From mboxrd@z Thu Jan 1 00:00:00 1970 From: Geert Uytterhoeven Date: Fri, 09 Jan 2015 13:13:54 +0000 Subject: [PATCH 2/4] ARM: shmobile: kzm9g dts: Move Ethernet node to BSC Message-Id: <1420809236-4105-2-git-send-email-geert+renesas@glider.be> List-Id: References: <1420809236-4105-1-git-send-email-geert+renesas@glider.be> In-Reply-To: <1420809236-4105-1-git-send-email-geert+renesas@glider.be> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-arm-kernel@lists.infradead.org Move the Ethernet node from the root of the device tree to the BSC node, as it's connected to the Bus State Controller. This allows the system to know the right position of the Ethernet node in the clock and PM domain hierarchy, and manage the clock and PM domain appropriately. Also rename the node's name from "lan9220" to "ethernet", to conform to ePAPR generic name recomendations. Signed-off-by: Geert Uytterhoeven --- v3: - No changes, v2: - s/confirm/conform/, - Moved from kzm9g-reference to kzm9g. --- arch/arm/boot/dts/sh73a0-kzm9g.dts | 28 +++++++++++++++------------- 1 file changed, 15 insertions(+), 13 deletions(-) diff --git a/arch/arm/boot/dts/sh73a0-kzm9g.dts b/arch/arm/boot/dts/sh73a0-kzm9g.dts index 6f00e6b680e8e0fa..022ba505f57339a9 100644 --- a/arch/arm/boot/dts/sh73a0-kzm9g.dts +++ b/arch/arm/boot/dts/sh73a0-kzm9g.dts @@ -84,19 +84,6 @@ enable-active-high; }; - lan9220@10000000 { - compatible = "smsc,lan9220", "smsc,lan9115"; - reg = <0x10000000 0x100>; - phy-mode = "mii"; - interrupt-parent = <&irqpin0>; - interrupts = <3 IRQ_TYPE_EDGE_FALLING>; - reg-io-width = <4>; - smsc,irq-push-pull; - smsc,save-mac-address; - vddvario-supply = <®_1p8v>; - vdd33a-supply = <®_3p3v>; - }; - leds { compatible = "gpio-leds"; led1 { @@ -178,6 +165,21 @@ }; }; +&bsc { + ethernet@10000000 { + compatible = "smsc,lan9220", "smsc,lan9115"; + reg = <0x10000000 0x100>; + phy-mode = "mii"; + interrupt-parent = <&irqpin0>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + reg-io-width = <4>; + smsc,irq-push-pull; + smsc,save-mac-address; + vddvario-supply = <®_1p8v>; + vdd33a-supply = <®_3p3v>; + }; +}; + &cmt1 { status = "okay"; }; -- 1.9.1