From: Wolfram Sang <wsa@the-dreams.de>
To: linux-i2c@vger.kernel.org
Cc: linux-sh@vger.kernel.org, Wolfram Sang <wsa@the-dreams.de>,
Magnus Damm <magnus.damm@gmail.com>,
Simon Horman <horms@verge.net.au>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Geert Uytterhoeven <geert@linux-m68k.org>,
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Subject: [PATCH 04/11] i2c: rcar: refactor irq state machine
Date: Wed, 28 May 2014 07:44:39 +0000 [thread overview]
Message-ID: <1401263086-13720-5-git-send-email-wsa@the-dreams.de> (raw)
In-Reply-To: <1401263086-13720-1-git-send-email-wsa@the-dreams.de>
From: Wolfram Sang <wsa+renesas@sang-engineering.com>
Remove the seperate functions and use designated constants. As readable
but less overhead. Actually, this is even more readable since the old
function used a mix of "=" and "|=".
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
drivers/i2c/busses/i2c-rcar.c | 39 +++++++--------------------------------
1 file changed, 7 insertions(+), 32 deletions(-)
diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c
index e0cdab488cc5..9757adf33f37 100644
--- a/drivers/i2c/busses/i2c-rcar.c
+++ b/drivers/i2c/busses/i2c-rcar.c
@@ -83,12 +83,9 @@
#define RCAR_BUS_PHASE_DATA (MDBS | MIE)
#define RCAR_BUS_PHASE_STOP (MDBS | MIE | FSB)
-enum {
- RCAR_IRQ_CLOSE,
- RCAR_IRQ_OPEN_FOR_SEND,
- RCAR_IRQ_OPEN_FOR_RECV,
- RCAR_IRQ_OPEN_FOR_STOP,
-};
+#define RCAR_IRQ_SEND (MNRE | MALE | MSTE | MATE | MDEE)
+#define RCAR_IRQ_RECV (MNRE | MALE | MSTE | MATE | MDRE)
+#define RCAR_IRQ_STOP (MSTE)
/*
* flags
@@ -158,28 +155,6 @@ static void rcar_i2c_init(struct rcar_i2c_priv *priv)
rcar_i2c_write(priv, ICMAR, 0);
}
-static void rcar_i2c_irq_mask(struct rcar_i2c_priv *priv, int open)
-{
- u32 val = MNRE | MALE | MSTE | MATE; /* default */
-
- switch (open) {
- case RCAR_IRQ_OPEN_FOR_SEND:
- val |= MDEE; /* default + send */
- break;
- case RCAR_IRQ_OPEN_FOR_RECV:
- val |= MDRE; /* default + read */
- break;
- case RCAR_IRQ_OPEN_FOR_STOP:
- val = MSTE; /* stop irq only */
- break;
- case RCAR_IRQ_CLOSE:
- default:
- val = 0; /* all close */
- break;
- }
- rcar_i2c_write(priv, ICMIER, val);
-}
-
static void rcar_i2c_set_addr(struct rcar_i2c_priv *priv, u32 recv)
{
rcar_i2c_write(priv, ICMAR, (priv->msg->addr << 1) | recv);
@@ -312,7 +287,7 @@ static int rcar_i2c_recv(struct rcar_i2c_priv *priv)
rcar_i2c_set_addr(priv, 1);
rcar_i2c_status_clear(priv);
rcar_i2c_write(priv, ICMCR, RCAR_BUS_PHASE_START);
- rcar_i2c_irq_mask(priv, RCAR_IRQ_OPEN_FOR_RECV);
+ rcar_i2c_write(priv, ICMIER, RCAR_IRQ_RECV);
return 0;
}
@@ -331,7 +306,7 @@ static int rcar_i2c_send(struct rcar_i2c_priv *priv)
rcar_i2c_set_addr(priv, 0);
rcar_i2c_status_clear(priv);
rcar_i2c_write(priv, ICMCR, RCAR_BUS_PHASE_START);
- rcar_i2c_irq_mask(priv, RCAR_IRQ_OPEN_FOR_SEND);
+ rcar_i2c_write(priv, ICMIER, RCAR_IRQ_SEND);
return 0;
}
@@ -486,7 +461,7 @@ static irqreturn_t rcar_i2c_irq(int irq, void *ptr)
/* go to stop phase */
rcar_i2c_write(priv, ICMCR, RCAR_BUS_PHASE_STOP);
- rcar_i2c_irq_mask(priv, RCAR_IRQ_OPEN_FOR_STOP);
+ rcar_i2c_write(priv, ICMIER, RCAR_IRQ_STOP);
rcar_i2c_flags_set(priv, ID_NACK);
goto out;
}
@@ -501,7 +476,7 @@ static irqreturn_t rcar_i2c_irq(int irq, void *ptr)
out:
if (rcar_i2c_flags_has(priv, ID_DONE)) {
- rcar_i2c_irq_mask(priv, RCAR_IRQ_CLOSE);
+ rcar_i2c_write(priv, ICMIER, 0);
rcar_i2c_status_clear(priv);
wake_up(&priv->wait);
}
--
2.0.0.rc2
next prev parent reply other threads:[~2014-05-28 7:44 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-28 7:44 [PATCH 00/11] i2c: rcar: cleanup series Wolfram Sang
2014-05-28 7:44 ` [PATCH 01/11] i2c: rcar: not everything needs to be a function Wolfram Sang
2014-05-28 7:44 ` [PATCH 02/11] i2c: rcar: no need to store irq number Wolfram Sang
2014-05-28 7:44 ` Wolfram Sang [this message]
2014-05-28 7:44 ` [PATCH 05/11] i2c: rcar: check bus free before first message Wolfram Sang
2014-05-28 7:44 ` [PATCH 07/11] i2c: rcar: refactor status bit handling Wolfram Sang
2014-05-28 7:44 ` [PATCH 08/11] i2c: rcar: remove spinlock Wolfram Sang
2014-08-22 23:54 ` Sergei Shtylyov
2014-08-23 3:08 ` Wolfram Sang
2014-09-02 22:10 ` Sergei Shtylyov
[not found] ` <5406404A.7090509-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org>
2014-09-02 22:18 ` Wolfram Sang
2014-05-28 7:44 ` [PATCH 09/11] i2c: rcar: reuse status bits as enable bits Wolfram Sang
2014-05-28 7:44 ` [PATCH 10/11] i2c: rcar: janitorial cleanup after refactoring Wolfram Sang
2014-05-28 7:44 ` [PATCH 11/11] i2c: rcar: update copyright and license information Wolfram Sang
2014-05-28 8:11 ` [PATCH 00/11] i2c: rcar: cleanup series Kuninori Morimoto
[not found] ` <1401263086-13720-1-git-send-email-wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org>
2014-05-28 7:44 ` [PATCH 03/11] i2c: rcar: refactor bus state machine Wolfram Sang
2014-05-28 7:44 ` [PATCH 06/11] i2c: rcar: refactor setting up msg Wolfram Sang
2014-05-28 8:26 ` [PATCH 00/11] i2c: rcar: cleanup series Geert Uytterhoeven
2014-06-01 20:24 ` Wolfram Sang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1401263086-13720-5-git-send-email-wsa@the-dreams.de \
--to=wsa@the-dreams.de \
--cc=geert@linux-m68k.org \
--cc=horms@verge.net.au \
--cc=kuninori.morimoto.gx@renesas.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-sh@vger.kernel.org \
--cc=magnus.damm@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).