From mboxrd@z Thu Jan 1 00:00:00 1970 From: Geert Uytterhoeven Date: Sun, 19 Jan 2014 09:29:54 +0000 Subject: [PATCH] mmc: omap_hsmmc: Restrict compilation to ARM Message-Id: <1390123794-26401-1-git-send-email-geert@linux-m68k.org> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-arm-kernel@lists.infradead.org commit bcf24e1daa94f4c52ef7a3f657e43cc6bc50d46b ("mmc: omap_hsmmc: use the generic config for omap2plus devices"), enabled the build for other platforms for compile testing. sh-allmodconfig now fails with: include/linux/omap-dma.h:171:8: error: expected identifier before numeric constant make[4]: *** [drivers/mmc/host/omap_hsmmc.o] Error 1 This happens because sh #defines "CCR", which is one of the enum values in include/linux/omap-dma.h. I expect a similar failure on blackfin, which also has #define CCR. Restrict the build to ARM to fix this. Signed-off-by: Geert Uytterhoeven --- http://kisskb.ellerman.id.au/kisskb/buildresult/10477672/ drivers/mmc/host/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index 7fc5099e44b2..14e94fb39164 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -284,7 +284,7 @@ config MMC_OMAP config MMC_OMAP_HS tristate "TI OMAP High Speed Multimedia Card Interface support" - depends on ARCH_OMAP2PLUS || COMPILE_TEST + depends on ARCH_OMAP2PLUS || (COMPILE_TEST && ARM) help This selects the TI OMAP High Speed Multimedia card Interface. If you have an omap2plus board with a Multimedia Card slot, -- 1.7.9.5