a800,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RIE | SCSCR_TIE | SCSCR_RE | SCSCR_TE |
 			  SCSCR_REIE | SCSCR_TOIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
-	.irqs		=  { 287, 288, 289, 286 },
 	.regtype	= SCIx_SH2_SCIF_FIFODATA_REGTYPE,
 };
 
+static struct resource scif7_resources[] = {
+	DEFINE_RES_MEM(0xe800a800, 0x100),
+	DEFINE_RES_IRQ(287),
+	DEFINE_RES_IRQ(288),
+	DEFINE_RES_IRQ(289),
+	DEFINE_RES_IRQ(286),
+};
+
 static struct platform_device scif7_device = {
 	.name		= "sh-sci",
 	.id		= 7,
+	.resource	= scif7_resources,
+	.num_resources	= ARRAY_SIZE(scif7_resources),
 	.dev		= {
 		.platform_data	= &scif7_platform_data,
 	},
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7705.c b/arch/sh/kernel/cpu/sh3/setup-sh7705.c
index 03e4c96..10dd0a0 100644
--- a/arch/sh/kernel/cpu/sh3/setup-sh7705.c
+++ b/arch/sh/kernel/cpu/sh3/setup-sh7705.c
@@ -70,39 +70,49 @@ static DECLARE_INTC_DESC(intc_desc, "sh7705", vectors, NULL,
 			 NULL, prio_registers, NULL);
 
 static struct plat_sci_port scif0_platform_data = {
-	.mapbase	= 0xa4410000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_TIE | SCSCR_RIE  | SCSCR_TE |
 			  SCSCR_RE  | SCSCR_CKE1 | SCSCR_CKE0,
 	.scbrr_algo_id	= SCBRR_ALGO_4,
 	.type		= PORT_SCIF,
-	.irqs		= SCIx_IRQ_MUXED(evt2irq(0x900)),
 	.ops		= &sh770x_sci_port_ops,
 	.regtype	= SCIx_SH7705_SCIF_REGTYPE,
 };
 
+static struct resource scif0_resources[] = {
+	DEFINE_RES_MEM(0xa4410000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0x900)),
+};
+
 static struct platform_device scif0_device = {
 	.name		= "sh-sci",
 	.id		= 0,
+	.resource	= scif0_resources,
+	.num_resources	= ARRAY_SIZE(scif0_resources),
 	.dev		= {
 		.platform_data	= &scif0_platform_data,
 	},
 };
 
 static struct plat_sci_port scif1_platform_data = {
-	.mapbase	= 0xa4400000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_TIE | SCSCR_RIE | SCSCR_TE | SCSCR_RE,
 	.scbrr_algo_id	= SCBRR_ALGO_4,
 	.type		= PORT_SCIF,
-	.irqs		= SCIx_IRQ_MUXED(evt2irq(0x880)),
 	.ops		= &sh770x_sci_port_ops,
 	.regtype	= SCIx_SH7705_SCIF_REGTYPE,
 };
 
+static struct resource scif1_resources[] = {
+	DEFINE_RES_MEM(0xa4400000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0x880)),
+};
+
 static struct platform_device scif1_device = {
 	.name		= "sh-sci",
 	.id		= 1,
+	.resource	= scif1_resources,
+	.num_resources	= ARRAY_SIZE(scif1_resources),
 	.dev		= {
 		.platform_data	= &scif1_platform_data,
 	},
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh770x.c b/arch/sh/kernel/cpu/sh3/setup-sh770x.c
index ba26cd9..d5541b0 100644
--- a/arch/sh/kernel/cpu/sh3/setup-sh770x.c
+++ b/arch/sh/kernel/cpu/sh3/setup-sh770x.c
@@ -109,20 +109,25 @@ static struct platform_device rtc_device = {
 };
 
 static struct plat_sci_port scif0_platform_data = {
-	.mapbase	= 0xfffffe80,
 	.port_reg	= 0xa4000136,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_TE | SCSCR_RE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCI,
-	.irqs		= SCIx_IRQ_MUXED(evt2irq(0x4e0)),
 	.ops		= &sh770x_sci_port_ops,
 	.regshift	= 1,
 };
 
+static struct resource scif0_resources[] = {
+	DEFINE_RES_MEM(0xfffffe80, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0x4e0)),
+};
+
 static struct platform_device scif0_device = {
 	.name		= "sh-sci",
 	.id		= 0,
+	.resource	= scif0_resources,
+	.num_resources	= ARRAY_SIZE(scif0_resources),
 	.dev		= {
 		.platform_data	= &scif0_platform_data,
 	},
@@ -131,19 +136,24 @@ static struct platform_device scif0_device = {
     defined(CONFIG_CPU_SUBTYPE_SH7707) || \
     defined(CONFIG_CPU_SUBTYPE_SH7709)
 static struct plat_sci_port scif1_platform_data = {
-	.mapbase	= 0xa4000150,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_TE | SCSCR_RE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
-	.irqs		= SCIx_IRQ_MUXED(evt2irq(0x900)),
 	.ops		= &sh770x_sci_port_ops,
 	.regtype	= SCIx_SH3_SCIF_REGTYPE,
 };
 
+static struct resource scif1_resources[] = {
+	DEFINE_RES_MEM(0xa4000150, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0x900)),
+};
+
 static struct platform_device scif1_device = {
 	.name		= "sh-sci",
 	.id		= 1,
+	.resource	= scif1_resources,
+	.num_resources	= ARRAY_SIZE(scif1_resources),
 	.dev		= {
 		.platform_data	= &scif1_platform_data,
 	},
@@ -152,20 +162,25 @@ static struct platform_device scif1_device = {
 #if defined(CONFIG_CPU_SUBTYPE_SH7707) || \
     defined(CONFIG_CPU_SUBTYPE_SH7709)
 static struct plat_sci_port scif2_platform_data = {
-	.mapbase	= 0xa4000140,
 	.port_reg	= SCIx_NOT_SUPPORTED,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_TE | SCSCR_RE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_IRDA,
-	.irqs		= SCIx_IRQ_MUXED(evt2irq(0x880)),
 	.ops		= &sh770x_sci_port_ops,
 	.regshift	= 1,
 };
 
+static struct resource scif2_resources[] = {
+	DEFINE_RES_MEM(0xa4000140, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0x880)),
+};
+
 static struct platform_device scif2_device = {
 	.name		= "sh-sci",
 	.id		= 2,
+	.resource	= scif2_resources,
+	.num_resources	= ARRAY_SIZE(scif2_resources),
 	.dev		= {
 		.platform_data	= &scif2_platform_data,
 	},
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7710.c b/arch/sh/kernel/cpu/sh3/setup-sh7710.c
index 93c9c5e..de229f5 100644
--- a/arch/sh/kernel/cpu/sh3/setup-sh7710.c
+++ b/arch/sh/kernel/cpu/sh3/setup-sh7710.c
@@ -98,36 +98,46 @@ static struct platform_device rtc_device = {
 };
 
 static struct plat_sci_port scif0_platform_data = {
-	.mapbase	= 0xa4400000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_TE | SCSCR_RE | SCSCR_REIE |
 			  SCSCR_CKE1 | SCSCR_CKE0,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
-	.irqs		= SCIx_IRQ_MUXED(evt2irq(0x880)),
+};
+
+static struct resource scif0_resources[] = {
+	DEFINE_RES_MEM(0xa4400000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0x880)),
 };
 
 static struct platform_device scif0_device = {
 	.name		= "sh-sci",
 	.id		= 0,
+	.resource	= scif0_resources,
+	.num_resources	= ARRAY_SIZE(scif0_resources),
 	.dev		= {
 		.platform_data	= &scif0_platform_data,
 	},
 };
 
 static struct plat_sci_port scif1_platform_data = {
-	.mapbase	= 0xa4410000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_TE | SCSCR_RE | SCSCR_REIE |
 			  SCSCR_CKE1 | SCSCR_CKE0,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
-	.irqs           = SCIx_IRQ_MUXED(evt2irq(0x900)),
+};
+
+static struct resource scif1_resources[] = {
+	DEFINE_RES_MEM(0xa4410000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0x900)),
 };
 
 static struct platform_device scif1_device = {
 	.name		= "sh-sci",
 	.id		= 1,
+	.resource	= scif1_resources,
+	.num_resources	= ARRAY_SIZE(scif1_resources),
 	.dev		= {
 		.platform_data	= &scif1_platform_data,
 	},
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7720.c b/arch/sh/kernel/cpu/sh3/setup-sh7720.c
index 42d991f..ca83581 100644
--- a/arch/sh/kernel/cpu/sh3/setup-sh7720.c
+++ b/arch/sh/kernel/cpu/sh3/setup-sh7720.c
@@ -52,38 +52,48 @@ static struct platform_device rtc_device = {
 };
 
 static struct plat_sci_port scif0_platform_data = {
-	.mapbase	= 0xa4430000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE,
 	.scbrr_algo_id	= SCBRR_ALGO_4,
 	.type		= PORT_SCIF,
-	.irqs		= SCIx_IRQ_MUXED(evt2irq(0xc00)),
 	.ops		= &sh7720_sci_port_ops,
 	.regtype	= SCIx_SH7705_SCIF_REGTYPE,
 };
 
+static struct resource scif0_resources[] = {
+	DEFINE_RES_MEM(0xa4430000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0xc00)),
+};
+
 static struct platform_device scif0_device = {
 	.name		= "sh-sci",
 	.id		= 0,
+	.resource	= scif0_resources,
+	.num_resources	= ARRAY_SIZE(scif0_resources),
 	.dev		= {
 		.platform_data	= &scif0_platform_data,
 	},
 };
 
 static struct plat_sci_port scif1_platform_data = {
-	.mapbase	= 0xa4438000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE,
 	.scbrr_algo_id	= SCBRR_ALGO_4,
 	.type		= PORT_SCIF,
-	.irqs           = SCIx_IRQ_MUXED(evt2irq(0xc20)),
 	.ops		= &sh7720_sci_port_ops,
 	.regtype	= SCIx_SH7705_SCIF_REGTYPE,
 };
 
+static struct resource scif1_resources[] = {
+	DEFINE_RES_MEM(0xa4438000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0xc20)),
+};
+
 static struct platform_device scif1_device = {
 	.name		= "sh-sci",
 	.id		= 1,
+	.resource	= scif1_resources,
+	.num_resources	= ARRAY_SIZE(scif1_resources),
 	.dev		= {
 		.platform_data	= &scif1_platform_data,
 	},
diff --git a/arch/sh/kernel/cpu/sh4/setup-sh4-202.c b/arch/sh/kernel/cpu/sh4/setup-sh4-202.c
index 2a5320a..0fc6a10 100644
--- a/arch/sh/kernel/cpu/sh4/setup-sh4-202.c
+++ b/arch/sh/kernel/cpu/sh4/setup-sh4-202.c
@@ -17,20 +17,25 @@
 #include <linux/io.h>
 
 static struct plat_sci_port scif0_platform_data = {
-	.mapbase	= 0xffe80000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
-	.irqs		= { evt2irq(0x700),
-			    evt2irq(0x720),
-			    evt2irq(0x760),
-			    evt2irq(0x740) },
+};
+
+static struct resource scif0_resources[] = {
+	DEFINE_RES_MEM(0xffe80000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0x700)),
+	DEFINE_RES_IRQ(evt2irq(0x720)),
+	DEFINE_RES_IRQ(evt2irq(0x760)),
+	DEFINE_RES_IRQ(evt2irq(0x740)),
 };
 
 static struct platform_device scif0_device = {
 	.name		= "sh-sci",
 	.id		= 0,
+	.resource	= scif0_resources,
+	.num_resources	= ARRAY_SIZE(scif0_resources),
 	.dev		= {
 		.platform_data	= &scif0_platform_data,
 	},
diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7750.c b/arch/sh/kernel/cpu/sh4/setup-sh7750.c
index 04a4551..5613c15 100644
--- a/arch/sh/kernel/cpu/sh4/setup-sh7750.c
+++ b/arch/sh/kernel/cpu/sh4/setup-sh7750.c
@@ -38,36 +38,46 @@ static struct platform_device rtc_device = {
 };
 
 static struct plat_sci_port sci_platform_data = {
-	.mapbase	= 0xffe00000,
 	.port_reg	= 0xffe0001C,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_TE | SCSCR_RE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCI,
-	.irqs		= SCIx_IRQ_MUXED(evt2irq(0x4e0)),
 	.regshift	= 2,
 };
 
+static struct resource sci_resources[] = {
+	DEFINE_RES_MEM(0xffe00000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0x4e0)),
+};
+
 static struct platform_device sci_device = {
 	.name		= "sh-sci",
 	.id		= 0,
+	.resource	= sci_resources,
+	.num_resources	= ARRAY_SIZE(sci_resources),
 	.dev		= {
 		.platform_data	= &sci_platform_data,
 	},
 };
 
 static struct plat_sci_port scif_platform_data = {
-	.mapbase	= 0xffe80000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_TE | SCSCR_RE | SCSCR_REIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
-	.irqs		= SCIx_IRQ_MUXED(evt2irq(0x700)),
+};
+
+static struct resource scif_resources[] = {
+	DEFINE_RES_MEM(0xffe80000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0x700)),
 };
 
 static struct platform_device scif_device = {
 	.name		= "sh-sci",
 	.id		= 1,
+	.resource	= scif_resources,
+	.num_resources	= ARRAY_SIZE(scif_resources),
 	.dev		= {
 		.platform_data	= &scif_platform_data,
 	},
diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7760.c b/arch/sh/kernel/cpu/sh4/setup-sh7760.c
index 98e075a..a83e6f5 100644
--- a/arch/sh/kernel/cpu/sh4/setup-sh7760.c
+++ b/arch/sh/kernel/cpu/sh4/setup-sh7760.c
@@ -128,83 +128,103 @@ static DECLARE_INTC_DESC(intc_desc_irq, "sh7760-irq", vectors_irq, groups,
 			 mask_registers, prio_registers, NULL);
 
 static struct plat_sci_port scif0_platform_data = {
-	.mapbase	= 0xfe600000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
-	.irqs		= { evt2irq(0x880),
-			    evt2irq(0x8a0),
-			    evt2irq(0x8e0),
-			    evt2irq(0x8c0) },
 	.regtype	= SCIx_SH4_SCIF_FIFODATA_REGTYPE,
 };
 
+static struct resource scif0_resources[] = {
+	DEFINE_RES_MEM(0xfe600000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0x880)),
+	DEFINE_RES_IRQ(evt2irq(0x8a0)),
+	DEFINE_RES_IRQ(evt2irq(0x8e0)),
+	DEFINE_RES_IRQ(evt2irq(0x8c0)),
+};
+
 static struct platform_device scif0_device = {
 	.name		= "sh-sci",
 	.id		= 0,
+	.resource	= scif0_resources,
+	.num_resources	= ARRAY_SIZE(scif0_resources),
 	.dev		= {
 		.platform_data	= &scif0_platform_data,
 	},
 };
 
 static struct plat_sci_port scif1_platform_data = {
-	.mapbase	= 0xfe610000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.type		= PORT_SCIF,
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
-	.irqs		= { evt2irq(0xb00),
-			    evt2irq(0xb20),
-			    evt2irq(0xb60),
-			    evt2irq(0xb40) },
 	.regtype	= SCIx_SH4_SCIF_FIFODATA_REGTYPE,
 };
 
+static struct resource scif1_resources[] = {
+	DEFINE_RES_MEM(0xfe610000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0xb00)),
+	DEFINE_RES_IRQ(evt2irq(0xb20)),
+	DEFINE_RES_IRQ(evt2irq(0xb60)),
+	DEFINE_RES_IRQ(evt2irq(0xb40)),
+};
+
 static struct platform_device scif1_device = {
 	.name		= "sh-sci",
 	.id		= 1,
+	.resource	= scif1_resources,
+	.num_resources	= ARRAY_SIZE(scif1_resources),
 	.dev		= {
 		.platform_data	= &scif1_platform_data,
 	},
 };
 
 static struct plat_sci_port scif2_platform_data = {
-	.mapbase	= 0xfe620000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
-	.irqs		= { evt2irq(0xb80),
-			    evt2irq(0xba0),
-			    evt2irq(0xbe0),
-			    evt2irq(0xbc0) },
 	.regtype	= SCIx_SH4_SCIF_FIFODATA_REGTYPE,
 };
 
+static struct resource scif2_resources[] = {
+	DEFINE_RES_MEM(0xfe620000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0xb80)),
+	DEFINE_RES_IRQ(evt2irq(0xba0)),
+	DEFINE_RES_IRQ(evt2irq(0xbe0)),
+	DEFINE_RES_IRQ(evt2irq(0xbc0)),
+};
+
 static struct platform_device scif2_device = {
 	.name		= "sh-sci",
 	.id		= 2,
+	.resource	= scif2_resources,
+	.num_resources	= ARRAY_SIZE(scif2_resources),
 	.dev		= {
 		.platform_data	= &scif2_platform_data,
 	},
 };
 
 static struct plat_sci_port scif3_platform_data = {
-	.mapbase	= 0xfe480000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCI,
-	.irqs		= { evt2irq(0xc00),
-			    evt2irq(0xc20),
-			    evt2irq(0xc40), },
 	.regshift	= 2,
 };
 
+static struct resource scif3_resources[] = {
+	DEFINE_RES_MEM(0xfe480000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0xc00)),
+	DEFINE_RES_IRQ(evt2irq(0xc20)),
+	DEFINE_RES_IRQ(evt2irq(0xc40)),
+};
+
 static struct platform_device scif3_device = {
 	.name		= "sh-sci",
 	.id		= 3,
+	.resource	= scif3_resources,
+	.num_resources	= ARRAY_SIZE(scif3_resources),
 	.dev		= {
 		.platform_data	= &scif3_platform_data,
 	},
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c
index b91ea83..8b45f67 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c
@@ -18,68 +18,88 @@
 
 /* Serial */
 static struct plat_sci_port scif0_platform_data = {
-	.mapbase        = 0xffe00000,
 	.flags          = UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_CKE1,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type           = PORT_SCIF,
-	.irqs           = SCIx_IRQ_MUXED(evt2irq(0xc00)),
+};
+
+static struct resource scif0_resources[] = {
+	DEFINE_RES_MEM(0xffe00000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0xc00)),
 };
 
 static struct platform_device scif0_device = {
 	.name		= "sh-sci",
 	.id		= 0,
+	.resource	= scif0_resources,
+	.num_resources	= ARRAY_SIZE(scif0_resources),
 	.dev		= {
 		.platform_data	= &scif0_platform_data,
 	},
 };
 
 static struct plat_sci_port scif1_platform_data = {
-	.mapbase        = 0xffe10000,
 	.flags          = UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_CKE1,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type           = PORT_SCIF,
-	.irqs           = SCIx_IRQ_MUXED(evt2irq(0xc20)),
+};
+
+static struct resource scif1_resources[] = {
+	DEFINE_RES_MEM(0xffe10000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0xc20)),
 };
 
 static struct platform_device scif1_device = {
 	.name		= "sh-sci",
 	.id		= 1,
+	.resource	= scif1_resources,
+	.num_resources	= ARRAY_SIZE(scif1_resources),
 	.dev		= {
 		.platform_data	= &scif1_platform_data,
 	},
 };
 
 static struct plat_sci_port scif2_platform_data = {
-	.mapbase        = 0xffe20000,
 	.flags          = UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_CKE1,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type           = PORT_SCIF,
-	.irqs           = SCIx_IRQ_MUXED(evt2irq(0xc40)),
+};
+
+static struct resource scif2_resources[] = {
+	DEFINE_RES_MEM(0xffe20000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0xc40)),
 };
 
 static struct platform_device scif2_device = {
 	.name		= "sh-sci",
 	.id		= 2,
+	.resource	= scif2_resources,
+	.num_resources	= ARRAY_SIZE(scif2_resources),
 	.dev		= {
 		.platform_data	= &scif2_platform_data,
 	},
 };
 
 static struct plat_sci_port scif3_platform_data = {
-	.mapbase        = 0xffe30000,
 	.flags          = UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_CKE1,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type           = PORT_SCIF,
-	.irqs           = SCIx_IRQ_MUXED(evt2irq(0xc60)),
+};
+
+static struct resource scif3_resources[] = {
+	DEFINE_RES_MEM(0xffe30000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0xc60)),
 };
 
 static struct platform_device scif3_device = {
 	.name		= "sh-sci",
 	.id		= 3,
+	.resource	= scif3_resources,
+	.num_resources	= ARRAY_SIZE(scif3_resources),
 	.dev		= {
 		.platform_data	= &scif3_platform_data,
 	},
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c
index 0bd09d5..317f710 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c
@@ -20,18 +20,23 @@
 #include <asm/clock.h>
 
 static struct plat_sci_port scif0_platform_data = {
-	.mapbase	= 0xffe00000,
 	.port_reg	= 0xa405013e,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
-	.irqs		= SCIx_IRQ_MUXED(evt2irq(0xc00)),
+};
+
+static struct resource scif0_resources[] = {
+	DEFINE_RES_MEM(0xffe00000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0xc00)),
 };
 
 static struct platform_device scif0_device = {
 	.name		= "sh-sci",
 	.id		= 0,
+	.resource	= scif0_resources,
+	.num_resources	= ARRAY_SIZE(scif0_resources),
 	.dev		= {
 		.platform_data	= &scif0_platform_data,
 	},
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
index 6a868b0..6aeebb5 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
@@ -179,57 +179,72 @@ struct platform_device dma_device = {
 
 /* Serial */
 static struct plat_sci_port scif0_platform_data = {
-	.mapbase        = 0xffe00000,
 	.flags          = UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type           = PORT_SCIF,
-	.irqs           = SCIx_IRQ_MUXED(evt2irq(0xc00)),
 	.ops		= &sh7722_sci_port_ops,
 	.regtype	= SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE,
 };
 
+static struct resource scif0_resources[] = {
+	DEFINE_RES_MEM(0xffe00000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0xc00)),
+};
+
 static struct platform_device scif0_device = {
 	.name		= "sh-sci",
 	.id		= 0,
+	.resource	= scif0_resources,
+	.num_resources	= ARRAY_SIZE(scif0_resources),
 	.dev		= {
 		.platform_data	= &scif0_platform_data,
 	},
 };
 
 static struct plat_sci_port scif1_platform_data = {
-	.mapbase        = 0xffe10000,
 	.flags          = UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type           = PORT_SCIF,
-	.irqs           = SCIx_IRQ_MUXED(evt2irq(0xc20)),
 	.ops		= &sh7722_sci_port_ops,
 	.regtype	= SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE,
 };
 
+static struct resource scif1_resources[] = {
+	DEFINE_RES_MEM(0xffe10000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0xc20)),
+};
+
 static struct platform_device scif1_device = {
 	.name		= "sh-sci",
 	.id		= 1,
+	.resource	= scif1_resources,
+	.num_resources	= ARRAY_SIZE(scif1_resources),
 	.dev		= {
 		.platform_data	= &scif1_platform_data,
 	},
 };
 
 static struct plat_sci_port scif2_platform_data = {
-	.mapbase        = 0xffe20000,
 	.flags          = UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type           = PORT_SCIF,
-	.irqs           = SCIx_IRQ_MUXED(evt2irq(0xc40)),
 	.ops		= &sh7722_sci_port_ops,
 	.regtype	= SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE,
 };
 
+static struct resource scif2_resources[] = {
+	DEFINE_RES_MEM(0xffe20000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0xc40)),
+};
+
 static struct platform_device scif2_device = {
 	.name		= "sh-sci",
 	.id		= 2,
+	.resource	= scif2_resources,
+	.num_resources	= ARRAY_SIZE(scif2_resources),
 	.dev		= {
 		.platform_data	= &scif2_platform_data,
 	},
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
index 28d6fd8..521a09e 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
@@ -23,111 +23,141 @@
 
 /* Serial */
 static struct plat_sci_port scif0_platform_data = {
-	.mapbase        = 0xffe00000,
 	.port_reg	= 0xa4050160,
 	.flags          = UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type           = PORT_SCIF,
-	.irqs           = SCIx_IRQ_MUXED(evt2irq(0xc00)),
 	.regtype	= SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE,
 };
 
+static struct resource scif0_resources[] = {
+	DEFINE_RES_MEM(0xffe00000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0xc00)),
+};
+
 static struct platform_device scif0_device = {
 	.name		= "sh-sci",
 	.id		= 0,
+	.resource	= scif0_resources,
+	.num_resources	= ARRAY_SIZE(scif0_resources),
 	.dev		= {
 		.platform_data	= &scif0_platform_data,
 	},
 };
 
 static struct plat_sci_port scif1_platform_data = {
-	.mapbase        = 0xffe10000,
 	.port_reg	= SCIx_NOT_SUPPORTED,
 	.flags          = UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type           = PORT_SCIF,
-	.irqs           = SCIx_IRQ_MUXED(evt2irq(0xc20)),
 	.regtype	= SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE,
 };
 
+static struct resource scif1_resources[] = {
+	DEFINE_RES_MEM(0xffe10000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0xc20)),
+};
+
 static struct platform_device scif1_device = {
 	.name		= "sh-sci",
 	.id		= 1,
+	.resource	= scif1_resources,
+	.num_resources	= ARRAY_SIZE(scif1_resources),
 	.dev		= {
 		.platform_data	= &scif1_platform_data,
 	},
 };
 
 static struct plat_sci_port scif2_platform_data = {
-	.mapbase        = 0xffe20000,
 	.port_reg	= SCIx_NOT_SUPPORTED,
 	.flags          = UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type           = PORT_SCIF,
-	.irqs           = SCIx_IRQ_MUXED(evt2irq(0xc40)),
 	.regtype	= SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE,
 };
 
+static struct resource scif2_resources[] = {
+	DEFINE_RES_MEM(0xffe20000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0xc40)),
+};
+
 static struct platform_device scif2_device = {
 	.name		= "sh-sci",
 	.id		= 2,
+	.resource	= scif2_resources,
+	.num_resources	= ARRAY_SIZE(scif2_resources),
 	.dev		= {
 		.platform_data	= &scif2_platform_data,
 	},
 };
 
 static struct plat_sci_port scif3_platform_data = {
-	.mapbase        = 0xa4e30000,
 	.flags          = UPF_BOOT_AUTOCONF,
 	.port_reg	= SCIx_NOT_SUPPORTED,
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE,
 	.scbrr_algo_id	= SCBRR_ALGO_3,
 	.type           = PORT_SCIFA,
-	.irqs           = SCIx_IRQ_MUXED(evt2irq(0x900)),
+};
+
+static struct resource scif3_resources[] = {
+	DEFINE_RES_MEM(0xa4e30000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0x900)),
 };
 
 static struct platform_device scif3_device = {
 	.name		= "sh-sci",
 	.id		= 3,
+	.resource	= scif3_resources,
+	.num_resources	= ARRAY_SIZE(scif3_resources),
 	.dev		= {
 		.platform_data	= &scif3_platform_data,
 	},
 };
 
 static struct plat_sci_port scif4_platform_data = {
-	.mapbase        = 0xa4e40000,
 	.port_reg	= SCIx_NOT_SUPPORTED,
 	.flags          = UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE,
 	.scbrr_algo_id	= SCBRR_ALGO_3,
 	.type           = PORT_SCIFA,
-	.irqs           = SCIx_IRQ_MUXED(evt2irq(0xd00)),
+};
+
+static struct resource scif4_resources[] = {
+	DEFINE_RES_MEM(0xa4e40000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0xd00)),
 };
 
 static struct platform_device scif4_device = {
 	.name		= "sh-sci",
 	.id		= 4,
+	.resource	= scif4_resources,
+	.num_resources	= ARRAY_SIZE(scif4_resources),
 	.dev		= {
 		.platform_data	= &scif4_platform_data,
 	},
 };
 
 static struct plat_sci_port scif5_platform_data = {
-	.mapbase        = 0xa4e50000,
 	.port_reg	= SCIx_NOT_SUPPORTED,
 	.flags          = UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE,
 	.scbrr_algo_id	= SCBRR_ALGO_3,
 	.type           = PORT_SCIFA,
-	.irqs           = SCIx_IRQ_MUXED(evt2irq(0xfa0)),
+};
+
+static struct resource scif5_resources[] = {
+	DEFINE_RES_MEM(0xa4e50000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0xfa0)),
 };
 
 static struct platform_device scif5_device = {
 	.name		= "sh-sci",
 	.id		= 5,
+	.resource	= scif5_resources,
+	.num_resources	= ARRAY_SIZE(scif5_resources),
 	.dev		= {
 		.platform_data	= &scif5_platform_data,
 	},
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c
index 26b74c2..fb0a237 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c
@@ -290,111 +290,141 @@ static struct platform_device dma1_device = {
 
 /* Serial */
 static struct plat_sci_port scif0_platform_data = {
-	.mapbase        = 0xffe00000,
 	.port_reg	= SCIx_NOT_SUPPORTED,
 	.flags          = UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type           = PORT_SCIF,
-	.irqs           = SCIx_IRQ_MUXED(evt2irq(0xc00)),
 	.regtype	= SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE,
 };
 
+static struct resource scif0_resources[] = {
+	DEFINE_RES_MEM(0xffe00000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0xc00)),
+};
+
 static struct platform_device scif0_device = {
 	.name		= "sh-sci",
 	.id		= 0,
+	.resource	= scif0_resources,
+	.num_resources	= ARRAY_SIZE(scif0_resources),
 	.dev		= {
 		.platform_data	= &scif0_platform_data,
 	},
 };
 
 static struct plat_sci_port scif1_platform_data = {
-	.mapbase        = 0xffe10000,
 	.port_reg	= SCIx_NOT_SUPPORTED,
 	.flags          = UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type           = PORT_SCIF,
-	.irqs           = SCIx_IRQ_MUXED(evt2irq(0xc20)),
 	.regtype	= SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE,
 };
 
+static struct resource scif1_resources[] = {
+	DEFINE_RES_MEM(0xffe10000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0xc20)),
+};
+
 static struct platform_device scif1_device = {
 	.name		= "sh-sci",
 	.id		= 1,
+	.resource	= scif1_resources,
+	.num_resources	= ARRAY_SIZE(scif1_resources),
 	.dev		= {
 		.platform_data	= &scif1_platform_data,
 	},
 };
 
 static struct plat_sci_port scif2_platform_data = {
-	.mapbase        = 0xffe20000,
 	.port_reg	= SCIx_NOT_SUPPORTED,
 	.flags          = UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type           = PORT_SCIF,
-	.irqs           = SCIx_IRQ_MUXED(evt2irq(0xc40)),
 	.regtype	= SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE,
 };
 
+static struct resource scif2_resources[] = {
+	DEFINE_RES_MEM(0xffe20000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0xc40)),
+};
+
 static struct platform_device scif2_device = {
 	.name		= "sh-sci",
 	.id		= 2,
+	.resource	= scif2_resources,
+	.num_resources	= ARRAY_SIZE(scif2_resources),
 	.dev		= {
 		.platform_data	= &scif2_platform_data,
 	},
 };
 
 static struct plat_sci_port scif3_platform_data = {
-	.mapbase        = 0xa4e30000,
 	.port_reg	= SCIx_NOT_SUPPORTED,
 	.flags          = UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE,
 	.scbrr_algo_id	= SCBRR_ALGO_3,
 	.type           = PORT_SCIFA,
-	.irqs           = SCIx_IRQ_MUXED(evt2irq(0x900)),
+};
+
+static struct resource scif3_resources[] = {
+	DEFINE_RES_MEM(0xa4e30000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0x900)),
 };
 
 static struct platform_device scif3_device = {
 	.name		= "sh-sci",
 	.id		= 3,
+	.resource	= scif3_resources,
+	.num_resources	= ARRAY_SIZE(scif3_resources),
 	.dev		= {
 		.platform_data	= &scif3_platform_data,
 	},
 };
 
 static struct plat_sci_port scif4_platform_data = {
-	.mapbase        = 0xa4e40000,
 	.port_reg	= SCIx_NOT_SUPPORTED,
 	.flags          = UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE,
 	.scbrr_algo_id	= SCBRR_ALGO_3,
 	.type           = PORT_SCIFA,
-	.irqs           = SCIx_IRQ_MUXED(evt2irq(0xd00)),
+};
+
+static struct resource scif4_resources[] = {
+	DEFINE_RES_MEM(0xa4e40000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0xd00)),
 };
 
 static struct platform_device scif4_device = {
 	.name		= "sh-sci",
 	.id		= 4,
+	.resource	= scif4_resources,
+	.num_resources	= ARRAY_SIZE(scif4_resources),
 	.dev		= {
 		.platform_data	= &scif4_platform_data,
 	},
 };
 
 static struct plat_sci_port scif5_platform_data = {
-	.mapbase        = 0xa4e50000,
 	.port_reg	= SCIx_NOT_SUPPORTED,
 	.flags          = UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE,
 	.scbrr_algo_id	= SCBRR_ALGO_3,
 	.type           = PORT_SCIFA,
-	.irqs           = SCIx_IRQ_MUXED(evt2irq(0xfa0)),
+};
+
+static struct resource scif5_resources[] = {
+	DEFINE_RES_MEM(0xa4e50000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0xfa0)),
 };
 
 static struct platform_device scif5_device = {
 	.name		= "sh-sci",
 	.id		= 5,
+	.resource	= scif5_resources,
+	.num_resources	= ARRAY_SIZE(scif5_resources),
 	.dev		= {
 		.platform_data	= &scif5_platform_data,
 	},
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7734.c b/arch/sh/kernel/cpu/sh4a/setup-sh7734.c
index f799971..bedf8fb 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7734.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7734.c
@@ -25,108 +25,138 @@
 
 /* SCIF */
 static struct plat_sci_port scif0_platform_data = {
-	.mapbase        = 0xFFE40000,
 	.flags          = UPF_BOOT_AUTOCONF,
 	.scscr          = SCSCR_RE | SCSCR_TE | SCSCR_REIE,
 	.scbrr_algo_id  = SCBRR_ALGO_2,
 	.type           = PORT_SCIF,
-	.irqs           = SCIx_IRQ_MUXED(evt2irq(0x8C0)),
 	.regtype        = SCIx_SH4_SCIF_REGTYPE,
 };
 
+static struct resource scif0_resources[] = {
+	DEFINE_RES_MEM(0xffe40000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0x8c0)),
+};
+
 static struct platform_device scif0_device = {
 	.name		= "sh-sci",
-	.id			= 0,
+	.id		= 0,
+	.resource	= scif0_resources,
+	.num_resources	= ARRAY_SIZE(scif0_resources),
 	.dev		= {
 		.platform_data	= &scif0_platform_data,
 	},
 };
 
 static struct plat_sci_port scif1_platform_data = {
-	.mapbase        = 0xFFE41000,
 	.flags          = UPF_BOOT_AUTOCONF,
 	.scscr          = SCSCR_RE | SCSCR_TE | SCSCR_REIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type           = PORT_SCIF,
-	.irqs           = SCIx_IRQ_MUXED(evt2irq(0x8E0)),
 	.regtype        = SCIx_SH4_SCIF_REGTYPE,
 };
 
+static struct resource scif1_resources[] = {
+	DEFINE_RES_MEM(0xffe41000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0x8e0)),
+};
+
 static struct platform_device scif1_device = {
 	.name		= "sh-sci",
-	.id         = 1,
+	.id		= 1,
+	.resource	= scif1_resources,
+	.num_resources	= ARRAY_SIZE(scif1_resources),
 	.dev		= {
 		.platform_data = &scif1_platform_data,
 	},
 };
 
 static struct plat_sci_port scif2_platform_data = {
-	.mapbase        = 0xFFE42000,
 	.flags          = UPF_BOOT_AUTOCONF,
 	.scscr          = SCSCR_RE | SCSCR_TE | SCSCR_REIE,
 	.scbrr_algo_id  = SCBRR_ALGO_2,
 	.type           = PORT_SCIF,
-	.irqs           = SCIx_IRQ_MUXED(evt2irq(0x900)),
 	.regtype        = SCIx_SH4_SCIF_REGTYPE,
 };
 
+static struct resource scif2_resources[] = {
+	DEFINE_RES_MEM(0xffe42000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0x900)),
+};
+
 static struct platform_device scif2_device = {
 	.name		= "sh-sci",
-	.id         = 2,
+	.id		= 2,
+	.resource	= scif2_resources,
+	.num_resources	= ARRAY_SIZE(scif2_resources),
 	.dev		= {
 		.platform_data = &scif2_platform_data,
 	},
 };
 
 static struct plat_sci_port scif3_platform_data = {
-	.mapbase        = 0xFFE43000,
 	.flags          = UPF_BOOT_AUTOCONF,
 	.scscr          = SCSCR_RE | SCSCR_TE | SCSCR_REIE | SCSCR_TOIE,
 	.scbrr_algo_id  = SCBRR_ALGO_2,
 	.type           = PORT_SCIF,
-	.irqs           = SCIx_IRQ_MUXED(evt2irq(0x920)),
 	.regtype        = SCIx_SH4_SCIF_REGTYPE,
 };
 
+static struct resource scif3_resources[] = {
+	DEFINE_RES_MEM(0xffe43000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0x920)),
+};
+
 static struct platform_device scif3_device = {
 	.name		= "sh-sci",
-	.id	        = 3,
+	.id		= 3,
+	.resource	= scif3_resources,
+	.num_resources	= ARRAY_SIZE(scif3_resources),
 	.dev		= {
 		.platform_data	= &scif3_platform_data,
 	},
 };
 
 static struct plat_sci_port scif4_platform_data = {
-	.mapbase        = 0xFFE44000,
 	.flags          = UPF_BOOT_AUTOCONF,
 	.scscr          = SCSCR_RE | SCSCR_TE | SCSCR_REIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type           = PORT_SCIF,
-	.irqs           = SCIx_IRQ_MUXED(evt2irq(0x940)),
 	.regtype        = SCIx_SH4_SCIF_REGTYPE,
 };
 
+static struct resource scif4_resources[] = {
+	DEFINE_RES_MEM(0xffe44000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0x940)),
+};
+
 static struct platform_device scif4_device = {
 	.name		= "sh-sci",
-	.id	        = 4,
+	.id		= 4,
+	.resource	= scif4_resources,
+	.num_resources	= ARRAY_SIZE(scif4_resources),
 	.dev		= {
 		.platform_data	= &scif4_platform_data,
 	},
 };
 
 static struct plat_sci_port scif5_platform_data = {
-	.mapbase        = 0xFFE43000,
 	.flags          = UPF_BOOT_AUTOCONF,
 	.scscr          = SCSCR_RE | SCSCR_TE | SCSCR_REIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type           = PORT_SCIF,
-	.irqs           = SCIx_IRQ_MUXED(evt2irq(0x960)),
 	.regtype		= SCIx_SH4_SCIF_REGTYPE,
 };
 
+static struct resource scif5_resources[] = {
+	DEFINE_RES_MEM(0xffe43000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0x960)),
+};
+
 static struct platform_device scif5_device = {
 	.name		= "sh-sci",
-	.id	        = 5,
+	.id		= 5,
+	.resource	= scif5_resources,
+	.num_resources	= ARRAY_SIZE(scif5_resources),
 	.dev		= {
 		.platform_data	= &scif5_platform_data,
 	},
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7757.c b/arch/sh/kernel/cpu/sh4a/setup-sh7757.c
index 9079a0f..6b8d0e6 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7757.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7757.c
@@ -24,51 +24,66 @@
 #include <cpu/sh7757.h>
 
 static struct plat_sci_port scif2_platform_data = {
-	.mapbase	= 0xfe4b0000,		/* SCIF2 */
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
-	.irqs		= SCIx_IRQ_MUXED(evt2irq(0x700)),
+};
+
+static struct resource scif2_resources[] = {
+	DEFINE_RES_MEM(0xfe4b0000, 0x100),		/* SCIF2 */
+	DEFINE_RES_IRQ(evt2irq(0x700)),
 };
 
 static struct platform_device scif2_device = {
 	.name		= "sh-sci",
 	.id		= 0,
+	.resource	= scif2_resources,
+	.num_resources	= ARRAY_SIZE(scif2_resources),
 	.dev		= {
 		.platform_data	= &scif2_platform_data,
 	},
 };
 
 static struct plat_sci_port scif3_platform_data = {
-	.mapbase	= 0xfe4c0000,		/* SCIF3 */
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
-	.irqs		= SCIx_IRQ_MUXED(evt2irq(0xb80)),
+};
+
+static struct resource scif3_resources[] = {
+	DEFINE_RES_MEM(0xfe4c0000, 0x100),		/* SCIF3 */
+	DEFINE_RES_IRQ(evt2irq(0xb80)),
 };
 
 static struct platform_device scif3_device = {
 	.name		= "sh-sci",
 	.id		= 1,
+	.resource	= scif3_resources,
+	.num_resources	= ARRAY_SIZE(scif3_resources),
 	.dev		= {
 		.platform_data	= &scif3_platform_data,
 	},
 };
 
 static struct plat_sci_port scif4_platform_data = {
-	.mapbase	= 0xfe4d0000,		/* SCIF4 */
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
-	.irqs		= SCIx_IRQ_MUXED(evt2irq(0xF00)),
+};
+
+static struct resource scif4_resources[] = {
+	DEFINE_RES_MEM(0xfe4d0000, 0x100),		/* SCIF4 */
+	DEFINE_RES_IRQ(evt2irq(0xf00)),
 };
 
 static struct platform_device scif4_device = {
 	.name		= "sh-sci",
 	.id		= 2,
+	.resource	= scif4_resources,
+	.num_resources	= ARRAY_SIZE(scif4_resources),
 	.dev		= {
 		.platform_data	= &scif4_platform_data,
 	},
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
index 1686aca..940505c 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
@@ -19,54 +19,69 @@
 #include <linux/usb/ohci_pdriver.h>
 
 static struct plat_sci_port scif0_platform_data = {
-	.mapbase	= 0xffe00000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
-	.irqs		= SCIx_IRQ_MUXED(evt2irq(0x700)),
 	.regtype	= SCIx_SH4_SCIF_FIFODATA_REGTYPE,
 };
 
+static struct resource scif0_resources[] = {
+	DEFINE_RES_MEM(0xffe00000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0x700)),
+};
+
 static struct platform_device scif0_device = {
 	.name		= "sh-sci",
 	.id		= 0,
+	.resource	= scif0_resources,
+	.num_resources	= ARRAY_SIZE(scif0_resources),
 	.dev		= {
 		.platform_data	= &scif0_platform_data,
 	},
 };
 
 static struct plat_sci_port scif1_platform_data = {
-	.mapbase	= 0xffe08000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
-	.irqs		= SCIx_IRQ_MUXED(evt2irq(0xb80)),
 	.regtype	= SCIx_SH4_SCIF_FIFODATA_REGTYPE,
 };
 
+static struct resource scif1_resources[] = {
+	DEFINE_RES_MEM(0xffe08000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0xb80)),
+};
+
 static struct platform_device scif1_device = {
 	.name		= "sh-sci",
 	.id		= 1,
+	.resource	= scif1_resources,
+	.num_resources	= ARRAY_SIZE(scif1_resources),
 	.dev		= {
 		.platform_data	= &scif1_platform_data,
 	},
 };
 
 static struct plat_sci_port scif2_platform_data = {
-	.mapbase	= 0xffe10000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
-	.irqs		= SCIx_IRQ_MUXED(evt2irq(0xf00)),
 	.regtype	= SCIx_SH4_SCIF_FIFODATA_REGTYPE,
 };
 
+static struct resource scif2_resources[] = {
+	DEFINE_RES_MEM(0xffe10000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0xf00)),
+};
+
 static struct platform_device scif2_device = {
 	.name		= "sh-sci",
 	.id		= 2,
+	.resource	= scif2_resources,
+	.num_resources	= ARRAY_SIZE(scif2_resources),
 	.dev		= {
 		.platform_data	= &scif2_platform_data,
 	},
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7770.c b/arch/sh/kernel/cpu/sh4a/setup-sh7770.c
index 256ea7a..f9c04de 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7770.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7770.c
@@ -16,170 +16,220 @@
 #include <linux/io.h>
 
 static struct plat_sci_port scif0_platform_data = {
-	.mapbase	= 0xff923000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE | SCSCR_TOIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
-	.irqs		= SCIx_IRQ_MUXED(evt2irq(0x9a0)),
+};
+
+static struct resource scif0_resources[] = {
+	DEFINE_RES_MEM(0xff923000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0x9a0)),
 };
 
 static struct platform_device scif0_device = {
 	.name		= "sh-sci",
 	.id		= 0,
+	.resource	= scif0_resources,
+	.num_resources	= ARRAY_SIZE(scif0_resources),
 	.dev		= {
 		.platform_data	= &scif0_platform_data,
 	},
 };
 
 static struct plat_sci_port scif1_platform_data = {
-	.mapbase	= 0xff924000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE | SCSCR_TOIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
-	.irqs		= SCIx_IRQ_MUXED(evt2irq(0x9c0)),
+};
+
+static struct resource scif1_resources[] = {
+	DEFINE_RES_MEM(0xff924000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0x9c0)),
 };
 
 static struct platform_device scif1_device = {
 	.name		= "sh-sci",
 	.id		= 1,
+	.resource	= scif1_resources,
+	.num_resources	= ARRAY_SIZE(scif1_resources),
 	.dev		= {
 		.platform_data	= &scif1_platform_data,
 	},
 };
 
 static struct plat_sci_port scif2_platform_data = {
-	.mapbase	= 0xff925000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE | SCSCR_TOIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
-	.irqs		= SCIx_IRQ_MUXED(evt2irq(0x9e0)),
+};
+
+static struct resource scif2_resources[] = {
+	DEFINE_RES_MEM(0xff925000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0x9e0)),
 };
 
 static struct platform_device scif2_device = {
 	.name		= "sh-sci",
 	.id		= 2,
+	.resource	= scif2_resources,
+	.num_resources	= ARRAY_SIZE(scif2_resources),
 	.dev		= {
 		.platform_data	= &scif2_platform_data,
 	},
 };
 
 static struct plat_sci_port scif3_platform_data = {
-	.mapbase	= 0xff926000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE | SCSCR_TOIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
-	.irqs		= SCIx_IRQ_MUXED(evt2irq(0xa00)),
+};
+
+static struct resource scif3_resources[] = {
+	DEFINE_RES_MEM(0xff926000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0xa00)),
 };
 
 static struct platform_device scif3_device = {
 	.name		= "sh-sci",
 	.id		= 3,
+	.resource	= scif3_resources,
+	.num_resources	= ARRAY_SIZE(scif3_resources),
 	.dev		= {
 		.platform_data	= &scif3_platform_data,
 	},
 };
 
 static struct plat_sci_port scif4_platform_data = {
-	.mapbase	= 0xff927000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE | SCSCR_TOIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
-	.irqs		= SCIx_IRQ_MUXED(evt2irq(0xa20)),
+};
+
+static struct resource scif4_resources[] = {
+	DEFINE_RES_MEM(0xff927000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0xa20)),
 };
 
 static struct platform_device scif4_device = {
 	.name		= "sh-sci",
 	.id		= 4,
+	.resource	= scif4_resources,
+	.num_resources	= ARRAY_SIZE(scif4_resources),
 	.dev		= {
 		.platform_data	= &scif4_platform_data,
 	},
 };
 
 static struct plat_sci_port scif5_platform_data = {
-	.mapbase	= 0xff928000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE | SCSCR_TOIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
-	.irqs		= SCIx_IRQ_MUXED(evt2irq(0xa40)),
+};
+
+static struct resource scif5_resources[] = {
+	DEFINE_RES_MEM(0xff928000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0xa40)),
 };
 
 static struct platform_device scif5_device = {
 	.name		= "sh-sci",
 	.id		= 5,
+	.resource	= scif5_resources,
+	.num_resources	= ARRAY_SIZE(scif5_resources),
 	.dev		= {
 		.platform_data	= &scif5_platform_data,
 	},
 };
 
 static struct plat_sci_port scif6_platform_data = {
-	.mapbase	= 0xff929000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE | SCSCR_TOIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
-	.irqs		= SCIx_IRQ_MUXED(evt2irq(0xa60)),
+};
+
+static struct resource scif6_resources[] = {
+	DEFINE_RES_MEM(0xff929000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0xa60)),
 };
 
 static struct platform_device scif6_device = {
 	.name		= "sh-sci",
 	.id		= 6,
+	.resource	= scif6_resources,
+	.num_resources	= ARRAY_SIZE(scif6_resources),
 	.dev		= {
 		.platform_data	= &scif6_platform_data,
 	},
 };
 
 static struct plat_sci_port scif7_platform_data = {
-	.mapbase	= 0xff92a000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE | SCSCR_TOIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
-	.irqs		= SCIx_IRQ_MUXED(evt2irq(0xa80)),
+};
+
+static struct resource scif7_resources[] = {
+	DEFINE_RES_MEM(0xff92a000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0xa80)),
 };
 
 static struct platform_device scif7_device = {
 	.name		= "sh-sci",
 	.id		= 7,
+	.resource	= scif7_resources,
+	.num_resources	= ARRAY_SIZE(scif7_resources),
 	.dev		= {
 		.platform_data	= &scif7_platform_data,
 	},
 };
 
 static struct plat_sci_port scif8_platform_data = {
-	.mapbase	= 0xff92b000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE | SCSCR_TOIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
-	.irqs		= SCIx_IRQ_MUXED(evt2irq(0xaa0)),
+};
+
+static struct resource scif8_resources[] = {
+	DEFINE_RES_MEM(0xff92b000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0xaa0)),
 };
 
 static struct platform_device scif8_device = {
 	.name		= "sh-sci",
 	.id		= 8,
+	.resource	= scif8_resources,
+	.num_resources	= ARRAY_SIZE(scif8_resources),
 	.dev		= {
 		.platform_data	= &scif8_platform_data,
 	},
 };
 
 static struct plat_sci_port scif9_platform_data = {
-	.mapbase	= 0xff92c000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE | SCSCR_TOIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
-	.irqs		= SCIx_IRQ_MUXED(evt2irq(0xac0)),
+};
+
+static struct resource scif9_resources[] = {
+	DEFINE_RES_MEM(0xff92c000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0xac0)),
 };
 
 static struct platform_device scif9_device = {
 	.name		= "sh-sci",
 	.id		= 9,
+	.resource	= scif9_resources,
+	.num_resources	= ARRAY_SIZE(scif9_resources),
 	.dev		= {
 		.platform_data	= &scif9_platform_data,
 	},
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
index de45b70..227f8f4 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
@@ -18,36 +18,46 @@
 #include <cpu/dma-register.h>
 
 static struct plat_sci_port scif0_platform_data = {
-	.mapbase	= 0xffe00000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE | SCSCR_CKE1,
 	.scbrr_algo_id	= SCBRR_ALGO_1,
 	.type		= PORT_SCIF,
-	.irqs		= SCIx_IRQ_MUXED(evt2irq(0x700)),
 	.regtype	= SCIx_SH4_SCIF_FIFODATA_REGTYPE,
 };
 
+static struct resource scif0_resources[] = {
+	DEFINE_RES_MEM(0xffe00000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0x700)),
+};
+
 static struct platform_device scif0_device = {
 	.name		= "sh-sci",
 	.id		= 0,
+	.resource	= scif0_resources,
+	.num_resources	= ARRAY_SIZE(scif0_resources),
 	.dev		= {
 		.platform_data	= &scif0_platform_data,
 	},
 };
 
 static struct plat_sci_port scif1_platform_data = {
-	.mapbase	= 0xffe10000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE | SCSCR_CKE1,
 	.scbrr_algo_id	= SCBRR_ALGO_1,
 	.type		= PORT_SCIF,
-	.irqs		= SCIx_IRQ_MUXED(evt2irq(0xb80)),
 	.regtype	= SCIx_SH4_SCIF_FIFODATA_REGTYPE,
 };
 
+static struct resource scif1_resources[] = {
+	DEFINE_RES_MEM(0xffe10000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0xb80)),
+};
+
 static struct platform_device scif1_device = {
 	.name		= "sh-sci",
 	.id		= 1,
+	.resource	= scif1_resources,
+	.num_resources	= ARRAY_SIZE(scif1_resources),
 	.dev		= {
 		.platform_data	= &scif1_platform_data,
 	},
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
index 0968ecb..b9f64c1 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
@@ -20,108 +20,138 @@
 #include <cpu/dma-register.h>
 
 static struct plat_sci_port scif0_platform_data = {
-	.mapbase	= 0xffea0000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE | SCSCR_CKE1,
 	.scbrr_algo_id	= SCBRR_ALGO_1,
 	.type		= PORT_SCIF,
-	.irqs		= SCIx_IRQ_MUXED(evt2irq(0x700)),
 	.regtype	= SCIx_SH4_SCIF_FIFODATA_REGTYPE,
 };
 
+static struct resource scif0_resources[] = {
+	DEFINE_RES_MEM(0xffea0000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0x700)),
+};
+
 static struct platform_device scif0_device = {
 	.name		= "sh-sci",
 	.id		= 0,
+	.resource	= scif0_resources,
+	.num_resources	= ARRAY_SIZE(scif0_resources),
 	.dev		= {
 		.platform_data	= &scif0_platform_data,
 	},
 };
 
 static struct plat_sci_port scif1_platform_data = {
-	.mapbase	= 0xffeb0000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE | SCSCR_CKE1,
 	.scbrr_algo_id	= SCBRR_ALGO_1,
 	.type		= PORT_SCIF,
-	.irqs		= SCIx_IRQ_MUXED(evt2irq(0x780)),
 	.regtype	= SCIx_SH4_SCIF_FIFODATA_REGTYPE,
 };
 
+static struct resource scif1_resources[] = {
+	DEFINE_RES_MEM(0xffeb0000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0x780)),
+};
+
 static struct platform_device scif1_device = {
 	.name		= "sh-sci",
 	.id		= 1,
+	.resource	= scif1_resources,
+	.num_resources	= ARRAY_SIZE(scif1_resources),
 	.dev		= {
 		.platform_data	= &scif1_platform_data,
 	},
 };
 
 static struct plat_sci_port scif2_platform_data = {
-	.mapbase	= 0xffec0000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE | SCSCR_CKE1,
 	.scbrr_algo_id	= SCBRR_ALGO_1,
 	.type		= PORT_SCIF,
-	.irqs		= SCIx_IRQ_MUXED(evt2irq(0x980)),
 	.regtype	= SCIx_SH4_SCIF_FIFODATA_REGTYPE,
 };
 
+static struct resource scif2_resources[] = {
+	DEFINE_RES_MEM(0xffec0000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0x980)),
+};
+
 static struct platform_device scif2_device = {
 	.name		= "sh-sci",
 	.id		= 2,
+	.resource	= scif2_resources,
+	.num_resources	= ARRAY_SIZE(scif2_resources),
 	.dev		= {
 		.platform_data	= &scif2_platform_data,
 	},
 };
 
 static struct plat_sci_port scif3_platform_data = {
-	.mapbase	= 0xffed0000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE | SCSCR_CKE1,
 	.scbrr_algo_id	= SCBRR_ALGO_1,
 	.type		= PORT_SCIF,
-	.irqs		= SCIx_IRQ_MUXED(evt2irq(0x9a0)),
 	.regtype	= SCIx_SH4_SCIF_FIFODATA_REGTYPE,
 };
 
+static struct resource scif3_resources[] = {
+	DEFINE_RES_MEM(0xffed0000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0x9a0)),
+};
+
 static struct platform_device scif3_device = {
 	.name		= "sh-sci",
 	.id		= 3,
+	.resource	= scif3_resources,
+	.num_resources	= ARRAY_SIZE(scif3_resources),
 	.dev		= {
 		.platform_data	= &scif3_platform_data,
 	},
 };
 
 static struct plat_sci_port scif4_platform_data = {
-	.mapbase	= 0xffee0000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE | SCSCR_CKE1,
 	.scbrr_algo_id	= SCBRR_ALGO_1,
 	.type		= PORT_SCIF,
-	.irqs		= SCIx_IRQ_MUXED(evt2irq(0x9c0)),
 	.regtype	= SCIx_SH4_SCIF_FIFODATA_REGTYPE,
 };
 
+static struct resource scif4_resources[] = {
+	DEFINE_RES_MEM(0xffee0000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0x9c0)),
+};
+
 static struct platform_device scif4_device = {
 	.name		= "sh-sci",
 	.id		= 4,
+	.resource	= scif4_resources,
+	.num_resources	= ARRAY_SIZE(scif4_resources),
 	.dev		= {
 		.platform_data	= &scif4_platform_data,
 	},
 };
 
 static struct plat_sci_port scif5_platform_data = {
-	.mapbase	= 0xffef0000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE | SCSCR_CKE1,
 	.scbrr_algo_id	= SCBRR_ALGO_1,
 	.type		= PORT_SCIF,
-	.irqs		= SCIx_IRQ_MUXED(evt2irq(0x9e0)),
 	.regtype	= SCIx_SH4_SCIF_FIFODATA_REGTYPE,
 };
 
+static struct resource scif5_resources[] = {
+	DEFINE_RES_MEM(0xffef0000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0x9e0)),
+};
+
 static struct platform_device scif5_device = {
 	.name		= "sh-sci",
 	.id		= 5,
+	.resource	= scif5_resources,
+	.num_resources	= ARRAY_SIZE(scif5_resources),
 	.dev		= {
 		.platform_data	= &scif5_platform_data,
 	},
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c
index ab52d4d..92b95ce 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c
@@ -28,21 +28,26 @@
 #include <asm/mmzone.h>
 
 static struct plat_sci_port scif0_platform_data = {
-	.mapbase	= 0xffea0000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE | SCSCR_CKE1,
 	.scbrr_algo_id	= SCBRR_ALGO_1,
 	.type		= PORT_SCIF,
-	.irqs		= { evt2irq(0x700),
-			    evt2irq(0x720),
-			    evt2irq(0x760),
-			    evt2irq(0x740) },
 	.regtype	= SCIx_SH4_SCIF_FIFODATA_REGTYPE,
 };
 
+static struct resource scif0_resources[] = {
+	DEFINE_RES_MEM(0xffea0000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0x700)),
+	DEFINE_RES_IRQ(evt2irq(0x720)),
+	DEFINE_RES_IRQ(evt2irq(0x760)),
+	DEFINE_RES_IRQ(evt2irq(0x740)),
+};
+
 static struct platform_device scif0_device = {
 	.name		= "sh-sci",
 	.id		= 0,
+	.resource	= scif0_resources,
+	.num_resources	= ARRAY_SIZE(scif0_resources),
 	.dev		= {
 		.platform_data	= &scif0_platform_data,
 	},
@@ -52,90 +57,124 @@ static struct platform_device scif0_device = {
  * The rest of these all have multiplexed IRQs
  */
 static struct plat_sci_port scif1_platform_data = {
-	.mapbase	= 0xffeb0000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE | SCSCR_CKE1,
 	.scbrr_algo_id	= SCBRR_ALGO_1,
 	.type		= PORT_SCIF,
-	.irqs		= SCIx_IRQ_MUXED(evt2irq(0x780)),
 	.regtype	= SCIx_SH4_SCIF_FIFODATA_REGTYPE,
 };
 
+static struct resource scif1_resources[] = {
+	DEFINE_RES_MEM(0xffeb0000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0x780)),
+};
+
+static struct resource scif1_demux_resources[] = {
+	DEFINE_RES_MEM(0xffeb0000, 0x100),
+	/* Placeholders, see sh7786_devices_setup() */
+	DEFINE_RES_IRQ(0),
+	DEFINE_RES_IRQ(0),
+	DEFINE_RES_IRQ(0),
+	DEFINE_RES_IRQ(0),
+};
+
 static struct platform_device scif1_device = {
 	.name		= "sh-sci",
 	.id		= 1,
+	.resource	= scif1_resources,
+	.num_resources	= ARRAY_SIZE(scif1_resources),
 	.dev		= {
 		.platform_data	= &scif1_platform_data,
 	},
 };
 
 static struct plat_sci_port scif2_platform_data = {
-	.mapbase	= 0xffec0000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE | SCSCR_CKE1,
 	.scbrr_algo_id	= SCBRR_ALGO_1,
 	.type		= PORT_SCIF,
-	.irqs		= SCIx_IRQ_MUXED(evt2irq(0x840)),
 	.regtype	= SCIx_SH4_SCIF_FIFODATA_REGTYPE,
 };
 
+static struct resource scif2_resources[] = {
+	DEFINE_RES_MEM(0xffec0000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0x840)),
+};
+
 static struct platform_device scif2_device = {
 	.name		= "sh-sci",
 	.id		= 2,
+	.resource	= scif2_resources,
+	.num_resources	= ARRAY_SIZE(scif2_resources),
 	.dev		= {
 		.platform_data	= &scif2_platform_data,
 	},
 };
 
 static struct plat_sci_port scif3_platform_data = {
-	.mapbase	= 0xffed0000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE | SCSCR_CKE1,
 	.scbrr_algo_id	= SCBRR_ALGO_1,
 	.type		= PORT_SCIF,
-	.irqs		= SCIx_IRQ_MUXED(evt2irq(0x860)),
 	.regtype	= SCIx_SH4_SCIF_FIFODATA_REGTYPE,
 };
 
+static struct resource scif3_resources[] = {
+	DEFINE_RES_MEM(0xffed0000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0x860)),
+};
+
 static struct platform_device scif3_device = {
 	.name		= "sh-sci",
 	.id		= 3,
+	.resource	= scif3_resources,
+	.num_resources	= ARRAY_SIZE(scif3_resources),
 	.dev		= {
 		.platform_data	= &scif3_platform_data,
 	},
 };
 
 static struct plat_sci_port scif4_platform_data = {
-	.mapbase	= 0xffee0000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE | SCSCR_CKE1,
 	.scbrr_algo_id	= SCBRR_ALGO_1,
 	.type		= PORT_SCIF,
-	.irqs		= SCIx_IRQ_MUXED(evt2irq(0x880)),
 	.regtype	= SCIx_SH4_SCIF_FIFODATA_REGTYPE,
 };
 
+static struct resource scif4_resources[] = {
+	DEFINE_RES_MEM(0xffee0000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0x880)),
+};
+
 static struct platform_device scif4_device = {
 	.name		= "sh-sci",
 	.id		= 4,
+	.resource	= scif4_resources,
+	.num_resources	= ARRAY_SIZE(scif4_resources),
 	.dev		= {
 		.platform_data	= &scif4_platform_data,
 	},
 };
 
 static struct plat_sci_port scif5_platform_data = {
-	.mapbase	= 0xffef0000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE | SCSCR_CKE1,
 	.scbrr_algo_id	= SCBRR_ALGO_1,
 	.type		= PORT_SCIF,
-	.irqs		= SCIx_IRQ_MUXED(evt2irq(0x8a0)),
 	.regtype	= SCIx_SH4_SCIF_FIFODATA_REGTYPE,
 };
 
+static struct resource scif5_resources[] = {
+	DEFINE_RES_MEM(0xffef0000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0x8a0)),
+};
+
 static struct platform_device scif5_device = {
 	.name		= "sh-sci",
 	.id		= 5,
+	.resource	= scif5_resources,
+	.num_resources	= ARRAY_SIZE(scif5_resources),
 	.dev		= {
 		.platform_data	= &scif5_platform_data,
 	},
@@ -1037,13 +1076,16 @@ static int __init sh7786_devices_setup(void)
 	 */
 	irq = intc_irq_lookup(sh7786_intc_desc.name, TXI1);
 	if (irq > 0) {
-		scif1_platform_data.irqs[SCIx_TXI_IRQ] = irq;
-		scif1_platform_data.irqs[SCIx_ERI_IRQ] +		scif1_demux_resources[1].start  			intc_irq_lookup(sh7786_intc_desc.name, ERI1);
-		scif1_platform_data.irqs[SCIx_BRI_IRQ] -			intc_irq_lookup(sh7786_intc_desc.name, BRI1);
-		scif1_platform_data.irqs[SCIx_RXI_IRQ] +		scif1_demux_resources[2].start  			intc_irq_lookup(sh7786_intc_desc.name, RXI1);
+		scif1_demux_resources[3].start = irq;
+		scif1_demux_resources[4].start +			intc_irq_lookup(sh7786_intc_desc.name, BRI1);
+
+		scif1_device.resource = scif1_demux_resources;
+		scif1_device.num_resources = ARRAY_SIZE(scif1_demux_resources);
 	}
 
 	ret = platform_add_devices(sh7786_early_devices,
diff --git a/arch/sh/kernel/cpu/sh4a/setup-shx3.c b/arch/sh/kernel/cpu/sh4a/setup-shx3.c
index 688f7ed..4d65be9 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-shx3.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-shx3.c
@@ -28,60 +28,75 @@
  * all rather than adding infrastructure to hack around it.
  */
 static struct plat_sci_port scif0_platform_data = {
-	.mapbase	= 0xffc30000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
-	.irqs		= { evt2irq(0x700),
-			    evt2irq(0x720),
-			    evt2irq(0x760),
-			    evt2irq(0x740) },
+};
+
+static struct resource scif0_resources[] = {
+	DEFINE_RES_MEM(0xffc30000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0x700)),
+	DEFINE_RES_IRQ(evt2irq(0x720)),
+	DEFINE_RES_IRQ(evt2irq(0x760)),
+	DEFINE_RES_IRQ(evt2irq(0x740)),
 };
 
 static struct platform_device scif0_device = {
 	.name		= "sh-sci",
 	.id		= 0,
+	.resource	= scif0_resources,
+	.num_resources	= ARRAY_SIZE(scif0_resources),
 	.dev		= {
 		.platform_data	= &scif0_platform_data,
 	},
 };
 
 static struct plat_sci_port scif1_platform_data = {
-	.mapbase	= 0xffc40000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
-	.irqs		= { evt2irq(0x780),
-			    evt2irq(0x7a0),
-			    evt2irq(0x7e0),
-			    evt2irq(0x7c0) },
+};
+
+static struct resource scif1_resources[] = {
+	DEFINE_RES_MEM(0xffc40000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0x780)),
+	DEFINE_RES_IRQ(evt2irq(0x7a0)),
+	DEFINE_RES_IRQ(evt2irq(0x7e0)),
+	DEFINE_RES_IRQ(evt2irq(0x7c0)),
 };
 
 static struct platform_device scif1_device = {
 	.name		= "sh-sci",
 	.id		= 1,
+	.resource	= scif1_resources,
+	.num_resources	= ARRAY_SIZE(scif1_resources),
 	.dev		= {
 		.platform_data	= &scif1_platform_data,
 	},
 };
 
 static struct plat_sci_port scif2_platform_data = {
-	.mapbase	= 0xffc60000,
 	.flags		= UPF_BOOT_AUTOCONF,
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
-	.irqs		= { evt2irq(0x880),
-			    evt2irq(0x8a0),
-			    evt2irq(0x8e0),
-			    evt2irq(0x8c0) },
+};
+
+static struct resource scif2_resources[] = {
+	DEFINE_RES_MEM(0xffc60000, 0x100),
+	DEFINE_RES_IRQ(evt2irq(0x880)),
+	DEFINE_RES_IRQ(evt2irq(0x8a0)),
+	DEFINE_RES_IRQ(evt2irq(0x8e0)),
+	DEFINE_RES_IRQ(evt2irq(0x8c0)),
 };
 
 static struct platform_device scif2_device = {
 	.name		= "sh-sci",
 	.id		= 2,
+	.resource	= scif2_resources,
+	.num_resources	= ARRAY_SIZE(scif2_resources),
 	.dev		= {
 		.platform_data	= &scif2_platform_data,
 	},
diff --git a/arch/sh/kernel/cpu/sh5/setup-sh5.c b/arch/sh/kernel/cpu/sh5/setup-sh5.c
index 18419f1..64b0981 100644
--- a/arch/sh/kernel/cpu/sh5/setup-sh5.c
+++ b/arch/sh/kernel/cpu/sh5/setup-sh5.c
@@ -17,17 +17,24 @@
 #include <asm/addrspace.h>
 
 static struct plat_sci_port scif0_platform_data = {
-	.mapbase	= PHYS_PERIPHERAL_BLOCK + 0x01030000,
 	.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,
 	.scscr		= SCSCR_RE | SCSCR_TE | SCSCR_REIE,
 	.scbrr_algo_id	= SCBRR_ALGO_2,
 	.type		= PORT_SCIF,
-	.irqs		= { 39, 40, 42, 0 },
+};
+
+static struct resource scif0_resources[] = {
+	DEFINE_RES_MEM(PHYS_PERIPHERAL_BLOCK + 0x01030000, 0x100),
+	DEFINE_RES_IRQ(39),
+	DEFINE_RES_IRQ(40),
+	DEFINE_RES_IRQ(42),
 };
 
 static struct platform_device scif0_device = {
 	.name		= "sh-sci",
 	.id		= 0,
+	.resource	= scif0_resources,
+	.num_resources	= ARRAY_SIZE(scif0_resources),
 	.dev		= {
 		.platform_data	= &scif0_platform_data,
 	},
-- 
1.8.3.2

[PATCH v3 27/29] serial: sh-sci: Remove platform data mapbase and irqs fields

[Laurent Pinchart]

The fields are not used anymore by board files, remove them.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 drivers/tty/serial/sh-sci.c | 60 +++++++++++++++++++++++++--------------------
 include/linux/serial_sci.h  | 26 --------------------
 2 files changed, 34 insertions(+), 52 deletions(-)

diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index c5abe5c..6bb1e8f 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -59,6 +59,23 @@
 
 #include "sh-sci.h"
 
+/* Offsets into the sci_port->irqs array */
+enum {
+	SCIx_ERI_IRQ,
+	SCIx_RXI_IRQ,
+	SCIx_TXI_IRQ,
+	SCIx_BRI_IRQ,
+	SCIx_NR_IRQS,
+
+	SCIx_MUX_IRQ = SCIx_NR_IRQS,	/* special case */
+};
+
+#define SCIx_IRQ_IS_MUXED(port)			\
+	((port)->irqs[SCIx_ERI_IRQ] =	\
+	 (port)->irqs[SCIx_RXI_IRQ]) ||	\
+	((port)->irqs[SCIx_ERI_IRQ] &&	\
+	 ((port)->irqs[SCIx_RXI_IRQ] < 0))
+
 struct sci_port {
 	struct uart_port	port;
 
@@ -2160,36 +2177,27 @@ static int sci_init_single(struct platform_device *dev,
 	port->iotype	= UPIO_MEM;
 	port->line	= index;
 
-	if (dev->num_resources) {
-		/* Device has resources, use them. */
-		res = platform_get_resource(dev, IORESOURCE_MEM, 0);
-		if (res = NULL)
-			return -ENOMEM;
+	res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	if (res = NULL)
+		return -ENOMEM;
 
-		port->mapbase = res->start;
+	port->mapbase = res->start;
 
-		for (i = 0; i < ARRAY_SIZE(sci_port->irqs); ++i)
-			sci_port->irqs[i] = platform_get_irq(dev, i);
+	for (i = 0; i < ARRAY_SIZE(sci_port->irqs); ++i)
+		sci_port->irqs[i] = platform_get_irq(dev, i);
 
-		/* The SCI generates several interrupts. They can be muxed
-		 * together or connected to different interrupt lines. In the
-		 * muxed case only one interrupt resource is specified. In the
-		 * non-muxed case three or four interrupt resources are
-		 * specified, as the BRI interrupt is optional.
-		 */
-		if (sci_port->irqs[0] < 0)
-			return -ENXIO;
+	/* The SCI generates several interrupts. They can be muxed together or
+	 * connected to different interrupt lines. In the muxed case only one
+	 * interrupt resource is specified. In the non-muxed case three or four
+	 * interrupt resources are specified, as the BRI interrupt is optional.
+	 */
+	if (sci_port->irqs[0] < 0)
+		return -ENXIO;
 
-		if (sci_port->irqs[1] < 0) {
-			sci_port->irqs[1] = sci_port->irqs[0];
-			sci_port->irqs[2] = sci_port->irqs[0];
-			sci_port->irqs[3] = sci_port->irqs[0];
-		}
-	} else {
-		/* No resources, use old-style platform data. */
-		port->mapbase = p->mapbase;
-		for (i = 0; i < ARRAY_SIZE(sci_port->irqs); ++i)
-			sci_port->irqs[i] = p->irqs[i] ? p->irqs[i] : -ENXIO;
+	if (sci_port->irqs[1] < 0) {
+		sci_port->irqs[1] = sci_port->irqs[0];
+		sci_port->irqs[2] = sci_port->irqs[0];
+		sci_port->irqs[3] = sci_port->irqs[0];
 	}
 
 	switch (p->type) {
diff --git a/include/linux/serial_sci.h b/include/linux/serial_sci.h
index 68cf0bf..620cb57 100644
--- a/include/linux/serial_sci.h
+++ b/include/linux/serial_sci.h
@@ -58,17 +58,6 @@ enum {
 /* HSSRR HSCIF */
 #define HSCIF_SRE	0x8000
 
-/* Offsets into the sci_port->irqs array */
-enum {
-	SCIx_ERI_IRQ,
-	SCIx_RXI_IRQ,
-	SCIx_TXI_IRQ,
-	SCIx_BRI_IRQ,
-	SCIx_NR_IRQS,
-
-	SCIx_MUX_IRQ = SCIx_NR_IRQS,	/* special case */
-};
-
 /* Offsets into the sci_port->gpios array */
 enum {
 	SCIx_SCK,
@@ -98,19 +87,6 @@ enum {
 	SCIx_NR_REGTYPES,
 };
 
-#define SCIx_IRQ_MUXED(irq)		\
-{					\
-	[SCIx_ERI_IRQ]	= (irq),	\
-	[SCIx_RXI_IRQ]	= (irq),	\
-	[SCIx_TXI_IRQ]	= (irq),	\
-	[SCIx_BRI_IRQ]	= (irq),	\
-}
-
-#define SCIx_IRQ_IS_MUXED(port)			\
-	((port)->irqs[SCIx_ERI_IRQ] =	\
-	 (port)->irqs[SCIx_RXI_IRQ]) ||	\
-	((port)->irqs[SCIx_ERI_IRQ] &&	\
-	 ((port)->irqs[SCIx_RXI_IRQ] < 0))
 /*
  * SCI register subset common for all port types.
  * Not all registers will exist on all parts.
@@ -139,8 +115,6 @@ struct plat_sci_port_ops {
  * Platform device specific platform_data struct
  */
 struct plat_sci_port {
-	unsigned long	mapbase;		/* resource base */
-	unsigned int	irqs[SCIx_NR_IRQS];	/* ERI, RXI, TXI, BRI */
 	unsigned int	gpios[SCIx_NR_FNS];	/* SCK, RXD, TXD, CTS, RTS */
 	unsigned int	type;			/* SCI / SCIF / IRDA / HSCIF */
 	upf_t		flags;			/* UPF_* flags */
-- 
1.8.3.2

[PATCH v3 28/29] serial: sh-sci: Add device tree bindings documentation

[Laurent Pinchart]

Document the device tree bindings for the sci serial port devices.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
---
 .../bindings/serial/renesas,sci-serial.txt         | 46 ++++++++++++++++++++++
 1 file changed, 46 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/serial/renesas,sci-serial.txt

diff --git a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
new file mode 100644
index 0000000..f372cf2
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
@@ -0,0 +1,46 @@
+* Renesas SH-Mobile Serial Communication Interface
+
+Required properties:
+
+  - compatible: Must contain one of the following:
+
+    - "renesas,scif-r8a7790" for R8A7790 (R-Car H2) SCIF compatible UART.
+    - "renesas,scifa-r8a7790" for R8A7790 (R-Car H2) SCIFA compatible UART.
+    - "renesas,scifb-r8a7790" for R8A7790 (R-Car H2) SCIFB compatible UART.
+    - "renesas,hscif-r8a7790" for R8A7790 (R-Car H2) HSCIF compatible UART.
+    - "renesas,scif-r8a7791" for R8A7791 (R-Car M2) SCIF compatible UART.
+    - "renesas,scifa-r8a7791" for R8A7791 (R-Car M2) SCIFA compatible UART.
+    - "renesas,scifb-r8a7791" for R8A7791 (R-Car M2) SCIFB compatible UART.
+    - "renesas,hscif-r8a7791" for R8A7791 (R-Car M2) HSCIF compatible UART.
+    - "renesas,scif" for generic SCIF compatible UART.
+    - "renesas,scifa" for generic SCIFA compatible UART.
+    - "renesas,scifb" for generic SCIFB compatible UART.
+    - "renesas,hscif" for generic HSCIF compatible UART.
+
+    When compatible with the generic version, nodes must list the
+    SoC-specific version corresponding to the platform first followed by the
+    generic version.
+
+  - reg: Base address and length of the I/O registers used by the UART.
+  - interrupts: Must contain an interrupt-specifier for the SCIx interrupt.
+
+  - clocks: Must contain a phandle and clock-specifier pair for each entry
+    in clock-names.
+  - clock-names: Must contain "sci_ick" for the SCIx UART interface clock.
+
+Note: Each enabled SCIx UART should have an alias correctly numbered in the
+"aliases" node.
+
+Example:
+	aliases {
+		serial0 = &scifa0;
+	};
+
+	scifa0: serial@e6c40000 {
+		compatible = "renesas,scifa-r8a7790", "renesas,scifa-generic";
+		reg = <0 0xe6c40000 0 64>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7790_CLK_SCIFA0>;
+		clock-names = "sci_ick";
+	};
-- 
1.8.3.2

[PATCH v3 29/29] serial: sh-sci: Add OF support

[Laurent Pinchart]

From: Bastian Hecht <hechtb@gmail.com>

Extend the driver to with support for SCIx device tree bindings. A
minimal set of features is supported, additional properties can be added
later should the need to describe more device features arise.

Signed-off-by: Bastian Hecht <hechtb+renesas@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
---
 drivers/tty/serial/sh-sci.c | 107 ++++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 104 insertions(+), 3 deletions(-)

diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 6bb1e8f..a3b7266 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -40,6 +40,7 @@
 #include <linux/module.h>
 #include <linux/mm.h>
 #include <linux/notifier.h>
+#include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/scatterlist.h>
@@ -2472,6 +2473,89 @@ static int sci_remove(struct platform_device *dev)
 	return 0;
 }
 
+struct sci_port_info {
+	unsigned int type;
+	unsigned int regtype;
+	unsigned int brr_algo;
+};
+
+static const struct of_device_id of_sci_match[] = {
+	{
+		.compatible = "renesas,scif",
+		.data = (void *)&(const struct sci_port_info) {
+			.type = PORT_SCIF,
+			.regtype = SCIx_SH4_SCIF_REGTYPE,
+			.brr_algo = SCBRR_ALGO_2,
+		},
+	}, {
+		.compatible = "renesas,scifa",
+		.data = (void *)&(const struct sci_port_info) {
+			.type = PORT_SCIFA,
+			.regtype = SCIx_SCIFA_REGTYPE,
+			.brr_algo = SCBRR_ALGO_4,
+		},
+	}, {
+		.compatible = "renesas,scifb",
+		.data = (void *)&(const struct sci_port_info) {
+			.type = PORT_SCIFB,
+			.regtype = SCIx_SCIFB_REGTYPE,
+			.brr_algo = SCBRR_ALGO_4,
+		},
+	}, {
+		.compatible = "renesas,hscif",
+		.data = (void *)&(const struct sci_port_info) {
+			.type = PORT_HSCIF,
+			.regtype = SCIx_HSCIF_REGTYPE,
+			.brr_algo = SCBRR_ALGO_6,
+		},
+	}, {
+		/* Terminator */
+	},
+};
+MODULE_DEVICE_TABLE(of, of_sci_match);
+
+static struct plat_sci_port *
+sci_parse_dt(struct platform_device *pdev, unsigned int *dev_id)
+{
+	struct device_node *np = pdev->dev.of_node;
+	const struct of_device_id *match;
+	const struct sci_port_info *info;
+	struct plat_sci_port *p;
+	int id;
+
+	if (!IS_ENABLED(CONFIG_OF) || !np)
+		return NULL;
+
+	match = of_match_node(of_sci_match, pdev->dev.of_node);
+	if (!match)
+		return NULL;
+
+	info = match->data;
+
+	p = devm_kzalloc(&pdev->dev, sizeof(struct plat_sci_port), GFP_KERNEL);
+	if (!p) {
+		dev_err(&pdev->dev, "failed to allocate DT config data\n");
+		return NULL;
+	}
+
+	/* Get the line number for the aliases node. */
+	id = of_alias_get_id(np, "serial");
+	if (id < 0) {
+		dev_err(&pdev->dev, "failed to get alias id (%d)\n", id);
+		return NULL;
+	}
+
+	*dev_id = id;
+
+	p->flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF;
+	p->type = info->type;
+	p->regtype = info->regtype;
+	p->scscr = SCSCR_RE | SCSCR_TE;
+	p->scbrr_algo_id = info->brr_algo;
+
+	return p;
+}
+
 static int sci_probe_single(struct platform_device *dev,
 				      unsigned int index,
 				      struct plat_sci_port *p,
@@ -2504,8 +2588,9 @@ static int sci_probe_single(struct platform_device *dev,
 
 static int sci_probe(struct platform_device *dev)
 {
-	struct plat_sci_port *p = dev_get_platdata(&dev->dev);
-	struct sci_port *sp = &sci_ports[dev->id];
+	struct plat_sci_port *p;
+	struct sci_port *sp;
+	unsigned int dev_id;
 	int ret;
 
 	/*
@@ -2516,9 +2601,24 @@ static int sci_probe(struct platform_device *dev)
 	if (is_early_platform_device(dev))
 		return sci_probe_earlyprintk(dev);
 
+	if (dev->dev.of_node) {
+		p = sci_parse_dt(dev, &dev_id);
+		if (p = NULL)
+			return -EINVAL;
+	} else {
+		p = dev->dev.platform_data;
+		if (p = NULL) {
+			dev_err(&dev->dev, "no platform data supplied\n");
+			return -EINVAL;
+		}
+
+		dev_id = dev->id;
+	}
+
+	sp = &sci_ports[dev_id];
 	platform_set_drvdata(dev, sp);
 
-	ret = sci_probe_single(dev, dev->id, p, sp);
+	ret = sci_probe_single(dev, dev_id, p, sp);
 	if (ret)
 		return ret;
 
@@ -2570,6 +2670,7 @@ static struct platform_driver sci_driver = {
 		.name	= "sh-sci",
 		.owner	= THIS_MODULE,
 		.pm	= &sci_dev_pm_ops,
+		.of_match_table = of_match_ptr(of_sci_match),
 	},
 };
 
-- 
1.8.3.2

Re: [PATCH v3 00/29] Add OF support to the sh-sci serial port driver

[Simon Horman]

On Tue, Nov 19, 2013 at 03:02:01PM +0100, Laurent Pinchart wrote:
> Hello,
> 
> This is the third version of the patch set adds device tree bindings for the
> sh sci serial port devices and adds OF parsing to the sh-sci driver.
> 
> The bindings are based on Bastian Hecht's proposal (see
> http://www.spinics.net/lists/arm-kernel/msg228129.html). The approach taken
> here is more minimalistic: instead of describing all hardware characteristics
> that vary between the SCI device revisions in DT (such as registers layout),
> that information is stored in the driver and selected based on the compatible
> property value. Only SCI revisions used on ARM devices are supported through
> DT, as DT support for SuperH is nowhere down the line.
> 
> Patches 01/29 to 06/29 clean up the sh-sci driver. Patches 07/29 to 27/29
> replace memory and interrupt resources passed through platform data with
> platform resources. Beside replacing a custom mechanism with a standard one,
> it will also make the DT parsing code simpler as resource allocation will be
> shared between DT and non-DT code paths. Finally, patches 28/29 to 29/29 add
> OF parsing to the sh-sci driver and create DT bindings documentation.
> 
> The patches have been test on a Lager board (r8a7790-based) and a Koelsch board
> (r8a7791-based). Support for other SoCs will be added as needed. Note that all
> current Renesas ARM SoCs seem to be compatible with the generic (H)SCI(F)(AB)
> devices, but the plan is for their DT bindings to list the SoC-specific version
> in case incompatibilities are found later.
> 
> The series will need to be split in three parts to go to mainline. Patches
> 01/29 to 07/29 should go through Greg's tree, patches 08/29 to 26/29 through
> Simon's tree, and patches 27/29 to 29/29 through Greg's tree again. Greg, when
> applying the first seven patches, could you please provide a stable branch for
> Simon to base his branch on (I can send you a pull request rebased on top of
> v3.13-rc1 if that can help) ? Simon will in turn provide a stable branch to
> base the last three patches on.

Perhaps you meant to CC Greg?

> 
> Changes compared to v2:
> 
> - Fix indentation in 12/29
> - Remove interrupt-parent property from the DT bindings documentation
> - Remove -generic suffix from DT compatible values
> - Reword the DT bindings documentation based on comments received on v2
> - Added r8a7791 support to the DT bindings
> 
> Changes compared to v1:
> 
> - Patches 04/29 to 27/29 have been added
> - Multi-interrupt support has been removed from the DT bindings as they don't
>   support any SoC requiring multi-interrupt yet
> 
> Cc: devicetree@vger.kernel.org
> 
> Bastian Hecht (1):
>   serial: sh-sci: Add OF support
> 
> Laurent Pinchart (28):
>   serial: sh-sci: Sort headers alphabetically
>   serial: sh-sci: Remove baud rate calculation algorithm 5
>   serial: sh-sci: Simplify baud rate calculation algorithms
>   serial: sh-sci: Remove duplicate interrupt check in verify port op
>   serial: sh-sci: Set the UPF_FIXED_PORT flag
>   serial: sh-sci: Don't check IRQ in verify port operation
>   serial: sh-sci: Support resources passed through platform resources
>   ARM: shmobile: sh7372: Use macros to declare SCIF devices
>   ARM: shmobile: sh73a0: Use macros to declare SCIF devices
>   ARM: shmobile: r8a7740: Use macros to declare SCIF devices
>   ARM: shmobile: r8a7779: Use macros to declare SCIF devices
>   ARM: shmobile: r7s72100: Don't define SCIF platform data in an array
>   ARM: shmobile: r8a73a4: Don't define SCIF platform data in an array
>   ARM: shmobile: r8a7778: Don't define SCIF platform data in an array
>   ARM: shmobile: r8a7790: Don't define SCIF platform data in an array
>   ARM: shmobile: r8a7791: Don't define SCIF platform data in an array
>   ARM: shmobile: sh7372: Declare SCIF register base and IRQ as resources
>   ARM: shmobile: sh73a0: Declare SCIF register base and IRQ as resources
>   ARM: shmobile: r7s72100: Declare SCIF register base and IRQ as
>     resources
>   ARM: shmobile: r8a73a4: Declare SCIF register base and IRQ as
>     resources
>   ARM: shmobile: r8a7740: Declare SCIF register base and IRQ as
>     resources
>   ARM: shmobile: r8a7778: Declare SCIF register base and IRQ as
>     resources
>   ARM: shmobile: r8a7779: Declare SCIF register base and IRQ as
>     resources
>   ARM: shmobile: r8a7790: Declare SCIF register base and IRQ as
>     resources
>   ARM: shmobile: r8a7791: Declare SCIF register base and IRQ as
>     resources
>   sh: Declare SCIF register base and IRQ as resources
>   serial: sh-sci: Remove platform data mapbase and irqs fields
>   serial: sh-sci: Add device tree bindings documentation
> 
>  .../bindings/serial/renesas,sci-serial.txt         |  46 ++++
>  arch/arm/mach-shmobile/setup-r7s72100.c            |  63 +++---
>  arch/arm/mach-shmobile/setup-r8a73a4.c             |  65 +++---
>  arch/arm/mach-shmobile/setup-r8a7740.c             | 196 +++--------------
>  arch/arm/mach-shmobile/setup-r8a7778.c             |  45 ++--
>  arch/arm/mach-shmobile/setup-r8a7779.c             | 129 +++--------
>  arch/arm/mach-shmobile/setup-r8a7790.c             | 117 +++++-----
>  arch/arm/mach-shmobile/setup-r8a7791.c             | 130 +++++------
>  arch/arm/mach-shmobile/setup-sh7372.c              | 161 +++-----------
>  arch/arm/mach-shmobile/setup-sh73a0.c              | 192 +++--------------
>  arch/sh/kernel/cpu/sh2/setup-sh7619.c              |  27 ++-
>  arch/sh/kernel/cpu/sh2a/setup-mxg.c                |   9 +-
>  arch/sh/kernel/cpu/sh2a/setup-sh7201.c             |  72 +++++--
>  arch/sh/kernel/cpu/sh2a/setup-sh7203.c             |  36 +++-
>  arch/sh/kernel/cpu/sh2a/setup-sh7206.c             |  36 +++-
>  arch/sh/kernel/cpu/sh2a/setup-sh7264.c             |  96 +++++++--
>  arch/sh/kernel/cpu/sh2a/setup-sh7269.c             |  96 +++++++--
>  arch/sh/kernel/cpu/sh3/setup-sh7705.c              |  18 +-
>  arch/sh/kernel/cpu/sh3/setup-sh770x.c              |  27 ++-
>  arch/sh/kernel/cpu/sh3/setup-sh7710.c              |  18 +-
>  arch/sh/kernel/cpu/sh3/setup-sh7720.c              |  18 +-
>  arch/sh/kernel/cpu/sh4/setup-sh4-202.c             |  15 +-
>  arch/sh/kernel/cpu/sh4/setup-sh7750.c              |  18 +-
>  arch/sh/kernel/cpu/sh4/setup-sh7760.c              |  58 +++--
>  arch/sh/kernel/cpu/sh4a/setup-sh7343.c             |  36 +++-
>  arch/sh/kernel/cpu/sh4a/setup-sh7366.c             |   9 +-
>  arch/sh/kernel/cpu/sh4a/setup-sh7722.c             |  27 ++-
>  arch/sh/kernel/cpu/sh4a/setup-sh7723.c             |  54 +++--
>  arch/sh/kernel/cpu/sh4a/setup-sh7724.c             |  54 +++--
>  arch/sh/kernel/cpu/sh4a/setup-sh7734.c             |  66 ++++--
>  arch/sh/kernel/cpu/sh4a/setup-sh7757.c             |  27 ++-
>  arch/sh/kernel/cpu/sh4a/setup-sh7763.c             |  27 ++-
>  arch/sh/kernel/cpu/sh4a/setup-sh7770.c             |  90 ++++++--
>  arch/sh/kernel/cpu/sh4a/setup-sh7780.c             |  18 +-
>  arch/sh/kernel/cpu/sh4a/setup-sh7785.c             |  54 +++--
>  arch/sh/kernel/cpu/sh4a/setup-sh7786.c             |  82 +++++--
>  arch/sh/kernel/cpu/sh4a/setup-shx3.c               |  45 ++--
>  arch/sh/kernel/cpu/sh5/setup-sh5.c                 |  11 +-
>  drivers/tty/serial/sh-sci.c                        | 238 ++++++++++++++++-----
>  include/linux/serial_sci.h                         |  35 +--
>  40 files changed, 1447 insertions(+), 1114 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
> 
> -- 
> Regards,
> 
> Laurent Pinchart
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

Re: [PATCH v3 00/29] Add OF support to the sh-sci serial port driver

[Laurent Pinchart]

Hi Simon (and Greg this time),

On Thursday 21 November 2013 13:40:38 Simon Horman wrote:
> On Tue, Nov 19, 2013 at 03:02:01PM +0100, Laurent Pinchart wrote:
> > Hello,
> > 
> > This is the third version of the patch set adds device tree bindings for
> > the sh sci serial port devices and adds OF parsing to the sh-sci driver.
> > 
> > The bindings are based on Bastian Hecht's proposal (see
> > http://www.spinics.net/lists/arm-kernel/msg228129.html). The approach
> > taken
> > here is more minimalistic: instead of describing all hardware
> > characteristics that vary between the SCI device revisions in DT (such as
> > registers layout), that information is stored in the driver and selected
> > based on the compatible property value. Only SCI revisions used on ARM
> > devices are supported through DT, as DT support for SuperH is nowhere
> > down the line.
> > 
> > Patches 01/29 to 06/29 clean up the sh-sci driver. Patches 07/29 to 27/29
> > replace memory and interrupt resources passed through platform data with
> > platform resources. Beside replacing a custom mechanism with a standard
> > one, it will also make the DT parsing code simpler as resource allocation
> > will be shared between DT and non-DT code paths. Finally, patches 28/29
> > to 29/29 add OF parsing to the sh-sci driver and create DT bindings
> > documentation.
> > 
> > The patches have been test on a Lager board (r8a7790-based) and a Koelsch
> > board (r8a7791-based). Support for other SoCs will be added as needed.
> > Note that all current Renesas ARM SoCs seem to be compatible with the
> > generic (H)SCI(F)(AB) devices, but the plan is for their DT bindings to
> > list the SoC-specific version in case incompatibilities are found later.
> > 
> > The series will need to be split in three parts to go to mainline. Patches
> > 01/29 to 07/29 should go through Greg's tree, patches 08/29 to 26/29
> > through Simon's tree, and patches 27/29 to 29/29 through Greg's tree
> > again. Greg, when applying the first seven patches, could you please
> > provide a stable branch for Simon to base his branch on (I can send you a
> > pull request rebased on top of v3.13-rc1 if that can help) ? Simon will
> > in turn provide a stable branch to base the last three patches on.
> 
> Perhaps you meant to CC Greg?

Indeed :-)

> > Changes compared to v2:
> > 
> > - Fix indentation in 12/29
> > - Remove interrupt-parent property from the DT bindings documentation
> > - Remove -generic suffix from DT compatible values
> > - Reword the DT bindings documentation based on comments received on v2
> > - Added r8a7791 support to the DT bindings
> > 
> > Changes compared to v1:
> > 
> > - Patches 04/29 to 27/29 have been added
> > - Multi-interrupt support has been removed from the DT bindings as they
> > don't> 
> >   support any SoC requiring multi-interrupt yet
> > 
> > Cc: devicetree@vger.kernel.org
> > 
> > Bastian Hecht (1):
> >   serial: sh-sci: Add OF support
> > 
> > Laurent Pinchart (28):
> >   serial: sh-sci: Sort headers alphabetically
> >   serial: sh-sci: Remove baud rate calculation algorithm 5
> >   serial: sh-sci: Simplify baud rate calculation algorithms
> >   serial: sh-sci: Remove duplicate interrupt check in verify port op
> >   serial: sh-sci: Set the UPF_FIXED_PORT flag
> >   serial: sh-sci: Don't check IRQ in verify port operation
> >   serial: sh-sci: Support resources passed through platform resources
> >   ARM: shmobile: sh7372: Use macros to declare SCIF devices
> >   ARM: shmobile: sh73a0: Use macros to declare SCIF devices
> >   ARM: shmobile: r8a7740: Use macros to declare SCIF devices
> >   ARM: shmobile: r8a7779: Use macros to declare SCIF devices
> >   ARM: shmobile: r7s72100: Don't define SCIF platform data in an array
> >   ARM: shmobile: r8a73a4: Don't define SCIF platform data in an array
> >   ARM: shmobile: r8a7778: Don't define SCIF platform data in an array
> >   ARM: shmobile: r8a7790: Don't define SCIF platform data in an array
> >   ARM: shmobile: r8a7791: Don't define SCIF platform data in an array
> >   ARM: shmobile: sh7372: Declare SCIF register base and IRQ as resources
> >   ARM: shmobile: sh73a0: Declare SCIF register base and IRQ as resources
> >   ARM: shmobile: r7s72100: Declare SCIF register base and IRQ as
> >     resources
> >   ARM: shmobile: r8a73a4: Declare SCIF register base and IRQ as
> >     resources
> >   ARM: shmobile: r8a7740: Declare SCIF register base and IRQ as
> >     resources
> >   ARM: shmobile: r8a7778: Declare SCIF register base and IRQ as
> >     resources
> >   ARM: shmobile: r8a7779: Declare SCIF register base and IRQ as
> >     resources
> >   ARM: shmobile: r8a7790: Declare SCIF register base and IRQ as
> >     resources
> >   ARM: shmobile: r8a7791: Declare SCIF register base and IRQ as
> >     resources
> >   sh: Declare SCIF register base and IRQ as resources
> >   serial: sh-sci: Remove platform data mapbase and irqs fields
> >   serial: sh-sci: Add device tree bindings documentation
> >  
> >  .../bindings/serial/renesas,sci-serial.txt         |  46 ++++
> >  arch/arm/mach-shmobile/setup-r7s72100.c            |  63 +++---
> >  arch/arm/mach-shmobile/setup-r8a73a4.c             |  65 +++---
> >  arch/arm/mach-shmobile/setup-r8a7740.c             | 196 +++-------------
> >  arch/arm/mach-shmobile/setup-r8a7778.c             |  45 ++--
> >  arch/arm/mach-shmobile/setup-r8a7779.c             | 129 +++--------
> >  arch/arm/mach-shmobile/setup-r8a7790.c             | 117 +++++-----
> >  arch/arm/mach-shmobile/setup-r8a7791.c             | 130 +++++------
> >  arch/arm/mach-shmobile/setup-sh7372.c              | 161 +++-----------
> >  arch/arm/mach-shmobile/setup-sh73a0.c              | 192 +++-------------
> >  arch/sh/kernel/cpu/sh2/setup-sh7619.c              |  27 ++-
> >  arch/sh/kernel/cpu/sh2a/setup-mxg.c                |   9 +-
> >  arch/sh/kernel/cpu/sh2a/setup-sh7201.c             |  72 +++++--
> >  arch/sh/kernel/cpu/sh2a/setup-sh7203.c             |  36 +++-
> >  arch/sh/kernel/cpu/sh2a/setup-sh7206.c             |  36 +++-
> >  arch/sh/kernel/cpu/sh2a/setup-sh7264.c             |  96 +++++++--
> >  arch/sh/kernel/cpu/sh2a/setup-sh7269.c             |  96 +++++++--
> >  arch/sh/kernel/cpu/sh3/setup-sh7705.c              |  18 +-
> >  arch/sh/kernel/cpu/sh3/setup-sh770x.c              |  27 ++-
> >  arch/sh/kernel/cpu/sh3/setup-sh7710.c              |  18 +-
> >  arch/sh/kernel/cpu/sh3/setup-sh7720.c              |  18 +-
> >  arch/sh/kernel/cpu/sh4/setup-sh4-202.c             |  15 +-
> >  arch/sh/kernel/cpu/sh4/setup-sh7750.c              |  18 +-
> >  arch/sh/kernel/cpu/sh4/setup-sh7760.c              |  58 +++--
> >  arch/sh/kernel/cpu/sh4a/setup-sh7343.c             |  36 +++-
> >  arch/sh/kernel/cpu/sh4a/setup-sh7366.c             |   9 +-
> >  arch/sh/kernel/cpu/sh4a/setup-sh7722.c             |  27 ++-
> >  arch/sh/kernel/cpu/sh4a/setup-sh7723.c             |  54 +++--
> >  arch/sh/kernel/cpu/sh4a/setup-sh7724.c             |  54 +++--
> >  arch/sh/kernel/cpu/sh4a/setup-sh7734.c             |  66 ++++--
> >  arch/sh/kernel/cpu/sh4a/setup-sh7757.c             |  27 ++-
> >  arch/sh/kernel/cpu/sh4a/setup-sh7763.c             |  27 ++-
> >  arch/sh/kernel/cpu/sh4a/setup-sh7770.c             |  90 ++++++--
> >  arch/sh/kernel/cpu/sh4a/setup-sh7780.c             |  18 +-
> >  arch/sh/kernel/cpu/sh4a/setup-sh7785.c             |  54 +++--
> >  arch/sh/kernel/cpu/sh4a/setup-sh7786.c             |  82 +++++--
> >  arch/sh/kernel/cpu/sh4a/setup-shx3.c               |  45 ++--
> >  arch/sh/kernel/cpu/sh5/setup-sh5.c                 |  11 +-
> >  drivers/tty/serial/sh-sci.c                        | 238 ++++++++++++----
> >  include/linux/serial_sci.h                         |  35 +--
> >  40 files changed, 1447 insertions(+), 1114 deletions(-)
> >  create mode 100644
> >  Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
-- 
Regards,

Laurent Pinchart

Re: [PATCH v3 00/29] Add OF support to the sh-sci serial port driver

[Greg KH]

On Thu, Nov 21, 2013 at 08:17:27AM +0100, Laurent Pinchart wrote:
> Hi Simon (and Greg this time),
> 
> On Thursday 21 November 2013 13:40:38 Simon Horman wrote:
> > On Tue, Nov 19, 2013 at 03:02:01PM +0100, Laurent Pinchart wrote:
> > > Hello,
> > > 
> > > This is the third version of the patch set adds device tree bindings for
> > > the sh sci serial port devices and adds OF parsing to the sh-sci driver.
> > > 
> > > The bindings are based on Bastian Hecht's proposal (see
> > > http://www.spinics.net/lists/arm-kernel/msg228129.html). The approach
> > > taken
> > > here is more minimalistic: instead of describing all hardware
> > > characteristics that vary between the SCI device revisions in DT (such as
> > > registers layout), that information is stored in the driver and selected
> > > based on the compatible property value. Only SCI revisions used on ARM
> > > devices are supported through DT, as DT support for SuperH is nowhere
> > > down the line.
> > > 
> > > Patches 01/29 to 06/29 clean up the sh-sci driver. Patches 07/29 to 27/29
> > > replace memory and interrupt resources passed through platform data with
> > > platform resources. Beside replacing a custom mechanism with a standard
> > > one, it will also make the DT parsing code simpler as resource allocation
> > > will be shared between DT and non-DT code paths. Finally, patches 28/29
> > > to 29/29 add OF parsing to the sh-sci driver and create DT bindings
> > > documentation.
> > > 
> > > The patches have been test on a Lager board (r8a7790-based) and a Koelsch
> > > board (r8a7791-based). Support for other SoCs will be added as needed.
> > > Note that all current Renesas ARM SoCs seem to be compatible with the
> > > generic (H)SCI(F)(AB) devices, but the plan is for their DT bindings to
> > > list the SoC-specific version in case incompatibilities are found later.
> > > 
> > > The series will need to be split in three parts to go to mainline. Patches
> > > 01/29 to 07/29 should go through Greg's tree, patches 08/29 to 26/29
> > > through Simon's tree, and patches 27/29 to 29/29 through Greg's tree
> > > again. Greg, when applying the first seven patches, could you please
> > > provide a stable branch for Simon to base his branch on (I can send you a
> > > pull request rebased on top of v3.13-rc1 if that can help) ? Simon will
> > > in turn provide a stable branch to base the last three patches on.
> > 
> > Perhaps you meant to CC Greg?
> 
> Indeed :-)

That's a mess, how about Simon just take all of these in his tree:

Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Re: [PATCH v3 00/29] Add OF support to the sh-sci serial port driver

[Laurent Pinchart]

Hi Greg,

On Tuesday 03 December 2013 10:09:53 Greg KH wrote:
> On Thu, Nov 21, 2013 at 08:17:27AM +0100, Laurent Pinchart wrote:
> > Hi Simon (and Greg this time),
> > On Thursday 21 November 2013 13:40:38 Simon Horman wrote:
> > > On Tue, Nov 19, 2013 at 03:02:01PM +0100, Laurent Pinchart wrote:
> > > > Hello,
> > > > 
> > > > This is the third version of the patch set adds device tree bindings
> > > > for the sh sci serial port devices and adds OF parsing to the sh-sci
> > > > driver.
> > > > 
> > > > The bindings are based on Bastian Hecht's proposal (see
> > > > http://www.spinics.net/lists/arm-kernel/msg228129.html). The approach
> > > > taken here is more minimalistic: instead of describing all hardware
> > > > characteristics that vary between the SCI device revisions in DT (such
> > > > as registers layout), that information is stored in the driver and
> > > > selected based on the compatible property value. Only SCI revisions
> > > > used on ARM devices are supported through DT, as DT support for SuperH
> > > > is nowhere down the line.
> > > > 
> > > > Patches 01/29 to 06/29 clean up the sh-sci driver. Patches 07/29 to
> > > > 27/29 replace memory and interrupt resources passed through platform
> > > > data with platform resources. Beside replacing a custom mechanism with
> > > > a standard one, it will also make the DT parsing code simpler as
> > > > resource allocation will be shared between DT and non-DT code paths.
> > > > Finally, patches 28/29 to 29/29 add OF parsing to the sh-sci driver
> > > > and create DT bindings documentation.
> > > > 
> > > > The patches have been test on a Lager board (r8a7790-based) and a
> > > > Koelsch board (r8a7791-based). Support for other SoCs will be added as
> > > > needed. Note that all current Renesas ARM SoCs seem to be compatible
> > > > with the generic (H)SCI(F)(AB) devices, but the plan is for their DT
> > > > bindings to list the SoC-specific version in case incompatibilities
> > > > are found later.
> > > > 
> > > > The series will need to be split in three parts to go to mainline.
> > > > Patches 01/29 to 07/29 should go through Greg's tree, patches 08/29 to
> > > > 26/29 through Simon's tree, and patches 27/29 to 29/29 through Greg's
> > > > tree again. Greg, when applying the first seven patches, could you
> > > > please provide a stable branch for Simon to base his branch on (I can
> > > > send you a pull request rebased on top of v3.13-rc1 if that can help)
> > > > ? Simon will in turn provide a stable branch to base the last three
> > > > patches on.
> > > 
> > > Perhaps you meant to CC Greg?
> > 
> > Indeed :-)
> 
> That's a mess, how about Simon just take all of these in his tree:

We all seem to agree that it's the best solution, so let's do that. There will 
be a couple of other sh-sci patches for the next kernel version that should 
then go through Simon's tree as well. I will make sure to post them for review 
on the linux-serial list and CC you to get your ack (from what I've been told 
the ARM SoC maintainer usually dislike driver patches going through their tree 
without the driver subsystem maintainer ack).

> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Thank you.

-- 
Regards,

Laurent Pinchart

Re: [PATCH v3 00/29] Add OF support to the sh-sci serial port driver

[Simon Horman]

On Tue, Dec 03, 2013 at 07:28:47PM +0100, Laurent Pinchart wrote:
> Hi Greg,
> 
> On Tuesday 03 December 2013 10:09:53 Greg KH wrote:
> > On Thu, Nov 21, 2013 at 08:17:27AM +0100, Laurent Pinchart wrote:
> > > Hi Simon (and Greg this time),
> > > On Thursday 21 November 2013 13:40:38 Simon Horman wrote:
> > > > On Tue, Nov 19, 2013 at 03:02:01PM +0100, Laurent Pinchart wrote:
> > > > > Hello,
> > > > > 
> > > > > This is the third version of the patch set adds device tree bindings
> > > > > for the sh sci serial port devices and adds OF parsing to the sh-sci
> > > > > driver.
> > > > > 
> > > > > The bindings are based on Bastian Hecht's proposal (see
> > > > > http://www.spinics.net/lists/arm-kernel/msg228129.html). The approach
> > > > > taken here is more minimalistic: instead of describing all hardware
> > > > > characteristics that vary between the SCI device revisions in DT (such
> > > > > as registers layout), that information is stored in the driver and
> > > > > selected based on the compatible property value. Only SCI revisions
> > > > > used on ARM devices are supported through DT, as DT support for SuperH
> > > > > is nowhere down the line.
> > > > > 
> > > > > Patches 01/29 to 06/29 clean up the sh-sci driver. Patches 07/29 to
> > > > > 27/29 replace memory and interrupt resources passed through platform
> > > > > data with platform resources. Beside replacing a custom mechanism with
> > > > > a standard one, it will also make the DT parsing code simpler as
> > > > > resource allocation will be shared between DT and non-DT code paths.
> > > > > Finally, patches 28/29 to 29/29 add OF parsing to the sh-sci driver
> > > > > and create DT bindings documentation.
> > > > > 
> > > > > The patches have been test on a Lager board (r8a7790-based) and a
> > > > > Koelsch board (r8a7791-based). Support for other SoCs will be added as
> > > > > needed. Note that all current Renesas ARM SoCs seem to be compatible
> > > > > with the generic (H)SCI(F)(AB) devices, but the plan is for their DT
> > > > > bindings to list the SoC-specific version in case incompatibilities
> > > > > are found later.
> > > > > 
> > > > > The series will need to be split in three parts to go to mainline.
> > > > > Patches 01/29 to 07/29 should go through Greg's tree, patches 08/29 to
> > > > > 26/29 through Simon's tree, and patches 27/29 to 29/29 through Greg's
> > > > > tree again. Greg, when applying the first seven patches, could you
> > > > > please provide a stable branch for Simon to base his branch on (I can
> > > > > send you a pull request rebased on top of v3.13-rc1 if that can help)
> > > > > ? Simon will in turn provide a stable branch to base the last three
> > > > > patches on.
> > > > 
> > > > Perhaps you meant to CC Greg?
> > > 
> > > Indeed :-)
> > 
> > That's a mess, how about Simon just take all of these in his tree:
> 
> We all seem to agree that it's the best solution, so let's do that. There will 
> be a couple of other sh-sci patches for the next kernel version that should 
> then go through Simon's tree as well. I will make sure to post them for review 
> on the linux-serial list and CC you to get your ack (from what I've been told 
> the ARM SoC maintainer usually dislike driver patches going through their tree 
> without the driver subsystem maintainer ack).
> 
> > Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> 
> Thank you.

Yes, thanks Greg.

Laurent, I have v4 of these patches sitting in patchwork.
Would you like me to look at queuing them up as-is or
are you planning v5?

Re: [PATCH v3 00/29] Add OF support to the sh-sci serial port driver

[Laurent Pinchart]

Hi Simon,

On Thursday 05 December 2013 12:33:23 Simon Horman wrote:
> On Tue, Dec 03, 2013 at 07:28:47PM +0100, Laurent Pinchart wrote:
> > On Tuesday 03 December 2013 10:09:53 Greg KH wrote:
> > > On Thu, Nov 21, 2013 at 08:17:27AM +0100, Laurent Pinchart wrote:
> > > > On Thursday 21 November 2013 13:40:38 Simon Horman wrote:
> > > > > On Tue, Nov 19, 2013 at 03:02:01PM +0100, Laurent Pinchart wrote:
> > > > > > Hello,
> > > > > > 
> > > > > > This is the third version of the patch set adds device tree
> > > > > > bindings for the sh sci serial port devices and adds OF parsing to
> > > > > > the sh-sci driver.
> > > > > > 
> > > > > > The bindings are based on Bastian Hecht's proposal (see
> > > > > > http://www.spinics.net/lists/arm-kernel/msg228129.html). The
> > > > > > approach taken here is more minimalistic: instead of describing
> > > > > > all hardware characteristics that vary between the SCI device
> > > > > > revisions in DT (such as registers layout), that information is
> > > > > > stored in the driver and selected based on the compatible property
> > > > > > value. Only SCI revisions used on ARM devices are supported
> > > > > > through DT, as DT support for SuperH is nowhere down the line.
> > > > > > 
> > > > > > Patches 01/29 to 06/29 clean up the sh-sci driver. Patches 07/29
> > > > > > to 27/29 replace memory and interrupt resources passed through
> > > > > > platform data with platform resources. Beside replacing a custom
> > > > > > mechanism with a standard one, it will also make the DT parsing
> > > > > > code simpler as resource allocation will be shared between DT and
> > > > > > non-DT code paths. Finally, patches 28/29 to 29/29 add OF parsing
> > > > > > to the sh-sci driver and create DT bindings documentation.
> > > > > > 
> > > > > > The patches have been test on a Lager board (r8a7790-based) and a
> > > > > > Koelsch board (r8a7791-based). Support for other SoCs will be
> > > > > > added as needed. Note that all current Renesas ARM SoCs seem to be
> > > > > > compatible with the generic (H)SCI(F)(AB) devices, but the plan is
> > > > > > for their DT bindings to list the SoC-specific version in case
> > > > > > incompatibilities are found later.
> > > > > > 
> > > > > > The series will need to be split in three parts to go to mainline.
> > > > > > Patches 01/29 to 07/29 should go through Greg's tree, patches
> > > > > > 08/29 to 26/29 through Simon's tree, and patches 27/29 to 29/29
> > > > > > through Greg's tree again. Greg, when applying the first seven
> > > > > > patches, could you please provide a stable branch for Simon to
> > > > > > base his branch on (I can send you a pull request rebased on top
> > > > > > of v3.13-rc1 if that can help) ? Simon will in turn provide a
> > > > > > stable branch to base the last three patches on.
> > > > > 
> > > > > Perhaps you meant to CC Greg?
> > > > 
> > > > Indeed :-)
> > > 
> > > That's a mess, how about Simon just take all of these in his tree:
> >
> > We all seem to agree that it's the best solution, so let's do that. There
> > will be a couple of other sh-sci patches for the next kernel version that
> > should then go through Simon's tree as well. I will make sure to post
> > them for review on the linux-serial list and CC you to get your ack (from
> > what I've been told the ARM SoC maintainer usually dislike driver patches
> > going through their tree without the driver subsystem maintainer ack).
> > 
> > > Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> > 
> > Thank you.
> 
> Yes, thanks Greg.
> 
> Laurent, I have v4 of these patches sitting in patchwork.
> Would you like me to look at queuing them up as-is or
> are you planning v5?

I'm not planning for a v5, but there's another patch series ("[PATCH 00/16] 
sh-sci: Remove unnecessary fields from platform data") that is similarly 
organized as sh-sci / platform / sh-sci patches on top of this. Would you like 
me to reorganize the all the 45 patches in one big series with a single set of 
platform patches in-between two sets of sh-sci patches ?

-- 
Regards,

Laurent Pinchart

Re: [PATCH v3 00/29] Add OF support to the sh-sci serial port driver

[Simon Horman]

On Thu, Dec 05, 2013 at 06:53:41AM +0100, Laurent Pinchart wrote:
> Hi Simon,
> 
> On Thursday 05 December 2013 12:33:23 Simon Horman wrote:
> > On Tue, Dec 03, 2013 at 07:28:47PM +0100, Laurent Pinchart wrote:
> > > On Tuesday 03 December 2013 10:09:53 Greg KH wrote:
> > > > On Thu, Nov 21, 2013 at 08:17:27AM +0100, Laurent Pinchart wrote:
> > > > > On Thursday 21 November 2013 13:40:38 Simon Horman wrote:
> > > > > > On Tue, Nov 19, 2013 at 03:02:01PM +0100, Laurent Pinchart wrote:
> > > > > > > Hello,
> > > > > > > 
> > > > > > > This is the third version of the patch set adds device tree
> > > > > > > bindings for the sh sci serial port devices and adds OF parsing to
> > > > > > > the sh-sci driver.
> > > > > > > 
> > > > > > > The bindings are based on Bastian Hecht's proposal (see
> > > > > > > http://www.spinics.net/lists/arm-kernel/msg228129.html). The
> > > > > > > approach taken here is more minimalistic: instead of describing
> > > > > > > all hardware characteristics that vary between the SCI device
> > > > > > > revisions in DT (such as registers layout), that information is
> > > > > > > stored in the driver and selected based on the compatible property
> > > > > > > value. Only SCI revisions used on ARM devices are supported
> > > > > > > through DT, as DT support for SuperH is nowhere down the line.
> > > > > > > 
> > > > > > > Patches 01/29 to 06/29 clean up the sh-sci driver. Patches 07/29
> > > > > > > to 27/29 replace memory and interrupt resources passed through
> > > > > > > platform data with platform resources. Beside replacing a custom
> > > > > > > mechanism with a standard one, it will also make the DT parsing
> > > > > > > code simpler as resource allocation will be shared between DT and
> > > > > > > non-DT code paths. Finally, patches 28/29 to 29/29 add OF parsing
> > > > > > > to the sh-sci driver and create DT bindings documentation.
> > > > > > > 
> > > > > > > The patches have been test on a Lager board (r8a7790-based) and a
> > > > > > > Koelsch board (r8a7791-based). Support for other SoCs will be
> > > > > > > added as needed. Note that all current Renesas ARM SoCs seem to be
> > > > > > > compatible with the generic (H)SCI(F)(AB) devices, but the plan is
> > > > > > > for their DT bindings to list the SoC-specific version in case
> > > > > > > incompatibilities are found later.
> > > > > > > 
> > > > > > > The series will need to be split in three parts to go to mainline.
> > > > > > > Patches 01/29 to 07/29 should go through Greg's tree, patches
> > > > > > > 08/29 to 26/29 through Simon's tree, and patches 27/29 to 29/29
> > > > > > > through Greg's tree again. Greg, when applying the first seven
> > > > > > > patches, could you please provide a stable branch for Simon to
> > > > > > > base his branch on (I can send you a pull request rebased on top
> > > > > > > of v3.13-rc1 if that can help) ? Simon will in turn provide a
> > > > > > > stable branch to base the last three patches on.
> > > > > > 
> > > > > > Perhaps you meant to CC Greg?
> > > > > 
> > > > > Indeed :-)
> > > > 
> > > > That's a mess, how about Simon just take all of these in his tree:
> > >
> > > We all seem to agree that it's the best solution, so let's do that. There
> > > will be a couple of other sh-sci patches for the next kernel version that
> > > should then go through Simon's tree as well. I will make sure to post
> > > them for review on the linux-serial list and CC you to get your ack (from
> > > what I've been told the ARM SoC maintainer usually dislike driver patches
> > > going through their tree without the driver subsystem maintainer ack).
> > > 
> > > > Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> > > 
> > > Thank you.
> > 
> > Yes, thanks Greg.
> > 
> > Laurent, I have v4 of these patches sitting in patchwork.
> > Would you like me to look at queuing them up as-is or
> > are you planning v5?
> 
> I'm not planning for a v5, but there's another patch series ("[PATCH 00/16] 
> sh-sci: Remove unnecessary fields from platform data") that is similarly 
> organized as sh-sci / platform / sh-sci patches on top of this. Would you like 
> me to reorganize the all the 45 patches in one big series with a single set of 
> platform patches in-between two sets of sh-sci patches ?

That sounds nice, thanks.

To be clear, we are planning sh-sci -> soc -> sh-sci ?

If so, I'll have a word with Olof (CCed) as he tends to want
to avoid such circular dependencies if possible.

Re: [PATCH v3 00/29] Add OF support to the sh-sci serial port driver

[Laurent Pinchart]

Hi Simon,

On Thursday 05 December 2013 16:03:43 Simon Horman wrote:
> On Thu, Dec 05, 2013 at 06:53:41AM +0100, Laurent Pinchart wrote:
> > On Thursday 05 December 2013 12:33:23 Simon Horman wrote:

[snip]

> > > Laurent, I have v4 of these patches sitting in patchwork.
> > > Would you like me to look at queuing them up as-is or
> > > are you planning v5?
> > 
> > I'm not planning for a v5, but there's another patch series ("[PATCH
> > 00/16] sh-sci: Remove unnecessary fields from platform data") that is
> > similarly organized as sh-sci / platform / sh-sci patches on top of this.
> > Would you like me to reorganize the all the 45 patches in one big series
> > with a single set of platform patches in-between two sets of sh-sci
> > patches ?
> 
> That sounds nice, thanks.
> 
> To be clear, we are planning sh-sci -> soc -> sh-sci ?

That's correct. I believe that should be better than

sh-sci -> soc -> sh-sci -> soc -> sh-sci

:-)

> If so, I'll have a word with Olof (CCed) as he tends to want to avoid such
> circular dependencies if possible.

I prefer to avoid them whenever possible as well, but that's not always the 
case. As all sh-sci patches will go through your tree and thus the ARM SoC 
tree for v3.14 that shouldn't be too much of an issue.

-- 
Regards,

Laurent Pinchart

Re: [PATCH v3 00/29] Add OF support to the sh-sci serial port driver

[Simon Horman]

On Thu, Dec 05, 2013 at 11:13:49AM +0100, Laurent Pinchart wrote:
> Hi Simon,
> 
> On Thursday 05 December 2013 16:03:43 Simon Horman wrote:
> > On Thu, Dec 05, 2013 at 06:53:41AM +0100, Laurent Pinchart wrote:
> > > On Thursday 05 December 2013 12:33:23 Simon Horman wrote:
> 
> [snip]
> 
> > > > Laurent, I have v4 of these patches sitting in patchwork.
> > > > Would you like me to look at queuing them up as-is or
> > > > are you planning v5?
> > > 
> > > I'm not planning for a v5, but there's another patch series ("[PATCH
> > > 00/16] sh-sci: Remove unnecessary fields from platform data") that is
> > > similarly organized as sh-sci / platform / sh-sci patches on top of this.
> > > Would you like me to reorganize the all the 45 patches in one big series
> > > with a single set of platform patches in-between two sets of sh-sci
> > > patches ?
> > 
> > That sounds nice, thanks.
> > 
> > To be clear, we are planning sh-sci -> soc -> sh-sci ?
> 
> That's correct. I believe that should be better than
> 
> sh-sci -> soc -> sh-sci -> soc -> sh-sci
> 
> :-)

Yes, indeed.

> > If so, I'll have a word with Olof (CCed) as he tends to want to avoid such
> > circular dependencies if possible.
> 
> I prefer to avoid them whenever possible as well, but that's not always the 
> case. As all sh-sci patches will go through your tree and thus the ARM SoC 
> tree for v3.14 that shouldn't be too much of an issue.

I agree that this seems to be a good choice given the nature
of the changes. I'll try and confirm that Olof feels the same way.

Re: [PATCH v3 00/29] Add OF support to the sh-sci serial port driver

[Olof Johansson]

On Thu, Dec 05, 2013 at 04:03:43PM +0900, Simon Horman wrote:
> On Thu, Dec 05, 2013 at 06:53:41AM +0100, Laurent Pinchart wrote:
> > Hi Simon,
> > 
> > On Thursday 05 December 2013 12:33:23 Simon Horman wrote:
> > > On Tue, Dec 03, 2013 at 07:28:47PM +0100, Laurent Pinchart wrote:
> > > > On Tuesday 03 December 2013 10:09:53 Greg KH wrote:
> > > > > On Thu, Nov 21, 2013 at 08:17:27AM +0100, Laurent Pinchart wrote:
> > > > > > On Thursday 21 November 2013 13:40:38 Simon Horman wrote:
> > > > > > > On Tue, Nov 19, 2013 at 03:02:01PM +0100, Laurent Pinchart wrote:
> > > > > > > > Hello,
> > > > > > > > 
> > > > > > > > This is the third version of the patch set adds device tree
> > > > > > > > bindings for the sh sci serial port devices and adds OF parsing to
> > > > > > > > the sh-sci driver.
> > > > > > > > 
> > > > > > > > The bindings are based on Bastian Hecht's proposal (see
> > > > > > > > http://www.spinics.net/lists/arm-kernel/msg228129.html). The
> > > > > > > > approach taken here is more minimalistic: instead of describing
> > > > > > > > all hardware characteristics that vary between the SCI device
> > > > > > > > revisions in DT (such as registers layout), that information is
> > > > > > > > stored in the driver and selected based on the compatible property
> > > > > > > > value. Only SCI revisions used on ARM devices are supported
> > > > > > > > through DT, as DT support for SuperH is nowhere down the line.
> > > > > > > > 
> > > > > > > > Patches 01/29 to 06/29 clean up the sh-sci driver. Patches 07/29
> > > > > > > > to 27/29 replace memory and interrupt resources passed through
> > > > > > > > platform data with platform resources. Beside replacing a custom
> > > > > > > > mechanism with a standard one, it will also make the DT parsing
> > > > > > > > code simpler as resource allocation will be shared between DT and
> > > > > > > > non-DT code paths. Finally, patches 28/29 to 29/29 add OF parsing
> > > > > > > > to the sh-sci driver and create DT bindings documentation.
> > > > > > > > 
> > > > > > > > The patches have been test on a Lager board (r8a7790-based) and a
> > > > > > > > Koelsch board (r8a7791-based). Support for other SoCs will be
> > > > > > > > added as needed. Note that all current Renesas ARM SoCs seem to be
> > > > > > > > compatible with the generic (H)SCI(F)(AB) devices, but the plan is
> > > > > > > > for their DT bindings to list the SoC-specific version in case
> > > > > > > > incompatibilities are found later.
> > > > > > > > 
> > > > > > > > The series will need to be split in three parts to go to mainline.
> > > > > > > > Patches 01/29 to 07/29 should go through Greg's tree, patches
> > > > > > > > 08/29 to 26/29 through Simon's tree, and patches 27/29 to 29/29
> > > > > > > > through Greg's tree again. Greg, when applying the first seven
> > > > > > > > patches, could you please provide a stable branch for Simon to
> > > > > > > > base his branch on (I can send you a pull request rebased on top
> > > > > > > > of v3.13-rc1 if that can help) ? Simon will in turn provide a
> > > > > > > > stable branch to base the last three patches on.
> > > > > > > 
> > > > > > > Perhaps you meant to CC Greg?
> > > > > > 
> > > > > > Indeed :-)
> > > > > 
> > > > > That's a mess, how about Simon just take all of these in his tree:
> > > >
> > > > We all seem to agree that it's the best solution, so let's do that. There
> > > > will be a couple of other sh-sci patches for the next kernel version that
> > > > should then go through Simon's tree as well. I will make sure to post
> > > > them for review on the linux-serial list and CC you to get your ack (from
> > > > what I've been told the ARM SoC maintainer usually dislike driver patches
> > > > going through their tree without the driver subsystem maintainer ack).
> > > > 
> > > > > Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> > > > 
> > > > Thank you.
> > > 
> > > Yes, thanks Greg.
> > > 
> > > Laurent, I have v4 of these patches sitting in patchwork.
> > > Would you like me to look at queuing them up as-is or
> > > are you planning v5?
> > 
> > I'm not planning for a v5, but there's another patch series ("[PATCH 00/16] 
> > sh-sci: Remove unnecessary fields from platform data") that is similarly 
> > organized as sh-sci / platform / sh-sci patches on top of this. Would you like 
> > me to reorganize the all the 45 patches in one big series with a single set of 
> > platform patches in-between two sets of sh-sci patches ?
> 
> That sounds nice, thanks.
> 
> To be clear, we are planning sh-sci -> soc -> sh-sci ?
> 
> If so, I'll have a word with Olof (CCed) as he tends to want
> to avoid such circular dependencies if possible.

What are the platform changes in the middle that you need?

Re: [PATCH v3 00/29] Add OF support to the sh-sci serial port driver

[Simon Horman]

On Mon, Dec 09, 2013 at 10:59:18AM -0800, Olof Johansson wrote:
> On Thu, Dec 05, 2013 at 04:03:43PM +0900, Simon Horman wrote:
> > On Thu, Dec 05, 2013 at 06:53:41AM +0100, Laurent Pinchart wrote:
> > > Hi Simon,
> > > 
> > > On Thursday 05 December 2013 12:33:23 Simon Horman wrote:
> > > > On Tue, Dec 03, 2013 at 07:28:47PM +0100, Laurent Pinchart wrote:
> > > > > On Tuesday 03 December 2013 10:09:53 Greg KH wrote:
> > > > > > On Thu, Nov 21, 2013 at 08:17:27AM +0100, Laurent Pinchart wrote:
> > > > > > > On Thursday 21 November 2013 13:40:38 Simon Horman wrote:
> > > > > > > > On Tue, Nov 19, 2013 at 03:02:01PM +0100, Laurent Pinchart wrote:
> > > > > > > > > Hello,
> > > > > > > > > 
> > > > > > > > > This is the third version of the patch set adds device tree
> > > > > > > > > bindings for the sh sci serial port devices and adds OF parsing to
> > > > > > > > > the sh-sci driver.
> > > > > > > > > 
> > > > > > > > > The bindings are based on Bastian Hecht's proposal (see
> > > > > > > > > http://www.spinics.net/lists/arm-kernel/msg228129.html). The
> > > > > > > > > approach taken here is more minimalistic: instead of describing
> > > > > > > > > all hardware characteristics that vary between the SCI device
> > > > > > > > > revisions in DT (such as registers layout), that information is
> > > > > > > > > stored in the driver and selected based on the compatible property
> > > > > > > > > value. Only SCI revisions used on ARM devices are supported
> > > > > > > > > through DT, as DT support for SuperH is nowhere down the line.
> > > > > > > > > 
> > > > > > > > > Patches 01/29 to 06/29 clean up the sh-sci driver. Patches 07/29
> > > > > > > > > to 27/29 replace memory and interrupt resources passed through
> > > > > > > > > platform data with platform resources. Beside replacing a custom
> > > > > > > > > mechanism with a standard one, it will also make the DT parsing
> > > > > > > > > code simpler as resource allocation will be shared between DT and
> > > > > > > > > non-DT code paths. Finally, patches 28/29 to 29/29 add OF parsing
> > > > > > > > > to the sh-sci driver and create DT bindings documentation.
> > > > > > > > > 
> > > > > > > > > The patches have been test on a Lager board (r8a7790-based) and a
> > > > > > > > > Koelsch board (r8a7791-based). Support for other SoCs will be
> > > > > > > > > added as needed. Note that all current Renesas ARM SoCs seem to be
> > > > > > > > > compatible with the generic (H)SCI(F)(AB) devices, but the plan is
> > > > > > > > > for their DT bindings to list the SoC-specific version in case
> > > > > > > > > incompatibilities are found later.
> > > > > > > > > 
> > > > > > > > > The series will need to be split in three parts to go to mainline.
> > > > > > > > > Patches 01/29 to 07/29 should go through Greg's tree, patches
> > > > > > > > > 08/29 to 26/29 through Simon's tree, and patches 27/29 to 29/29
> > > > > > > > > through Greg's tree again. Greg, when applying the first seven
> > > > > > > > > patches, could you please provide a stable branch for Simon to
> > > > > > > > > base his branch on (I can send you a pull request rebased on top
> > > > > > > > > of v3.13-rc1 if that can help) ? Simon will in turn provide a
> > > > > > > > > stable branch to base the last three patches on.
> > > > > > > > 
> > > > > > > > Perhaps you meant to CC Greg?
> > > > > > > 
> > > > > > > Indeed :-)
> > > > > > 
> > > > > > That's a mess, how about Simon just take all of these in his tree:
> > > > >
> > > > > We all seem to agree that it's the best solution, so let's do that. There
> > > > > will be a couple of other sh-sci patches for the next kernel version that
> > > > > should then go through Simon's tree as well. I will make sure to post
> > > > > them for review on the linux-serial list and CC you to get your ack (from
> > > > > what I've been told the ARM SoC maintainer usually dislike driver patches
> > > > > going through their tree without the driver subsystem maintainer ack).
> > > > > 
> > > > > > Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> > > > > 
> > > > > Thank you.
> > > > 
> > > > Yes, thanks Greg.
> > > > 
> > > > Laurent, I have v4 of these patches sitting in patchwork.
> > > > Would you like me to look at queuing them up as-is or
> > > > are you planning v5?
> > > 
> > > I'm not planning for a v5, but there's another patch series ("[PATCH 00/16] 
> > > sh-sci: Remove unnecessary fields from platform data") that is similarly 
> > > organized as sh-sci / platform / sh-sci patches on top of this. Would you like 
> > > me to reorganize the all the 45 patches in one big series with a single set of 
> > > platform patches in-between two sets of sh-sci patches ?
> > 
> > That sounds nice, thanks.
> > 
> > To be clear, we are planning sh-sci -> soc -> sh-sci ?
> > 
> > If so, I'll have a word with Olof (CCed) as he tends to want
> > to avoid such circular dependencies if possible.
> 
> What are the platform changes in the middle that you need?

I will let Laurent speak to the nature of the changes.

In terms of patches Laurent has recently published a single series
which includes sh-sci patches, followed by SoC patches, followed
by sh-sci patches. The series is "[PATCH 00/47] sh-sci updates for v3.14"

http://www.spinics.net/lists/linux-sh/msg26033.html

Re: [PATCH v3 00/29] Add OF support to the sh-sci serial port driver

[Laurent Pinchart]

Hi Olof,

On Tuesday 10 December 2013 08:42:05 Simon Horman wrote:
> On Mon, Dec 09, 2013 at 10:59:18AM -0800, Olof Johansson wrote:
> > On Thu, Dec 05, 2013 at 04:03:43PM +0900, Simon Horman wrote:

[snip]

> > > To be clear, we are planning sh-sci -> soc -> sh-sci ?
> > > 
> > > If so, I'll have a word with Olof (CCed) as he tends to want
> > > to avoid such circular dependencies if possible.
> > 
> > What are the platform changes in the middle that you need?
> 
> I will let Laurent speak to the nature of the changes.
> 
> In terms of patches Laurent has recently published a single series
> which includes sh-sci patches, followed by SoC patches, followed
> by sh-sci patches. The series is "[PATCH 00/47] sh-sci updates for v3.14"
> 
> http://www.spinics.net/lists/linux-sh/msg26033.html

There's two of them. The series replaces platform data fields for platform 
device resources (for memory I/O region address and IRQs) and other platform 
data fields (for baud rate calculation information). This requires modifying 
the driver first to support the new method of passing information, followed by 
modifying the platforms to use it, and finally removing the old method from 
the driver.

As all sh-sci driver patches will go through Simon's tree for this kernel 
release, and as the series has been acked by Greg as the serial tree 
maintainer, I believe this should not be a problem from a merge perspective.

-- 
Regards,

Laurent Pinchart

Re: [PATCH v3 00/29] Add OF support to the sh-sci serial port driver

[Laurent Pinchart]

Hi,

On Tuesday 10 December 2013 08:42:05 Simon Horman wrote:
> On Mon, Dec 09, 2013 at 10:59:18AM -0800, Olof Johansson wrote:
> > On Thu, Dec 05, 2013 at 04:03:43PM +0900, Simon Horman wrote:
> > > On Thu, Dec 05, 2013 at 06:53:41AM +0100, Laurent Pinchart wrote:

[snip]

> > > > I'm not planning for a v5, but there's another patch series ("[PATCH
> > > > 00/16] sh-sci: Remove unnecessary fields from platform data") that is
> > > > similarly organized as sh-sci / platform / sh-sci patches on top of
> > > > this. Would you like me to reorganize the all the 45 patches in one
> > > > big series with a single set of platform patches in-between two sets
> > > > of sh-sci patches ?
> > > 
> > > That sounds nice, thanks.
> > > 
> > > To be clear, we are planning sh-sci -> soc -> sh-sci ?
> > > 
> > > If so, I'll have a word with Olof (CCed) as he tends to want
> > > to avoid such circular dependencies if possible.
> > 
> > What are the platform changes in the middle that you need?

Basically we need to change the driver platform data, so the first part gets 
the driver in shape by adding new platform data fields, the second part 
switches the platform code, and the third part removes the old fields. Part of 
this is about switching from passing IRQs and memory base through platform 
data to passing them through resources, which is a dependency for OF support.

> I will let Laurent speak to the nature of the changes.
> 
> In terms of patches Laurent has recently published a single series
> which includes sh-sci patches, followed by SoC patches, followed
> by sh-sci patches. The series is "[PATCH 00/47] sh-sci updates for v3.14"
> 
> http://www.spinics.net/lists/linux-sh/msg26033.html

-- 
Regards,

Laurent Pinchart