[PATCH v3 4/7] ARM: lager: add vin1 node

[Ben Dooks <ben.dooks@codethink.co.uk>]

Add device-tree for vin1 (composite video in) on the
lager board.

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
---
 arch/arm/boot/dts/r8a7790-lager.dts | 38 +++++++++++++++++++++++++++++++++++++
 1 file changed, 38 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index a087421..6888866 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -158,6 +158,11 @@
 		renesas,groups = "i2c2";
 		renesas,function = "i2c2";
 	};
+
+	vin1_pins: vin {
+		renesas,groups = "vin1_data8", "vin1_clk";
+		renesas,function = "vin1";
+	};
 };
 
 &mmcif1 {
@@ -239,8 +244,41 @@
 	status = "ok";
 	pinctrl-0 = <&i2c2_pins>;
 	pinctrl-names = "default";
+
+	adv7180: composite-in@0x20 {
+		compatible = "adi,adv7180";
+		reg = <0x20>;
+		remote = <&vin1>;
+
+		port {
+			adv7180_1: endpoint {
+				bus-width = <8>;
+				remote-endpoint = <&vin1ep0>;
+			};
+		};
+	};
+
 };
 
 &i2c3	{
 	status = "ok";
 };
+
+/* composite video input */
+&vin1 {
+	pinctrl-0 = <&vin1_pins>;
+	pinctrl-names = "default";
+
+	status = "ok";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vin1ep0: endpoint {
+			remote-endpoint = <&adv7180_1>;
+			bus-width = <8>;
+		};
+	};
+};
+
-- 
1.9.1