[PATCH 3/4] i2c: sh_mobile: use adapter default for timeout

[Wolfram Sang <wsa@the-dreams.de>]

From: Wolfram Sang <wsa+renesas@sang-engineering.com>

5 seconds is a very large timeout, and it is hardcoded. Use the default
timeout from 'struct adapter' which is 1 second. It can also be modified
from userspace for specific workloads via i2c-dev.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
 drivers/i2c/busses/i2c-sh_mobile.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c
index 7193bcfdd94013..5490bfb58f3e80 100644
--- a/drivers/i2c/busses/i2c-sh_mobile.c
+++ b/drivers/i2c/busses/i2c-sh_mobile.c
@@ -751,7 +751,7 @@ static int sh_mobile_i2c_xfer(struct i2c_adapter *adapter,
 		/* The interrupt handler takes care of the rest... */
 		k = wait_event_timeout(pd->wait,
 				       pd->sr & (ICSR_TACK | SW_DONE),
-				       5 * HZ);
+				       adapter->timeout);
 		if (!k) {
 			dev_err(pd->dev, "Transfer request timed out\n");
 			if (pd->dma_direction != DMA_NONE)
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-sh" in