From: Geert Uytterhoeven <geert@linux-m68k.org>
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/7] pinctrl: sh-pfc: r8a7790: Add QSPI pin groups
Date: Mon, 10 Feb 2014 10:47:27 +0000 [thread overview]
Message-ID: <1392029254-15400-2-git-send-email-geert@linux-m68k.org> (raw)
In-Reply-To: <1392029254-15400-1-git-send-email-geert@linux-m68k.org>
From: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
A QSPI function set consists of 3 groups:
- qspi_ctrl (2 control wires)
- qspi_data2 (2 data wires, for Single/Dual SPI)
- qspi_data4 (4 data wires, for Quad SPI)
Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
drivers/pinctrl/sh-pfc/pfc-r8a7790.c | 33 +++++++++++++++++++++++++++++++++
1 file changed, 33 insertions(+)
diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7790.c b/drivers/pinctrl/sh-pfc/pfc-r8a7790.c
index c381ae63c508..bc9ced3ccd58 100644
--- a/drivers/pinctrl/sh-pfc/pfc-r8a7790.c
+++ b/drivers/pinctrl/sh-pfc/pfc-r8a7790.c
@@ -2389,6 +2389,29 @@ static const unsigned int msiof3_tx_pins[] = {
static const unsigned int msiof3_tx_mux[] = {
MSIOF3_TXD_MARK,
};
+/* - QSPI ------------------------------------------------------------------- */
+static const unsigned int qspi_ctrl_pins[] = {
+ /* SPCLK, SSL */
+ RCAR_GP_PIN(1, 4), RCAR_GP_PIN(1, 9),
+};
+static const unsigned int qspi_ctrl_mux[] = {
+ SPCLK_MARK, SSL_MARK,
+};
+static const unsigned int qspi_data2_pins[] = {
+ /* MOSI_IO0, MISO_IO1 */
+ RCAR_GP_PIN(1, 5), RCAR_GP_PIN(1, 6),
+};
+static const unsigned int qspi_data2_mux[] = {
+ MOSI_IO0_MARK, MISO_IO1_MARK,
+};
+static const unsigned int qspi_data4_pins[] = {
+ /* MOSI_IO0, MISO_IO1, IO2, IO3 */
+ RCAR_GP_PIN(1, 5), RCAR_GP_PIN(1, 6), RCAR_GP_PIN(1, 7),
+ RCAR_GP_PIN(1, 8),
+};
+static const unsigned int qspi_data4_mux[] = {
+ MOSI_IO0_MARK, MISO_IO1_MARK, IO2_MARK, IO3_MARK,
+};
/* - SCIF0 ------------------------------------------------------------------ */
static const unsigned int scif0_data_pins[] = {
/* RX, TX */
@@ -3671,6 +3694,9 @@ static const struct sh_pfc_pin_group pinmux_groups[] = {
SH_PFC_PIN_GROUP(msiof3_ss2),
SH_PFC_PIN_GROUP(msiof3_rx),
SH_PFC_PIN_GROUP(msiof3_tx),
+ SH_PFC_PIN_GROUP(qspi_ctrl),
+ SH_PFC_PIN_GROUP(qspi_data2),
+ SH_PFC_PIN_GROUP(qspi_data4),
SH_PFC_PIN_GROUP(scif0_data),
SH_PFC_PIN_GROUP(scif0_clk),
SH_PFC_PIN_GROUP(scif0_ctrl),
@@ -3970,6 +3996,12 @@ static const char * const msiof3_groups[] = {
"msiof3_tx",
};
+static const char * const qspi_groups[] = {
+ "qspi_ctrl",
+ "qspi_data2",
+ "qspi_data4",
+};
+
static const char * const scif0_groups[] = {
"scif0_data",
"scif0_clk",
@@ -4212,6 +4244,7 @@ static const struct sh_pfc_function pinmux_functions[] = {
SH_PFC_FUNCTION(msiof0),
SH_PFC_FUNCTION(msiof1),
SH_PFC_FUNCTION(msiof2),
+ SH_PFC_FUNCTION(qspi),
SH_PFC_FUNCTION(msiof3),
SH_PFC_FUNCTION(scif0),
SH_PFC_FUNCTION(scif1),
--
1.7.9.5
next prev parent reply other threads:[~2014-02-10 10:47 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-10 10:47 [PATCH 0/7] ARM: shmobile: r8a7790/Lager QSPI SoC/board integration Geert Uytterhoeven
2014-02-10 10:47 ` Geert Uytterhoeven [this message]
2014-02-10 12:48 ` [PATCH 1/7] pinctrl: sh-pfc: r8a7790: Add QSPI pin groups Laurent Pinchart
2014-02-10 12:58 ` Geert Uytterhoeven
2014-02-10 10:47 ` [PATCH 2/7] ARM: shmobile: lager legacy: Add QSPI pinmux Geert Uytterhoeven
2014-02-10 10:47 ` [PATCH 3/7] ARM: shmobile: r8a7790 dtsi: Add QSPI node Geert Uytterhoeven
2014-02-10 10:47 ` [PATCH 4/7] ARM: shmobile: lager dts: Add QSPI nodes Geert Uytterhoeven
2014-02-10 10:47 ` [PATCH 5/7] ARM: shmobile: lager defconfig: Enable RSPI and MTD_M25P80 Geert Uytterhoeven
2014-02-10 10:47 ` [PATCH 6/7] ARM: shmobile: lager legacy: Enable Quad SPI transfers for the SPI FLASH Geert Uytterhoeven
2014-02-10 10:47 ` [PATCH 7/7] ARM: shmobile: lager dts: " Geert Uytterhoeven
2014-02-12 5:01 ` [PATCH 0/7] ARM: shmobile: r8a7790/Lager QSPI SoC/board integration Magnus Damm
2014-02-13 5:34 ` Simon Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1392029254-15400-2-git-send-email-geert@linux-m68k.org \
--to=geert@linux-m68k.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).