From mboxrd@z Thu Jan 1 00:00:00 1970 From: Geert Uytterhoeven Date: Mon, 14 Apr 2014 17:00:40 +0000 Subject: [PATCH] clk: Improve clock-indices binding documentation Message-Id: <1397494840-22420-1-git-send-email-geert@linux-m68k.org> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: Mike Turquette Cc: Ben Dooks , Laurent Pinchart , Sergei Shtylyov , devicetree@vger.kernel.org, linux-sh@vger.kernel.org, Geert Uytterhoeven From: Geert Uytterhoeven Improve the wording for the clock-indices binding documentation. Also replace "empty nodes" by "empty strings", as reported before by Sergei Shtylyov. Signed-off-by: Geert Uytterhoeven --- .../devicetree/bindings/clock/clock-bindings.txt | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/Documentation/devicetree/bindings/clock/clock-bindings.txt b/Documentation/devicetree/bindings/clock/clock-bindings.txt index 700e7aac3717..f15787817d6b 100644 --- a/Documentation/devicetree/bindings/clock/clock-bindings.txt +++ b/Documentation/devicetree/bindings/clock/clock-bindings.txt @@ -44,10 +44,9 @@ For example: clocks by index. The names should reflect the clock output signal names for the device. -clock-indices: If the identifyng number for the clocks in the node - is not linear from zero, then the this mapping allows - the mapping of identifiers into the clock-output-names - array. +clock-indices: If the identifying number for the clocks in the node + is not linear from zero, then this allows the mapping of + identifiers into the clock-output-names array. For example, if we have two clocks <&oscillator 1> and <&oscillator 3>: @@ -58,7 +57,7 @@ For example, if we have two clocks <&oscillator 1> and <&oscillator 3>: clock-output-names = "clka", "clkb"; } - This ensures we do not have any empty nodes in clock-output-names + This ensures we do not have any empty strings in clock-output-names =Clock consumers= -- 1.7.9.5