From: Geert Uytterhoeven <geert+renesas@glider.be>
To: linux-sh@vger.kernel.org
Subject: [PATCH v3 2/2] ARM: shmobile: r8a7791 dtsi: Add GPIO clocks
Date: Wed, 23 Apr 2014 08:25:28 +0000 [thread overview]
Message-ID: <1398241528-7733-2-git-send-email-geert+renesas@glider.be> (raw)
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
v3:
- Add Acked-by
- Bindings have been accepted in
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio.git#for-next
v2:
- No changes
---
arch/arm/boot/dts/r8a7791.dtsi | 19 ++++++++++++++++---
1 file changed, 16 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 44f03444ef74..81f27a35b19f 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -76,6 +76,7 @@
gpio-ranges = <&pfc 0 0 32>;
#interrupt-cells = <2>;
interrupt-controller;
+ clocks = <&mstp9_clks R8A7791_CLK_GPIO0>;
};
gpio1: gpio@e6051000 {
@@ -87,6 +88,7 @@
gpio-ranges = <&pfc 0 32 32>;
#interrupt-cells = <2>;
interrupt-controller;
+ clocks = <&mstp9_clks R8A7791_CLK_GPIO1>;
};
gpio2: gpio@e6052000 {
@@ -98,6 +100,7 @@
gpio-ranges = <&pfc 0 64 32>;
#interrupt-cells = <2>;
interrupt-controller;
+ clocks = <&mstp9_clks R8A7791_CLK_GPIO2>;
};
gpio3: gpio@e6053000 {
@@ -109,6 +112,7 @@
gpio-ranges = <&pfc 0 96 32>;
#interrupt-cells = <2>;
interrupt-controller;
+ clocks = <&mstp9_clks R8A7791_CLK_GPIO3>;
};
gpio4: gpio@e6054000 {
@@ -120,6 +124,7 @@
gpio-ranges = <&pfc 0 128 32>;
#interrupt-cells = <2>;
interrupt-controller;
+ clocks = <&mstp9_clks R8A7791_CLK_GPIO4>;
};
gpio5: gpio@e6055000 {
@@ -131,6 +136,7 @@
gpio-ranges = <&pfc 0 160 32>;
#interrupt-cells = <2>;
interrupt-controller;
+ clocks = <&mstp9_clks R8A7791_CLK_GPIO5>;
};
gpio6: gpio@e6055400 {
@@ -142,6 +148,7 @@
gpio-ranges = <&pfc 0 192 32>;
#interrupt-cells = <2>;
interrupt-controller;
+ clocks = <&mstp9_clks R8A7791_CLK_GPIO6>;
};
gpio7: gpio@e6055800 {
@@ -153,6 +160,7 @@
gpio-ranges = <&pfc 0 224 26>;
#interrupt-cells = <2>;
interrupt-controller;
+ clocks = <&mstp9_clks R8A7791_CLK_GPIO7>;
};
thermal@e61f0000 {
@@ -805,18 +813,23 @@
mstp9_clks: mstp9_clks@e6150994 {
compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>;
- clocks = <&p_clk>, <&p_clk>, <&cpg_clocks R8A7791_CLK_QSPI>, <&hp_clk>,
+ clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>,
+ <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>,
+ <&p_clk>, <&p_clk>, <&cpg_clocks R8A7791_CLK_QSPI>, <&hp_clk>,
<&cp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>,
<&hp_clk>, <&hp_clk>;
#clock-cells = <1>;
renesas,clock-indices = <
+ R8A7791_CLK_GPIO7 R8A7791_CLK_GPIO6 R8A7791_CLK_GPIO5 R8A7791_CLK_GPIO4
+ R8A7791_CLK_GPIO3 R8A7791_CLK_GPIO2 R8A7791_CLK_GPIO1 R8A7791_CLK_GPIO0
R8A7791_CLK_RCAN1 R8A7791_CLK_RCAN0 R8A7791_CLK_QSPI_MOD R8A7791_CLK_I2C5
R8A7791_CLK_IICDVFS R8A7791_CLK_I2C4 R8A7791_CLK_I2C3 R8A7791_CLK_I2C2
R8A7791_CLK_I2C1 R8A7791_CLK_I2C0
>;
clock-output-names - "rcan1", "rcan0", "qspi_mod", "i2c5", "i2c6", "i2c4", "i2c3",
- "i2c2", "i2c1", "i2c0";
+ "gpio7", "gpio6", "gpio5", "gpio4", "gpio3", "gpio2", "gpio1", "gpio0",
+ "rcan1", "rcan0", "qspi_mod", "i2c5", "i2c6", "i2c4", "i2c3", "i2c2",
+ "i2c1", "i2c0";
};
mstp11_clks: mstp11_clks@e615099c {
compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
--
1.7.9.5
next reply other threads:[~2014-04-23 8:25 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-23 8:25 Geert Uytterhoeven [this message]
-- strict thread matches above, loose matches on Subject: below --
2014-05-13 1:49 [PATCH v3 2/2] ARM: shmobile: r8a7791 dtsi: Add GPIO clocks Simon Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1398241528-7733-2-git-send-email-geert+renesas@glider.be \
--to=geert+renesas@glider.be \
--cc=linux-sh@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).