From mboxrd@z Thu Jan 1 00:00:00 1970 From: Geert Uytterhoeven Date: Wed, 17 Jun 2015 13:03:32 +0000 Subject: [PATCH 1/5] ARM: shmobile: r8a73a4 dtsi: Use "arm,gic-400" for GIC Message-Id: <1434546216-10773-2-git-send-email-geert+renesas@glider.be> List-Id: References: <1434546216-10773-1-git-send-email-geert+renesas@glider.be> In-Reply-To: <1434546216-10773-1-git-send-email-geert+renesas@glider.be> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-arm-kernel@lists.infradead.org Replace the "arm,cortex-a15-gic" compatible value for the GIC by "arm,gic-400", as the documentation states it's a GIC-400. This has been confirmed by reading the GICD_IIDR register, which reports 0x0200043b (GIC-400 = 0x02, ARM = 0x43b). This has no effect on runtime behavior, as currently the GIC driver treats both compatible values the same. Signed-off-by: Geert Uytterhoeven --- You can read the GICD_IIDR register from U-Boot using md 0xf1001008 1 --- arch/arm/boot/dts/r8a73a4.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi index 7ee22a41c6c97488..5090d1a8f652e8be 100644 --- a/arch/arm/boot/dts/r8a73a4.dtsi +++ b/arch/arm/boot/dts/r8a73a4.dtsi @@ -434,7 +434,7 @@ }; gic: interrupt-controller@f1001000 { - compatible = "arm,cortex-a15-gic"; + compatible = "arm,gic-400"; #interrupt-cells = <3>; #address-cells = <0>; interrupt-controller; -- 1.9.1