From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ben Dooks Date: Tue, 01 Apr 2014 12:01:41 +0000 Subject: [PATCH v2 1/6] mmc: sh-mmcif: update to print version and bus clock rate on probe Message-Id: <1396353706-31864-2-git-send-email-ben.dooks@codethink.co.uk> List-Id: References: <1396353706-31864-1-git-send-email-ben.dooks@codethink.co.uk> In-Reply-To: <1396353706-31864-1-git-send-email-ben.dooks@codethink.co.uk> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-mmc@vger.kernel.org Cc: linux-sh@vger.kernel.org, Laurent Pinchart , Ulf Hansson , Chris Ball , Guennadi Liakhovetski , magnus.damm@opensource.se, linux-kernel@lists.codethink.co.uk, Ben Dooks Change the initial print to show chip version and the bus rate it is working at instead of the driver version. This is more useful information as we already know which driver version from the kernel it is in. Signed-off-by: Ben Dooks --- drivers/mmc/host/sh_mmcif.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/mmc/host/sh_mmcif.c b/drivers/mmc/host/sh_mmcif.c index e8713d7..738b155 100644 --- a/drivers/mmc/host/sh_mmcif.c +++ b/drivers/mmc/host/sh_mmcif.c @@ -1470,16 +1470,17 @@ static int sh_mmcif_probe(struct platform_device *pdev) mutex_init(&host->thread_lock); - clk_disable_unprepare(host->hclk); ret = mmc_add_host(mmc); if (ret < 0) goto emmcaddh; dev_pm_qos_expose_latency_limit(&pdev->dev, 100); - dev_info(&pdev->dev, "driver version %s\n", DRIVER_VERSION); - dev_dbg(&pdev->dev, "chip ver H'%04x\n", - sh_mmcif_readl(host->addr, MMCIF_CE_VERSION) & 0x0000ffff); + dev_info(&pdev->dev, "Chip version 0x%04x, clock rate %luMHz\n", + sh_mmcif_readl(host->addr, MMCIF_CE_VERSION) & 0xffff, + clk_get_rate(host->hclk) / 1000000UL); + + clk_disable_unprepare(host->hclk); return ret; emmcaddh: -- 1.9.0