From mboxrd@z Thu Jan 1 00:00:00 1970 From: Yoshihiro Kaneko Date: Sun, 15 Mar 2015 14:33:38 +0000 Subject: [PATCH/RFC] v4l: vsp1: Change VSP1 LIF linebuffer FIFO Message-Id: <1426430018-3172-1-git-send-email-ykaneko0929@gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-media@vger.kernel.org Cc: Mauro Carvalho Chehab , Laurent Pinchart , Simon Horman , Magnus Damm , linux-sh@vger.kernel.org From: Yoshifumi Hosoya Change to VSPD hardware recommended value. Purpose is highest pixel clock without underruns. In the default R-Car Linux BSP config this value is wrong and therefore there are many underruns. Here are the original settings: HBTH = 1300 (VSPD stops when 1300 pixels are buffered) LBTH = 200 (VSPD resumes when buffer level has decreased below 200 pixels) The display underruns can be eliminated by applying the following settings: HBTH = 1504 LBTH = 1248 Reported-by: Peter Fiedler Signed-off-by: Yoshifumi Hosoya Signed-off-by: Yoshihiro Kaneko --- This patch is based on the master branch of linuxtv.org/media_tree.git. drivers/media/platform/vsp1/vsp1_lif.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/media/platform/vsp1/vsp1_lif.c b/drivers/media/platform/vsp1/vsp1_lif.c index 17a6ca7..7d0f7eb 100644 --- a/drivers/media/platform/vsp1/vsp1_lif.c +++ b/drivers/media/platform/vsp1/vsp1_lif.c @@ -1,7 +1,7 @@ /* * vsp1_lif.c -- R-Car VSP1 LCD Controller Interface * - * Copyright (C) 2013-2014 Renesas Electronics Corporation + * Copyright (C) 2013-2015 Renesas Electronics Corporation * * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com) * @@ -44,9 +44,9 @@ static int lif_s_stream(struct v4l2_subdev *subdev, int enable) { const struct v4l2_mbus_framefmt *format; struct vsp1_lif *lif = to_lif(subdev); - unsigned int hbth = 1300; - unsigned int obth = 400; - unsigned int lbth = 200; + unsigned int hbth = 1536; + unsigned int obth = 128; + unsigned int lbth = 1520; if (!enable) { vsp1_lif_write(lif, VI6_LIF_CTRL, 0); -- 1.9.1