From: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
To: linux-sh@vger.kernel.org
Subject: [PATCH 04/11] ARM: shmobile: r8a7778: common clock framework CPG driver
Date: Wed, 21 Jan 2015 16:20:55 +0000 [thread overview]
Message-ID: <1421857262-16607-5-git-send-email-ulrich.hecht+renesas@gmail.com> (raw)
Driver for the r8a7778's clocks that depend on the mode bits.
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
---
.../bindings/clock/renesas,r8a7778-cpg-clocks.txt | 24 ++++
arch/arm/mach-shmobile/board-bockw-reference.c | 2 +
arch/arm/mach-shmobile/setup-r8a7778.c | 19 +++
drivers/clk/shmobile/Makefile | 1 +
drivers/clk/shmobile/clk-r8a7778.c | 146 +++++++++++++++++++++
include/linux/clk/shmobile.h | 1 +
6 files changed, 193 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/renesas,r8a7778-cpg-clocks.txt
create mode 100644 drivers/clk/shmobile/clk-r8a7778.c
diff --git a/Documentation/devicetree/bindings/clock/renesas,r8a7778-cpg-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,r8a7778-cpg-clocks.txt
new file mode 100644
index 0000000..c9a9544
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/renesas,r8a7778-cpg-clocks.txt
@@ -0,0 +1,24 @@
+* Renesas R8A7778 Clock Pulse Generator (CPG)
+
+The CPG generates core clocks for the R8A7778. It includes two PLLs and
+several fixed ratio dividers
+
+Required Properties:
+
+ - compatible: Must be "renesas,r8a7778-cpg-clocks"
+ - reg: Base address and length of the memory resource used by the CPG
+ - #clock-cells: Must be 1
+ - clock-output-names: The names of the clocks. Supported clocks are
+ "extal", "plla", "pllb", "b", "out", "p", "s", and "s1".
+
+
+Example
+-------
+
+ cpg_clocks: cpg_clocks@ffc80000 {
+ compatible = "renesas,r8a7778-cpg-clocks";
+ reg = <0xffc80000 0x80>;
+ #clock-cells = <1>;
+ clock-output-names = "extal", "plla", "pllb", "b",
+ "out", "p", "s", "s1";
+ };
diff --git a/arch/arm/mach-shmobile/board-bockw-reference.c b/arch/arm/mach-shmobile/board-bockw-reference.c
index d649ade..9a74efd 100644
--- a/arch/arm/mach-shmobile/board-bockw-reference.c
+++ b/arch/arm/mach-shmobile/board-bockw-reference.c
@@ -36,7 +36,9 @@ static void __init bockw_init(void)
void __iomem *fpga;
void __iomem *pfc;
+#ifndef CONFIG_COMMON_CLK
r8a7778_clock_init();
+#endif
r8a7778_init_irq_extpin_dt(1);
r8a7778_add_dt_devices();
diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c
index cef8895..c49aa09 100644
--- a/arch/arm/mach-shmobile/setup-r8a7778.c
+++ b/arch/arm/mach-shmobile/setup-r8a7778.c
@@ -15,6 +15,7 @@
* GNU General Public License for more details.
*/
+#include <linux/clk/shmobile.h>
#include <linux/kernel.h>
#include <linux/io.h>
#include <linux/irqchip/arm-gic.h>
@@ -41,6 +42,21 @@
#include "irqs.h"
#include "r8a7778.h"
+#define MODEMR 0xffcc0020
+
+#ifdef CONFIG_COMMON_CLK
+static void __init r8a7778_timer_init(void)
+{
+ u32 mode;
+ void __iomem *modemr = ioremap_nocache(MODEMR, 4);
+
+ BUG_ON(!modemr);
+ mode = ioread32(modemr);
+ iounmap(modemr);
+ r8a7778_clocks_init(mode);
+}
+#endif
+
/* SCIF */
#define R8A7778_SCIF(index, baseaddr, irq) \
static struct plat_sci_port scif##index##_platform_data = { \
@@ -608,6 +624,9 @@ DT_MACHINE_START(R8A7778_DT, "Generic R8A7778 (Flattened Device Tree)")
.init_early = shmobile_init_delay,
.init_irq = r8a7778_init_irq_dt,
.init_late = shmobile_init_late,
+#ifdef CONFIG_COMMON_CLK
+ .init_time = r8a7778_timer_init,
+#endif
.dt_compat = r8a7778_compat_dt,
MACHINE_END
diff --git a/drivers/clk/shmobile/Makefile b/drivers/clk/shmobile/Makefile
index 0689d7f..97c71c8 100644
--- a/drivers/clk/shmobile/Makefile
+++ b/drivers/clk/shmobile/Makefile
@@ -2,6 +2,7 @@ obj-$(CONFIG_ARCH_EMEV2) += clk-emev2.o
obj-$(CONFIG_ARCH_R7S72100) += clk-rz.o
obj-$(CONFIG_ARCH_R8A73A4) += clk-r8a73a4.o
obj-$(CONFIG_ARCH_R8A7740) += clk-r8a7740.o
+obj-$(CONFIG_ARCH_R8A7778) += clk-r8a7778.o
obj-$(CONFIG_ARCH_R8A7779) += clk-r8a7779.o
obj-$(CONFIG_ARCH_R8A7790) += clk-rcar-gen2.o
obj-$(CONFIG_ARCH_R8A7791) += clk-rcar-gen2.o
diff --git a/drivers/clk/shmobile/clk-r8a7778.c b/drivers/clk/shmobile/clk-r8a7778.c
new file mode 100644
index 0000000..30c5c14
--- /dev/null
+++ b/drivers/clk/shmobile/clk-r8a7778.c
@@ -0,0 +1,146 @@
+/*
+ * r8a7778 Core CPG Clocks
+ *
+ * Copyright (C) 2014 Ulrich Hecht
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/clk/shmobile.h>
+#include <linux/of_address.h>
+
+struct r8a7778_cpg {
+ struct clk_onecell_data data;
+ spinlock_t lock;
+ void __iomem *reg;
+};
+
+/* EXTAL rate and PLL multipliers per bits 11, 12, and 18 of MODEMR */
+struct {
+ unsigned long extal_rate;
+ unsigned long plla_mult;
+ unsigned long pllb_mult;
+} r8a7778_rates[] __initdata = {
+ [0] = { 38000000, 21, 21},
+ [1] = { 33333333, 24, 24},
+ [2] = { 28500000, 28, 28},
+ [3] = { 25000000, 32, 32},
+ [5] = { 33333333, 24, 21},
+ [6] = { 28500000, 28, 21},
+ [7] = { 25000000, 32, 24},
+};
+
+/* Clock dividers per bits 1 and 2 of MODEMR */
+struct {
+ const char *name;
+ unsigned int div[4];
+} r8a7778_divs[6] __initdata = {
+ { "b", { 12, 12, 16, 18 } },
+ { "out", { 12, 12, 16, 18 } },
+ { "p", { 16, 12, 16, 12 } },
+ { "s", { 4, 3, 4, 3 } },
+ { "s1", { 8, 6, 8, 6 } },
+ { NULL },
+};
+
+static u32 cpg_mode_rates __initdata;
+static u32 cpg_mode_divs __initdata;
+
+static struct clk * __init
+r8a7778_cpg_register_clock(struct device_node *np, struct r8a7778_cpg *cpg,
+ const char *name)
+{
+ if (!strcmp(name, "extal")) {
+ return clk_register_fixed_rate(NULL, "extal", NULL,
+ CLK_IS_ROOT, r8a7778_rates[cpg_mode_rates].extal_rate);
+ } else if (!strcmp(name, "plla")) {
+ return clk_register_fixed_factor(NULL, "plla", "extal", 0,
+ r8a7778_rates[cpg_mode_rates].plla_mult, 1);
+ } else if (!strcmp(name, "pllb")) {
+ return clk_register_fixed_factor(NULL, "pllb", "extal", 0,
+ r8a7778_rates[cpg_mode_rates].pllb_mult, 1);
+ } else {
+ unsigned int i;
+
+ for (i = 0; r8a7778_divs[i].name; i++) {
+ if (!strcmp(name, r8a7778_divs[i].name)) {
+ return clk_register_fixed_factor(NULL,
+ r8a7778_divs[i].name,
+ "plla", 0, 1,
+ r8a7778_divs[i].div[cpg_mode_divs]);
+ }
+ }
+ }
+
+ return ERR_PTR(-EINVAL);
+}
+
+
+static void __init r8a7778_cpg_clocks_init(struct device_node *np)
+{
+ struct r8a7778_cpg *cpg;
+ struct clk **clks;
+ unsigned int i;
+ int num_clks;
+
+ num_clks = of_property_count_strings(np, "clock-output-names");
+ if (num_clks < 0) {
+ pr_err("%s: failed to count clocks\n", __func__);
+ return;
+ }
+
+ cpg = kzalloc(sizeof(*cpg), GFP_KERNEL);
+ clks = kcalloc(num_clks, sizeof(*clks), GFP_KERNEL);
+ if (cpg = NULL || clks = NULL) {
+ /* We're leaking memory on purpose, there's no point in cleaning
+ * up as the system won't boot anyway.
+ */
+ return;
+ }
+
+ spin_lock_init(&cpg->lock);
+
+ cpg->data.clks = clks;
+ cpg->data.clk_num = num_clks;
+
+ cpg->reg = of_iomap(np, 0);
+ if (WARN_ON(cpg->reg = NULL))
+ return;
+
+ for (i = 0; i < num_clks; ++i) {
+ const char *name;
+ struct clk *clk;
+
+ of_property_read_string_index(np, "clock-output-names", i,
+ &name);
+
+ clk = r8a7778_cpg_register_clock(np, cpg, name);
+ if (IS_ERR(clk))
+ pr_err("%s: failed to register %s %s clock (%ld)\n",
+ __func__, np->name, name, PTR_ERR(clk));
+ else
+ cpg->data.clks[i] = clk;
+ }
+
+ of_clk_add_provider(np, of_clk_src_onecell_get, &cpg->data);
+}
+
+CLK_OF_DECLARE(r8a7778_cpg_clks, "renesas,r8a7778-cpg-clocks",
+ r8a7778_cpg_clocks_init);
+
+void __init r8a7778_clocks_init(u32 mode)
+{
+ if (!(mode & BIT(19)))
+ BUG();
+ cpg_mode_rates = (!!(mode & BIT(18)) << 2) |
+ (!!(mode & BIT(12)) << 1) |
+ (!!(mode & BIT(11)));
+ cpg_mode_divs = (!!(mode & BIT(2)) << 1) |
+ (!!(mode & BIT(1)));
+
+ of_clk_init(NULL);
+}
diff --git a/include/linux/clk/shmobile.h b/include/linux/clk/shmobile.h
index 9f8a140..63a8159 100644
--- a/include/linux/clk/shmobile.h
+++ b/include/linux/clk/shmobile.h
@@ -16,6 +16,7 @@
#include <linux/types.h>
+void r8a7778_clocks_init(u32 mode);
void r8a7779_clocks_init(u32 mode);
void rcar_gen2_clocks_init(u32 mode);
--
2.2.2
next reply other threads:[~2015-01-21 16:20 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-21 16:20 Ulrich Hecht [this message]
2015-01-21 23:37 ` [PATCH 04/11] ARM: shmobile: r8a7778: common clock framework CPG driver Laurent Pinchart
2015-01-23 9:12 ` Geert Uytterhoeven
2015-01-23 17:00 ` Ulrich Hecht
2015-01-24 23:16 ` Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1421857262-16607-5-git-send-email-ulrich.hecht+renesas@gmail.com \
--to=ulrich.hecht+renesas@gmail.com \
--cc=linux-sh@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).