From: Geert Uytterhoeven <geert+renesas@glider.be>
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 5/5] drivers: bus: Add Simple Power-Managed Bus Driver
Date: Mon, 26 Jan 2015 16:16:17 +0000 [thread overview]
Message-ID: <1422288977-20353-6-git-send-email-geert+renesas@glider.be> (raw)
In-Reply-To: <1422288977-20353-1-git-send-email-geert+renesas@glider.be>
Add a driver for transparent busses that don't need a real driver, but
where the bus controller is part of a PM domain, or under the control of
a functional clock. Typically, the bus controller's PM domain and/or
clock must be enabled for child devices connected to the bus (either
on-SoC or externally) to function.
Hence the sole purpose of this driver is to enable its clock and PM
domain (if exist(s)), which are specified in the DT and managed from
platform and PM domain code, and to probe for child devices.
Due to the child-parent relationship with devices connected to the bus,
PM domain and clock state transitions are handled in the correct order.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
---
v4:
- Bind against the generic "simple-pm-bus" instead of "renesas,bsc",
- Explicitly call of_platform_populate() after pm_runtime_enable() to
enforce ordering, instead of depending on claimed compatibility with
"simple-bus",
v3:
- Add Tested-by,
v2:
- Rename from "Renesas Bus State Controller Driver" (renesas-bsc) to
"Simple Power-Managed Bus Driver" (simple-pm-bus),
- Change module license to GPL v2,
- Change email address to geert+renesas@glider.be.
---
drivers/bus/Kconfig | 13 ++++++++++
drivers/bus/Makefile | 1 +
drivers/bus/simple-pm-bus.c | 58 +++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 72 insertions(+)
create mode 100644 drivers/bus/simple-pm-bus.c
diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig
index 626960819e6df16c..7e9c2674af81d6e9 100644
--- a/drivers/bus/Kconfig
+++ b/drivers/bus/Kconfig
@@ -58,6 +58,19 @@ config OMAP_OCP2SCP
OCP2SCP and in OMAP5, both USB PHY and SATA PHY is connected via
OCP2SCP.
+config SIMPLE_PM_BUS
+ bool "Simple Power-Managed Bus Driver"
+ depends on OF && PM
+ depends on ARCH_SHMOBILE || COMPILE_TEST
+ help
+ Driver for transparent busses that don't need a real driver, but
+ where the bus controller is part of a PM domain, or under the control
+ of a functional clock, and thus relies on runtime PM for managing
+ this PM domain and/or clock.
+ An example of such a bus controller is the Renesas Bus State
+ Controller (BSC, sometimes called "LBSC within Bus Bridge", or
+ "External Bus Interface") as found on several Renesas ARM SoCs.
+
config VEXPRESS_CONFIG
bool "Versatile Express configuration bus"
default y if ARCH_VEXPRESS
diff --git a/drivers/bus/Makefile b/drivers/bus/Makefile
index 3cfaf2c7f25ac4f0..e023a2bec664d900 100644
--- a/drivers/bus/Makefile
+++ b/drivers/bus/Makefile
@@ -14,4 +14,5 @@ obj-$(CONFIG_MVEBU_MBUS) += mvebu-mbus.o
obj-$(CONFIG_OMAP_INTERCONNECT) += omap_l3_smx.o omap_l3_noc.o
obj-$(CONFIG_OMAP_OCP2SCP) += omap-ocp2scp.o
+obj-$(CONFIG_SIMPLE_PM_BUS) += simple-pm-bus.o
obj-$(CONFIG_VEXPRESS_CONFIG) += vexpress-config.o
diff --git a/drivers/bus/simple-pm-bus.c b/drivers/bus/simple-pm-bus.c
new file mode 100644
index 0000000000000000..c5eb46cbf388b507
--- /dev/null
+++ b/drivers/bus/simple-pm-bus.c
@@ -0,0 +1,58 @@
+/*
+ * Simple Power-Managed Bus Driver
+ *
+ * Copyright (C) 2014-2015 Glider bvba
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+
+
+static int simple_pm_bus_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+
+ dev_dbg(&pdev->dev, "%s\n", __func__);
+
+ pm_runtime_enable(&pdev->dev);
+
+ if (np)
+ of_platform_populate(np, NULL, NULL, &pdev->dev);
+
+ return 0;
+}
+
+static int simple_pm_bus_remove(struct platform_device *pdev)
+{
+ dev_dbg(&pdev->dev, "%s\n", __func__);
+
+ pm_runtime_disable(&pdev->dev);
+ return 0;
+}
+
+static const struct of_device_id simple_pm_bus_of_match[] = {
+ { .compatible = "simple-pm-bus", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, simple_pm_bus_of_match);
+
+static struct platform_driver simple_pm_bus_driver = {
+ .probe = simple_pm_bus_probe,
+ .remove = simple_pm_bus_remove,
+ .driver = {
+ .name = "simple-pm-bus",
+ .of_match_table = simple_pm_bus_of_match,
+ },
+};
+
+module_platform_driver(simple_pm_bus_driver);
+
+MODULE_DESCRIPTION("Simple Power-Managed Bus Driver");
+MODULE_AUTHOR("Geert Uytterhoeven <geert+renesas@glider.be>");
+MODULE_LICENSE("GPL v2");
--
1.9.1
next prev parent reply other threads:[~2015-01-26 16:16 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-26 16:16 [PATCH v4 0/5] drivers: bus: Add Simple Power-Managed Bus Geert Uytterhoeven
2015-01-26 16:16 ` [PATCH v4 1/5] drivers: bus: Sort Kconfig entries alphabetically Geert Uytterhoeven
2015-01-26 16:16 ` [PATCH v4 2/5] drivers: bus: Sort Makefile " Geert Uytterhoeven
2015-01-26 16:16 ` [PATCH v4 3/5] drivers: bus: Add Simple Power-Managed Bus DT Bindings Geert Uytterhoeven
2015-01-27 18:17 ` Mark Rutland
2015-01-28 15:38 ` Geert Uytterhoeven
2015-01-26 16:16 ` [PATCH v4 4/5] drivers: bus: Add Renesas Bus State Controller (BSC) " Geert Uytterhoeven
2015-01-26 16:16 ` Geert Uytterhoeven [this message]
2015-01-30 9:34 ` [PATCH v4 5/5] drivers: bus: Add Simple Power-Managed Bus Driver Ulf Hansson
2015-02-01 9:36 ` Geert Uytterhoeven
2015-01-27 17:42 ` [PATCH v4 0/5] drivers: bus: Add Simple Power-Managed Bus Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1422288977-20353-6-git-send-email-geert+renesas@glider.be \
--to=geert+renesas@glider.be \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).