[PATCH] ARM: shmobile: r8a7791: Correct SDHI clock labels and output-names

[Simon Horman <horms+renesas@verge.net.au>]

There appears to have been some inconsistency and confusion here as on
the r8a7790 these clocks are referred to as SD(HI)1 and SD(HI)2 while on
the r8a7791 and r8a7794 they are referred to as SD(HI)2 and SD(HI)3.

Fixes: 59e79895b95892863 ("ARM: shmobile: r8a7791: Add clocks")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

---

This follows the naming pattern of "ARM: shmobile: r8a7794: Correct SDHI
clock base address, labels and output-names".
---
 arch/arm/boot/dts/r8a7791.dtsi | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 6b0cd1b..86862a5 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -880,19 +880,19 @@
 		};
 
 		/* Variable factor clocks */
-		sd1_clk: sd2_clk@e6150078 {
+		sd2_clk: sd2_clk@e6150078 {
 			compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0 0xe6150078 0 4>;
 			clocks = <&pll1_div2_clk>;
 			#clock-cells = <0>;
-			clock-output-names = "sd1";
+			clock-output-names = "sd2";
 		};
-		sd2_clk: sd3_clk@e615026c {
+		sd3_clk: sd3_clk@e615026c {
 			compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock";
 			reg = <0 0xe615026c 0 4>;
 			clocks = <&pll1_div2_clk>;
 			#clock-cells = <0>;
-			clock-output-names = "sd2";
+			clock-output-names = "sd3";
 		};
 		mmc0_clk: mmc0_clk@e6150240 {
 			compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock";
@@ -1113,7 +1113,7 @@
 		mstp3_clks: mstp3_clks@e615013c {
 			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>;
-			clocks = <&cp_clk>, <&sd2_clk>, <&sd1_clk>, <&cpg_clocks R8A7791_CLK_SD0>,
+			clocks = <&cp_clk>, <&sd3_clk>, <&sd2_clk>, <&cpg_clocks R8A7791_CLK_SD0>,
 				 <&mmc0_clk>, <&hp_clk>, <&mp_clk>, <&hp_clk>, <&mp_clk>, <&rclk_clk>,
 				 <&hp_clk>, <&hp_clk>;
 			#clock-cells = <1>;
-- 
2.1.4