From: Wolfram Sang <wsa@the-dreams.de>
To: linux-i2c@vger.kernel.org
Cc: linux-sh@vger.kernel.org, Magnus Damm <magnus.damm@gmail.com>,
Simon Horman <horms@verge.net.au>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Geert Uytterhoeven <geert@linux-m68k.org>,
Wolfram Sang <wsa@the-dreams.de>,
Kuninori Morimoto <kuninori.morimoto.gx@gmail.com>,
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Subject: [PATCH v3 11/11] i2c: rcar: handle difference in setting up non-first message
Date: Thu, 19 Nov 2015 15:56:51 +0000 [thread overview]
Message-ID: <1447948611-2615-12-git-send-email-wsa@the-dreams.de> (raw)
In-Reply-To: <1447948611-2615-1-git-send-email-wsa@the-dreams.de>
Signed-off-by: Ryo Kataoka <ryo.kataoka.wt@renesas.com>
Signed-off-by: Hiromitsu Yamasaki <hiromitsu.yamasaki.ym@renesas.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
---
drivers/i2c/busses/i2c-rcar.c | 21 ++++++++++++++++-----
1 file changed, 16 insertions(+), 5 deletions(-)
diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c
index e71fd4090247aa..3ed1f0aa5eeb16 100644
--- a/drivers/i2c/busses/i2c-rcar.c
+++ b/drivers/i2c/busses/i2c-rcar.c
@@ -92,6 +92,7 @@
#define RCAR_IRQ_ACK_RECV (~(MAT | MDR) & 0xFF)
#define ID_LAST_MSG (1 << 0)
+#define ID_FIRST_MSG (1 << 1)
#define ID_DONE (1 << 2)
#define ID_ARBLOST (1 << 3)
#define ID_NACK (1 << 4)
@@ -254,13 +255,22 @@ static void rcar_i2c_prepare_msg(struct rcar_i2c_priv *priv)
int read = !!rcar_i2c_is_recv(priv);
priv->pos = 0;
- priv->flags = 0;
if (priv->msgs_left = 1)
rcar_i2c_flags_set(priv, ID_LAST_MSG);
rcar_i2c_write(priv, ICMAR, (priv->msg->addr << 1) | read);
- rcar_i2c_write(priv, ICMSR, 0);
- rcar_i2c_write(priv, ICMCR, RCAR_BUS_PHASE_START);
+ /*
+ * We don't have a testcase but the HW engineers say that the write order
+ * of ICMSR and ICMCR depends on whether we issue START or REP_START. Since
+ * it didn't cause a drawback for me, let's rather be safe than sorry.
+ */
+ if (rcar_i2c_flags_has(priv, ID_FIRST_MSG)) {
+ rcar_i2c_write(priv, ICMSR, 0);
+ rcar_i2c_write(priv, ICMCR, RCAR_BUS_PHASE_START);
+ } else {
+ rcar_i2c_write(priv, ICMCR, RCAR_BUS_PHASE_START);
+ rcar_i2c_write(priv, ICMSR, 0);
+ }
rcar_i2c_write(priv, ICMIER, read ? RCAR_IRQ_RECV : RCAR_IRQ_SEND);
}
@@ -268,6 +278,7 @@ static void rcar_i2c_next_msg(struct rcar_i2c_priv *priv)
{
priv->msg++;
priv->msgs_left--;
+ priv->flags = 0;
rcar_i2c_prepare_msg(priv);
}
@@ -482,10 +493,10 @@ static int rcar_i2c_master_xfer(struct i2c_adapter *adap,
}
}
- /* init data */
+ /* init first message */
priv->msg = msgs;
priv->msgs_left = num;
-
+ priv->flags = ID_FIRST_MSG;
rcar_i2c_prepare_msg(priv);
time_left = wait_event_timeout(priv->wait,
--
2.1.4
next prev parent reply other threads:[~2015-11-19 15:56 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-19 15:56 [PATCH v3 00/11] i2c: rcar: tackle race conditions in the driver Wolfram Sang
2015-11-19 15:56 ` [PATCH v3 01/11] i2c: rcar: make sure clocks are on when doing clock calculation Wolfram Sang
2015-11-19 15:56 ` [PATCH v3 02/11] i2c: rcar: rework hw init Wolfram Sang
2015-11-19 15:56 ` [PATCH v3 03/11] i2c: rcar: remove unused IOERROR state Wolfram Sang
2015-11-19 15:56 ` [PATCH v3 04/11] i2c: rcar: remove spinlock Wolfram Sang
2015-11-19 15:56 ` [PATCH v3 05/11] i2c: rcar: refactor setup of a msg Wolfram Sang
2015-11-19 15:56 ` [PATCH v3 06/11] i2c: rcar: init new messages in irq Wolfram Sang
2015-11-19 15:56 ` [PATCH v3 07/11] i2c: rcar: don't issue stop when HW does it automatically Wolfram Sang
2015-11-19 15:56 ` [PATCH v3 08/11] i2c: rcar: check master irqs before slave irqs Wolfram Sang
2015-11-19 15:56 ` [PATCH v3 09/11] i2c: rcar: revoke START request early Wolfram Sang
2016-03-31 21:02 ` Sergei Shtylyov
2016-03-31 22:48 ` Wolfram Sang
2016-04-01 19:55 ` Sergei Shtylyov
2016-04-01 20:14 ` Wolfram Sang
2016-04-01 23:05 ` Sergei Shtylyov
2016-04-02 7:27 ` Wolfram Sang
2016-04-02 12:51 ` Sergei Shtylyov
2016-04-03 8:25 ` Wolfram Sang
2016-04-03 13:35 ` Sergei Shtylyov
2016-04-03 13:47 ` Wolfram Sang
2015-11-19 15:56 ` [PATCH v3 10/11] i2c: rcar: clean up after refactoring Wolfram Sang
2015-11-19 15:56 ` Wolfram Sang [this message]
2015-11-19 16:01 ` [PATCH v3 00/11] i2c: rcar: tackle race conditions in the driver Laurent Pinchart
2015-11-30 13:27 ` Wolfram Sang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1447948611-2615-12-git-send-email-wsa@the-dreams.de \
--to=wsa@the-dreams.de \
--cc=geert@linux-m68k.org \
--cc=horms@verge.net.au \
--cc=kuninori.morimoto.gx@gmail.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-sh@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=yoshihiro.shimoda.uh@renesas.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).