linux-sh.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Yoshinori Sato <ysato@users.sourceforge.jp>
To: linux-sh@vger.kernel.org
Subject: [RFC] sh-sci: Add CONFIG_SERIAL_EARLYCON support
Date: Sun, 07 Jun 2015 09:28:27 +0000	[thread overview]
Message-ID: <1433669307-19478-1-git-send-email-ysato@users.sourceforge.jp> (raw)

Hello.

"earlyprintk" is architecture specific option.
I think general "earlycon" option support more better.

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
---
 drivers/tty/serial/Kconfig  |  6 ++++
 drivers/tty/serial/sh-sci.c | 70 +++++++++++++++++++++++++++++++++++++++++++--
 2 files changed, 73 insertions(+), 3 deletions(-)

diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index dea1eff..b4c9820 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -741,6 +741,12 @@ config SERIAL_SH_SCI_CONSOLE
 	depends on SERIAL_SH_SCI=y
 	select SERIAL_CORE_CONSOLE
 
+config SERIAL_SH_SCI_EARLYCON
+	bool "Support for early console on SuperH SCI(F)"
+	depends on SERIAL_SH_SCI=y
+	select SERIAL_CORE_CONSOLE
+	select SERIAL_EARLYCON
+
 config SERIAL_SH_SCI_DMA
 	bool "DMA support"
 	depends on SERIAL_SH_SCI && SH_DMAE
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 95772cf..6eb82e1 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -466,7 +466,8 @@ static void sci_port_disable(struct sci_port *sci_port)
 	pm_runtime_put_sync(sci_port->port.dev);
 }
 
-#if defined(CONFIG_CONSOLE_POLL) || defined(CONFIG_SERIAL_SH_SCI_CONSOLE)
+#if defined(CONFIG_CONSOLE_POLL) || defined(CONFIG_SERIAL_SH_SCI_CONSOLE) \
+	|| defined(CONFIG_SERIAL_EARLYCON)
 
 #ifdef CONFIG_CONSOLE_POLL
 static int sci_poll_get_char(struct uart_port *port)
@@ -2339,7 +2340,7 @@ static void sci_cleanup_single(struct sci_port *port)
 	pm_runtime_disable(port->port.dev);
 }
 
-#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
+#if defined(CONFIG_SERIAL_SH_SCI_CONSOLE) || defined(CONFIG_SERIAL_EARLYCON)
 static void serial_console_putchar(struct uart_port *port, int ch)
 {
 	sci_poll_put_char(port, ch);
@@ -2359,9 +2360,12 @@ static void serial_console_write(struct console *co, const char *s,
 	int locked = 1;
 
 	local_irq_save(flags);
+#if defined(SUPPORT_SYSRQ)
 	if (port->sysrq)
 		locked = 0;
-	else if (oops_in_progress)
+	else
+#endif
+	if (oops_in_progress)
 		locked = spin_trylock(&port->lock);
 	else
 		spin_lock(&port->lock);
@@ -2719,6 +2723,66 @@ static void __exit sci_exit(void)
 early_platform_init_buffer("earlyprintk", &sci_driver,
 			   early_serial_buf, ARRAY_SIZE(early_serial_buf));
 #endif
+#ifdef CONFIG_SERIAL_EARLYCON
+static struct __init plat_sci_port port_cfg;
+
+static int __init early_console_setup(struct earlycon_device *device,
+				      int type)
+{
+	if (!device->port.membase)
+		return -ENODEV;
+
+	device->port.serial_in = sci_serial_in;
+	device->port.serial_out	= sci_serial_out;
+	device->port.type = type;
+	memcpy(&sci_ports[0].port, &device->port, sizeof(struct uart_port));
+	sci_ports[0].cfg = &port_cfg;
+	sci_ports[0].cfg->type = type;
+	sci_probe_regmap(sci_ports[0].cfg);
+	port_cfg.scscr = SCSCR_RE | SCSCR_TE;
+	sci_serial_out(&sci_ports[0].port, SCSCR, port_cfg.scscr);
+
+	device->con->write = serial_console_write;
+	return 0;
+}
+static int __init sci_early_console_setup(struct earlycon_device *device,
+					  const char *opt)
+{
+	return early_console_setup(device, PORT_SCI);
+}
+static int __init scif_early_console_setup(struct earlycon_device *device,
+					  const char *opt)
+{
+	return early_console_setup(device, PORT_SCIF);
+}
+static int __init scifa_early_console_setup(struct earlycon_device *device,
+					  const char *opt)
+{
+	return early_console_setup(device, PORT_SCIFA);
+}
+static int __init scifb_early_console_setup(struct earlycon_device *device,
+					  const char *opt)
+{
+	return early_console_setup(device, PORT_SCIFB);
+}
+static int __init hscif_early_console_setup(struct earlycon_device *device,
+					  const char *opt)
+{
+	return early_console_setup(device, PORT_HSCIF);
+}
+
+EARLYCON_DECLARE(sci, sci_early_console_setup);
+OF_EARLYCON_DECLARE(sci, "renesas,sci", sci_early_console_setup);
+EARLYCON_DECLARE(scif, scif_early_console_setup);
+OF_EARLYCON_DECLARE(scif, "renesas,scif", scif_early_console_setup);
+EARLYCON_DECLARE(scifa, scifa_early_console_setup);
+OF_EARLYCON_DECLARE(scifa, "renesas,scifa", scifa_early_console_setup);
+EARLYCON_DECLARE(scifb, scifb_early_console_setup);
+OF_EARLYCON_DECLARE(scifb, "renesas,scifb", scifb_early_console_setup);
+EARLYCON_DECLARE(hscif, hscif_early_console_setup);
+OF_EARLYCON_DECLARE(hscif, "renesas,hscif", hscif_early_console_setup);
+#endif
+
 module_init(sci_init);
 module_exit(sci_exit);
 
-- 
2.1.4


             reply	other threads:[~2015-06-07  9:28 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-06-07  9:28 Yoshinori Sato [this message]
2015-08-13 11:05 ` [RFC] sh-sci: Add CONFIG_SERIAL_EARLYCON support Geert Uytterhoeven

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1433669307-19478-1-git-send-email-ysato@users.sourceforge.jp \
    --to=ysato@users.sourceforge.jp \
    --cc=linux-sh@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).