[PATCH v2 14/15] ARM: shmobile: bockw dts: Move Ethernet node to BSC

[Ulrich Hecht <ulrich.hecht+renesas@gmail.com>]

Move the Ethernet node to the new BSC node, as its connected to the
Bus State Controller.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
---
 arch/arm/boot/dts/r8a7778-bockw.dts | 25 ++++++++++++++-----------
 1 file changed, 14 insertions(+), 11 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7778-bockw.dts b/arch/arm/boot/dts/r8a7778-bockw.dts
index 194ffbd..2b4b84b 100644
--- a/arch/arm/boot/dts/r8a7778-bockw.dts
+++ b/arch/arm/boot/dts/r8a7778-bockw.dts
@@ -46,17 +46,6 @@
 		regulator-always-on;
 	};
 
-	ethernet@18300000 {
-		compatible = "smsc,lan9220", "smsc,lan9115";
-		reg = <0x18300000 0x1000>;
-
-		phy-mode = "mii";
-		interrupt-parent = <&irqpin>;
-		interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
-		reg-io-width = <4>;
-		vddvario-supply = <&fixedregulator3v3>;
-		vdd33a-supply = <&fixedregulator3v3>;
-	};
 
 	sound {
 		compatible = "simple-audio-card";
@@ -76,6 +65,20 @@
 	};
 };
 
+&bsc {
+	ethernet@18300000 {
+		compatible = "smsc,lan9220", "smsc,lan9115", "smsc,lan89218";
+		reg = <0x18300000 0x1000>;
+
+		phy-mode = "mii";
+		interrupt-parent = <&irqpin>;
+		interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+		reg-io-width = <4>;
+		vddvario-supply = <&fixedregulator3v3>;
+		vdd33a-supply = <&fixedregulator3v3>;
+	};
+};
+
 &ether {
 	pinctrl-0 = <&ether_pins>;
 	pinctrl-names = "default";
-- 
2.2.2