linux-sh.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Geert Uytterhoeven <geert@linux-m68k.org>
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 05/11] ARM: shmobile: koelsch legacy: Add MSIOF support
Date: Thu, 20 Feb 2014 14:49:33 +0000	[thread overview]
Message-ID: <1392907779-22053-6-git-send-email-geert@linux-m68k.org> (raw)
In-Reply-To: <1392907779-22053-1-git-send-email-geert@linux-m68k.org>

From: Geert Uytterhoeven <geert+renesas@linux-m68k.org>

Add MSIOF resources, platform data, platform device, pinctrl, and SPI
child device.

  - Platform device numbering is 1-based for compatibility with the BSP,
    as QSPI uses zero.
  - Only MSIOF0 is in use, and thus registered. Its bus contains a single
    device (a Renesas R2A11302FT PMIC).

Based on patches from Takashi Yoshii <takasi-y@ops.dti.ne.jp>

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
---
 arch/arm/mach-shmobile/board-koelsch.c |   59 ++++++++++++++++++++++++++++----
 1 file changed, 53 insertions(+), 6 deletions(-)

diff --git a/arch/arm/mach-shmobile/board-koelsch.c b/arch/arm/mach-shmobile/board-koelsch.c
index 5a034ff405d0..47bf588fc5ce 100644
--- a/arch/arm/mach-shmobile/board-koelsch.c
+++ b/arch/arm/mach-shmobile/board-koelsch.c
@@ -44,6 +44,7 @@
 #include <linux/sh_eth.h>
 #include <linux/spi/flash.h>
 #include <linux/spi/rspi.h>
+#include <linux/spi/sh_msiof.h>
 #include <linux/spi/spi.h>
 #include <mach/common.h>
 #include <mach/irqs.h>
@@ -184,6 +185,35 @@ static const struct rspi_plat_data qspi_pdata __initconst = {
 	.num_chipselect = 1,
 };
 
+/* MSIOF */
+static const struct resource sh_msiof0_resources[] __initconst = {
+	DEFINE_RES_MEM(0xe6e20000, 0x0064),
+	DEFINE_RES_IRQ(gic_spi(156)),
+};
+
+static const struct resource sh_msiof1_resources[] __initconst = {
+	DEFINE_RES_MEM(0xe6e10000, 0x0064),
+	DEFINE_RES_IRQ(gic_spi(157)),
+};
+
+static const struct resource sh_msiof2_resources[] __initconst = {
+	DEFINE_RES_MEM(0xe6e00000, 0x0064),
+	DEFINE_RES_IRQ(gic_spi(158)),
+};
+
+static const struct sh_msiof_spi_info sh_msiof_info __initconst = {
+	.rx_fifo_override	= 256,
+	.num_chipselect		= 1,
+};
+
+#define r8a7791_register_msiof(idx)					\
+	platform_device_register_resndata(&platform_bus,		\
+				"spi_r8a7791_msiof",			\
+				(idx+1), sh_msiof##idx##_resources,	\
+				ARRAY_SIZE(sh_msiof##idx##_resources),	\
+				&sh_msiof_info,				\
+				sizeof(struct sh_msiof_spi_info))
+
 /* SPI Flash memory (Spansion S25FL512SAGMFIG11 64 MiB) */
 static struct mtd_partition spi_flash_part[] = {
 	{
@@ -214,12 +244,19 @@ static const struct flash_platform_data spi_flash_data = {
 
 static const struct spi_board_info spi_info[] __initconst = {
 	{
-		.modalias	= "m25p80",
-		.platform_data	= &spi_flash_data,
-		.mode		= SPI_MODE_0,
-		.max_speed_hz	= 30000000,
-		.bus_num	= 0,
-		.chip_select	= 0,
+		.modalias	 = "m25p80",
+		.platform_data	 = &spi_flash_data,
+		.mode		 = SPI_MODE_0,
+		.max_speed_hz	 = 30000000,
+		.bus_num	 = 0,
+		.chip_select	 = 0,
+	}, {
+		.modalias	 = "r2a1130x",
+		.max_speed_hz	 = 6000000,
+		.chip_select	 = 0,
+		.bus_num	 = 1,
+		.mode		 = SPI_MODE_3,
+		.controller_data = (void *)-ENOENT, /* HW controlled CS */
 	},
 };
 
@@ -384,6 +421,15 @@ static const struct pinctrl_map koelsch_pinctrl_map[] = {
 				  "eth_rmii", "eth"),
 	PIN_MAP_MUX_GROUP_DEFAULT("r8a7791-ether", "pfc-r8a7791",
 				  "intc_irq0", "intc"),
+	/* MSIOF0 */
+	PIN_MAP_MUX_GROUP_DEFAULT("spi_r8a7791_msiof.1", "pfc-r8a7791",
+				  "msiof0_clk", "msiof0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("spi_r8a7791_msiof.1", "pfc-r8a7791",
+				  "msiof0_sync", "msiof0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("spi_r8a7791_msiof.1", "pfc-r8a7791",
+				  "msiof0_rx", "msiof0"),
+	PIN_MAP_MUX_GROUP_DEFAULT("spi_r8a7791_msiof.1", "pfc-r8a7791",
+				  "msiof0_tx", "msiof0"),
 	/* QSPI */
 	PIN_MAP_MUX_GROUP_DEFAULT("qspi.0", "pfc-r8a7791",
 				  "qspi_ctrl", "qspi"),
@@ -449,6 +495,7 @@ static void __init koelsch_add_standard_devices(void)
 					  qspi_resources,
 					  ARRAY_SIZE(qspi_resources),
 					  &qspi_pdata, sizeof(qspi_pdata));
+	r8a7791_register_msiof(0);
 	spi_register_board_info(spi_info, ARRAY_SIZE(spi_info));
 
 	koelsch_add_du_device();
-- 
1.7.9.5


  parent reply	other threads:[~2014-02-20 14:49 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-02-20 14:49 [PATCH 00/11] ARM: shmobile: MSIOF integration on r8a7790/lager and r8a7791/koelsch Geert Uytterhoeven
2014-02-20 14:49 ` [PATCH 01/11] ARM: shmobile: r8a7791 dtsi: Fix typo in msiof2 clock output name Geert Uytterhoeven
2014-02-20 23:24   ` Laurent Pinchart
2014-02-25  9:22   ` Linus Walleij
2014-02-20 14:49 ` [PATCH 02/11] ARM: shmobile: r8a7790: Add MSIOF clocks Geert Uytterhoeven
2014-10-30  8:26   ` [PATCH 02/11] ARM: shmobile: r8a7790: Add Audio DMAC peri peri devices to DT Kuninori Morimoto
2014-10-30  9:35   ` Geert Uytterhoeven
2014-02-20 14:49 ` [PATCH 03/11] ARM: shmobile: r8a7791: Add MSIOF clocks Geert Uytterhoeven
2014-02-20 14:49 ` [PATCH 04/11] ARM: shmobile: lager legacy: Add MSIOF support Geert Uytterhoeven
2014-02-20 15:48   ` Magnus Damm
2014-02-20 16:18     ` Geert Uytterhoeven
2014-02-24  2:09       ` Magnus Damm
2014-02-24  8:25         ` Geert Uytterhoeven
2014-02-24  8:44           ` Magnus Damm
2014-02-24  9:07             ` Geert Uytterhoeven
2014-02-20 14:49 ` Geert Uytterhoeven [this message]
2014-02-20 14:49 ` [PATCH 06/11] ARM: shmobile: r8a7790/lager dts: Rename label spi to qspi, add spi0 alias Geert Uytterhoeven
2014-02-20 14:49 ` [PATCH 07/11] ARM: shmobile: r8a7791/koelsch " Geert Uytterhoeven
2014-02-20 14:49 ` [PATCH 08/11] ARM: shmobile: r8a7790 dtsi: Add MSIOF nodes and aliases Geert Uytterhoeven
2014-02-20 14:49 ` [PATCH 09/11] ARM: shmobile: r8a7791 " Geert Uytterhoeven
2014-02-20 14:49 ` [PATCH 10/11] ARM: shmobile: lager dts: Add MSIOF nodes Geert Uytterhoeven
2014-02-20 14:49 ` [PATCH 11/11] ARM: shmobile: koelsch " Geert Uytterhoeven

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1392907779-22053-6-git-send-email-geert@linux-m68k.org \
    --to=geert@linux-m68k.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).