[PATCH 18/25] serial: sh-sci: Prepare for multiple clocks and baud rate generators

[Geert Uytterhoeven <geert+renesas@glider.be>]

Refactor the clock and baud rate parameter code to ease adding support
for multiple clocks and baud rate generators later.
sci_scbrr_calc() now returns the bit rate error, so it can be compared
to the bit rate error for other baud rate generators.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 drivers/tty/serial/sh-sci.c | 176 ++++++++++++++++++++++++++++++--------------
 1 file changed, 120 insertions(+), 56 deletions(-)

diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 726c96d5a511c222..12800e52f41953dc 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -2,6 +2,7 @@
  * SuperH on-chip serial module support.  (SCI with no FIFO / with FIFO)
  *
  *  Copyright (C) 2002 - 2011  Paul Mundt
+ *  Copyright (C) 2015 Glider bvba
  *  Modified to support SH7720 SCIF. Markus Brunner, Mark Jonas (Jul 2007).
  *
  * based off of the old drivers/char/sh-sci.c by:
@@ -76,6 +77,11 @@ enum {
 	((port)->irqs[SCIx_ERI_IRQ] &&	\
 	 ((port)->irqs[SCIx_RXI_IRQ] < 0))
 
+enum SCI_CLKS {
+	SCI_FCK,		/* Functional Clock */
+	SCI_NUM_CLKS
+};
+
 struct sci_port {
 	struct uart_port	port;
 
@@ -92,8 +98,9 @@ struct sci_port {
 	struct timer_list	break_timer;
 	int			break_flag;
 
-	/* Function clock */
-	struct clk		*fclk;
+	/* Clocks */
+	struct clk		*clks[SCI_NUM_CLKS];
+	unsigned long		clk_rates[SCI_NUM_CLKS];
 
 	int			irqs[SCIx_NR_IRQS];
 	char			*irqstr[SCIx_NR_IRQS];
@@ -496,17 +503,24 @@ static int sci_probe_regmap(struct plat_sci_port *cfg)
 
 static void sci_port_enable(struct sci_port *sci_port)
 {
+	unsigned int i;
+
 	if (!sci_port->port.dev)
 		return;
 
 	pm_runtime_get_sync(sci_port->port.dev);
 
-	clk_prepare_enable(sci_port->fclk);
-	sci_port->port.uartclk = clk_get_rate(sci_port->fclk);
+	for (i = 0; i < SCI_NUM_CLKS; i++) {
+		clk_prepare_enable(sci_port->clks[i]);
+		sci_port->clk_rates[i] = clk_get_rate(sci_port->clks[i]);
+	}
+	sci_port->port.uartclk = sci_port->clk_rates[SCI_FCK];
 }
 
 static void sci_port_disable(struct sci_port *sci_port)
 {
+	unsigned int i;
+
 	if (!sci_port->port.dev)
 		return;
 
@@ -518,7 +532,8 @@ static void sci_port_disable(struct sci_port *sci_port)
 	del_timer_sync(&sci_port->break_timer);
 	sci_port->break_flag = 0;
 
-	clk_disable_unprepare(sci_port->fclk);
+	for (i = SCI_NUM_CLKS; i-- > 0; )
+		clk_disable_unprepare(sci_port->clks[i]);
 
 	pm_runtime_put_sync(sci_port->port.dev);
 }
@@ -1657,6 +1672,7 @@ static int sci_notifier(struct notifier_block *self,
 {
 	struct sci_port *sci_port;
 	unsigned long flags;
+	unsigned int i;
 
 	sci_port = container_of(self, struct sci_port, freq_transition);
 
@@ -1664,7 +1680,9 @@ static int sci_notifier(struct notifier_block *self,
 		struct uart_port *port = &sci_port->port;
 
 		spin_lock_irqsave(&port->lock, flags);
-		port->uartclk = clk_get_rate(sci_port->fclk);
+		for (i = 0; i < SCI_NUM_CLKS; i++)
+			sci_port->clk_rates[i] +				clk_get_rate(sci_port->clks[i]);
 		spin_unlock_irqrestore(&port->lock, flags);
 	}
 
@@ -1907,11 +1925,12 @@ static void sci_shutdown(struct uart_port *port)
 }
 
 /* calculate sample rate, BRR, and clock select */
-static void sci_scbrr_calc(struct sci_port *s, unsigned int bps,
-			   unsigned long freq, int *brr, unsigned int *srr,
-			   unsigned int *cks)
+static int sci_scbrr_calc(struct sci_port *s, unsigned int bps,
+			  unsigned int *brr, unsigned int *srr,
+			  unsigned int *cks)
 {
 	unsigned int min_sr, max_sr, shift, sr, br, a, b, c;
+	unsigned long freq = s->clk_rates[SCI_FCK];
 	int err, min_err = INT_MAX;
 
 	if (s->sampling_rate) {
@@ -1963,6 +1982,7 @@ static void sci_scbrr_calc(struct sci_port *s, unsigned int bps,
 
 	dev_dbg(s->port.dev, "BRR: %u%+d bps using N %u SR %u cks %u\n", bps,
 		min_err, *brr, *srr + 1, *cks);
+	return min_err;
 }
 
 static void sci_reset(struct uart_port *port)
@@ -1984,11 +2004,14 @@ static void sci_reset(struct uart_port *port)
 static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
 			    struct ktermios *old)
 {
+	unsigned int baud, smr_val = 0, scr_val = 0, i;
+	unsigned int brr = 255, cks = 0, srr = 15;
+	unsigned int brr1 = 255, cks1 = 0, srr1 = 15;
 	struct sci_port *s = to_sci_port(port);
 	const struct plat_sci_reg *reg;
-	unsigned int baud, smr_val = 0, max_baud, cks = 0;
-	int t = -1;
-	unsigned int srr = 15;
+	int min_err = INT_MAX, err;
+	unsigned long max_freq = 0;
+	int best_clk = -1;
 
 	if ((termios->c_cflag & CSIZE) = CS7)
 		smr_val |= SCSMR_CHR;
@@ -2007,35 +2030,59 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
 	 * that the previous boot loader has enabled required clocks and
 	 * setup the baud rate generator hardware for us already.
 	 */
-	if (port->uartclk)
-		max_baud = port->uartclk / max(s->sampling_rate, 8U);
-	else
-		max_baud = 115200;
+	if (!port->uartclk) {
+		baud = uart_get_baud_rate(port, termios, old, 0, 115200);
+		goto done;
+	}
 
-	baud = uart_get_baud_rate(port, termios, old, 0, max_baud);
-	if (likely(baud && port->uartclk))
-		sci_scbrr_calc(s, baud, port->uartclk, &t, &srr, &cks);
+	for (i = 0; i < SCI_NUM_CLKS; i++)
+		max_freq = max(max_freq, s->clk_rates[i]);
+
+	baud = uart_get_baud_rate(port, termios, old, 0,
+				  max_freq / max(s->sampling_rate, 8U));
+	if (!baud)
+		goto done;
+
+	/* Functional Clock and standard Bit Rate Register */
+	err = sci_scbrr_calc(s, baud, &brr1, &srr1, &cks1);
+	if (abs(err) < abs(min_err)) {
+		best_clk = SCI_FCK;
+		min_err = err;
+		brr = brr1;
+		srr = srr1;
+		cks = cks1;
+	}
+
+done:
+	if (best_clk >= 0)
+		dev_dbg(port->dev, "Using clk %pC for %u%+d bps\n",
+			s->clks[best_clk], baud, min_err);
 
 	sci_port_enable(s);
 
 	sci_reset(port);
 
-	smr_val |= serial_port_in(port, SCSMR) & SCSMR_CKS;
-
 	uart_update_timeout(port, termios->c_cflag, baud);
 
-	dev_dbg(port->dev, "%s: SMR %x, cks %x, t %x, SCSCR %x\n",
-		__func__, smr_val, cks, t, s->cfg->scscr);
-
-	if (t >= 0) {
-		serial_port_out(port, SCSMR, (smr_val & ~SCSMR_CKS) | cks);
-		serial_port_out(port, SCBRR, t);
-		reg = sci_getreg(port, HSSRR);
-		if (reg->size)
+	if (best_clk >= 0) {
+		smr_val |= cks;
+		dev_dbg(port->dev, "SMR 0x%x BRR %u SRR %u\n", smr_val, brr,
+			srr);
+		serial_port_out(port, SCSMR, smr_val);
+		serial_port_out(port, SCBRR, brr);
+		if (sci_getreg(port, HSSRR)->size)
 			serial_port_out(port, HSSRR, srr | HSCIF_SRE);
-		udelay((1000000+(baud-1)) / baud); /* Wait one bit interval */
-	} else
+
+		/* Wait one bit interval */
+		udelay((1000000 + (baud - 1)) / baud);
+	} else {
+		/* Don't touch the bit rate configuration */
+		scr_val = s->cfg->scscr & (SCSCR_CKE1 | SCSCR_CKE0);
+		smr_val |= serial_port_in(port, SCSMR) & SCSMR_CKS;
+		dev_dbg(port->dev, "SCR 0x%x SMR 0x%x\n", scr_val, smr_val);
+		serial_port_out(port, SCSCR, scr_val);
 		serial_port_out(port, SCSMR, smr_val);
+	}
 
 	sci_init_pins(port, termios->c_cflag);
 
@@ -2060,7 +2107,9 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
 		serial_port_out(port, SCFCR, ctrl);
 	}
 
-	serial_port_out(port, SCSCR, s->cfg->scscr);
+	scr_val |= s->cfg->scscr & ~(SCSCR_CKE1 | SCSCR_CKE0);
+	dev_dbg(port->dev, "SCSCR 0x%x\n", scr_val);
+	serial_port_out(port, SCSCR, scr_val);
 
 #ifdef CONFIG_SERIAL_SH_SCI_DMA
 	/*
@@ -2252,33 +2301,48 @@ static struct uart_ops sci_uart_ops = {
 
 static int sci_init_clocks(struct sci_port *sci_port, struct device *dev)
 {
-	/* Get the SCI functional clock. It's called "fck" on ARM. */
-	sci_port->fclk = devm_clk_get(dev, "fck");
-	if (PTR_ERR(sci_port->fclk) = -EPROBE_DEFER)
-		return -EPROBE_DEFER;
-	if (!IS_ERR(sci_port->fclk))
-		return 0;
+	const char *clk_names[] = {
+		[SCI_FCK] = "fck",
+	};
+	struct clk *clk;
+	unsigned int i;
 
-	/*
-	 * But it used to be called "sci_ick", and we need to maintain DT
-	 * backward compatibility.
-	 */
-	sci_port->fclk = devm_clk_get(dev, "sci_ick");
-	if (PTR_ERR(sci_port->fclk) = -EPROBE_DEFER)
-		return -EPROBE_DEFER;
-	if (!IS_ERR(sci_port->fclk))
-		return 0;
+	for (i = 0; i < SCI_NUM_CLKS; i++) {
+		clk = devm_clk_get(dev, clk_names[i]);
+		if (PTR_ERR(clk) = -EPROBE_DEFER)
+			return -EPROBE_DEFER;
 
-	/*
-	 * Not all SH platforms declare a clock lookup entry for SCI devices,
-	 * in which case we need to get the global "peripheral_clk" clock.
-	 */
-	sci_port->fclk = devm_clk_get(dev, "peripheral_clk");
-	if (!IS_ERR(sci_port->fclk))
-		return 0;
+		if (IS_ERR(clk) && i = SCI_FCK) {
+			/*
+			 * "fck" used to be called "sci_ick", and we need to
+			 * maintain DT backward compatibility.
+			 */
+			clk = devm_clk_get(dev, "sci_ick");
+			if (PTR_ERR(clk) = -EPROBE_DEFER)
+				return -EPROBE_DEFER;
+
+			if (!IS_ERR(clk))
+				goto found;
+
+			/*
+			 * Not all SH platforms declare a clock lookup entry
+			 * for SCI devices, in which case we need to get the
+			 * global "peripheral_clk" clock.
+			 */
+			clk = devm_clk_get(dev, "peripheral_clk");
+			if (!IS_ERR(clk))
+				goto found;
+
+			dev_err(dev, "failed to get functional clock\n");
+			return PTR_ERR(clk);
+		}
 
-	dev_err(dev, "failed to get functional clock\n");
-	return PTR_ERR(sci_port->fclk);
+found:
+		if (!IS_ERR(clk))
+			dev_dbg(dev, "clk %u is %pC rate %pCr\n", i, clk, clk);
+		sci_port->clks[i] = IS_ERR(clk) ? NULL : clk;
+	}
+	return 0;
 }
 
 static int sci_init_single(struct platform_device *dev,
-- 
1.9.1