From: Geert Uytterhoeven <geert+renesas@glider.be>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Simon Horman <horms@verge.net.au>,
Magnus Damm <magnus.damm@gmail.com>,
Yoshinori Sato <ysato@users.sourceforge.jp>,
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: linux-serial@vger.kernel.org, linux-sh@vger.kernel.org,
linux-kernel@vger.kernel.org,
Geert Uytterhoeven <geert+renesas@glider.be>
Subject: [PATCH 23/25] arm64: renesas: r8a7795 dtsi: Add BRG support for (H)SCIF
Date: Thu, 19 Nov 2015 18:39:02 +0000 [thread overview]
Message-ID: <1447958344-836-24-git-send-email-geert+renesas@glider.be> (raw)
In-Reply-To: <1447958344-836-1-git-send-email-geert+renesas@glider.be>
Add the device node for the external SCIF_CLK.
The presence of the SCIF_CLK crystal and its clock frequency depend on
the actual board.
Add the two optional clock sources (ZS_CLK and SCIF_CLK for the internal
resp. external clock) for the Baud Rate Generator for External Clock
(BRG) to all SCIF and HSCIF device nodes.
This increases the range and accuracy of supported baud rates on
(H)SCIF.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
arch/arm64/boot/dts/renesas/r8a7795.dtsi | 74 ++++++++++++++++++++++----------
1 file changed, 52 insertions(+), 22 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
index 53a2a8fb42b7480c..25900761cfde201e 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
@@ -84,6 +84,14 @@
status = "disabled";
};
+ /* External SCIF clock - to be overridden by boards that provide it */
+ scif_clk: scif {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ status = "disabled";
+ };
+
soc {
compatible = "simple-bus";
interrupt-parent = <&gic>;
@@ -362,8 +370,10 @@
compatible = "renesas,hscif-r8a7795", "renesas,hscif";
reg = <0 0xe6540000 0 96>;
interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 520>;
- clock-names = "fck";
+ clocks = <&cpg CPG_MOD 520>,
+ <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+ <&scif_clk>;
+ clock-names = "fck", "int_clk", "scif_clk";
dmas = <&dmac1 0x31>, <&dmac1 0x30>;
dma-names = "tx", "rx";
power-domains = <&cpg>;
@@ -374,8 +384,10 @@
compatible = "renesas,hscif-r8a7795", "renesas,hscif";
reg = <0 0xe6550000 0 96>;
interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 519>;
- clock-names = "fck";
+ clocks = <&cpg CPG_MOD 519>,
+ <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+ <&scif_clk>;
+ clock-names = "fck", "int_clk", "scif_clk";
dmas = <&dmac1 0x33>, <&dmac1 0x32>;
dma-names = "tx", "rx";
power-domains = <&cpg>;
@@ -386,8 +398,10 @@
compatible = "renesas,hscif-r8a7795", "renesas,hscif";
reg = <0 0xe6560000 0 96>;
interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 518>;
- clock-names = "fck";
+ clocks = <&cpg CPG_MOD 518>,
+ <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+ <&scif_clk>;
+ clock-names = "fck", "int_clk", "scif_clk";
dmas = <&dmac1 0x35>, <&dmac1 0x34>;
dma-names = "tx", "rx";
power-domains = <&cpg>;
@@ -398,8 +412,10 @@
compatible = "renesas,hscif-r8a7795", "renesas,hscif";
reg = <0 0xe66a0000 0 96>;
interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 517>;
- clock-names = "fck";
+ clocks = <&cpg CPG_MOD 517>,
+ <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+ <&scif_clk>;
+ clock-names = "fck", "int_clk", "scif_clk";
dmas = <&dmac0 0x37>, <&dmac0 0x36>;
dma-names = "tx", "rx";
power-domains = <&cpg>;
@@ -410,8 +426,10 @@
compatible = "renesas,hscif-r8a7795", "renesas,hscif";
reg = <0 0xe66b0000 0 96>;
interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 516>;
- clock-names = "fck";
+ clocks = <&cpg CPG_MOD 516>,
+ <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+ <&scif_clk>;
+ clock-names = "fck", "int_clk", "scif_clk";
dmas = <&dmac0 0x39>, <&dmac0 0x38>;
dma-names = "tx", "rx";
power-domains = <&cpg>;
@@ -422,8 +440,10 @@
compatible = "renesas,scif-r8a7795", "renesas,scif";
reg = <0 0xe6e60000 0 64>;
interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 207>;
- clock-names = "fck";
+ clocks = <&cpg CPG_MOD 207>,
+ <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+ <&scif_clk>;
+ clock-names = "fck", "int_clk", "scif_clk";
dmas = <&dmac1 0x51>, <&dmac1 0x50>;
dma-names = "tx", "rx";
power-domains = <&cpg>;
@@ -434,8 +454,10 @@
compatible = "renesas,scif-r8a7795", "renesas,scif";
reg = <0 0xe6e68000 0 64>;
interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 206>;
- clock-names = "fck";
+ clocks = <&cpg CPG_MOD 206>,
+ <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+ <&scif_clk>;
+ clock-names = "fck", "int_clk", "scif_clk";
dmas = <&dmac1 0x53>, <&dmac1 0x52>;
dma-names = "tx", "rx";
power-domains = <&cpg>;
@@ -446,8 +468,10 @@
compatible = "renesas,scif-r8a7795", "renesas,scif";
reg = <0 0xe6e88000 0 64>;
interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 310>;
- clock-names = "fck";
+ clocks = <&cpg CPG_MOD 310>,
+ <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+ <&scif_clk>;
+ clock-names = "fck", "int_clk", "scif_clk";
dmas = <&dmac1 0x13>, <&dmac1 0x12>;
dma-names = "tx", "rx";
power-domains = <&cpg>;
@@ -458,8 +482,10 @@
compatible = "renesas,scif-r8a7795", "renesas,scif";
reg = <0 0xe6c50000 0 64>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 204>;
- clock-names = "fck";
+ clocks = <&cpg CPG_MOD 204>,
+ <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+ <&scif_clk>;
+ clock-names = "fck", "int_clk", "scif_clk";
dmas = <&dmac0 0x57>, <&dmac0 0x56>;
dma-names = "tx", "rx";
power-domains = <&cpg>;
@@ -470,8 +496,10 @@
compatible = "renesas,scif-r8a7795", "renesas,scif";
reg = <0 0xe6c40000 0 64>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 203>;
- clock-names = "fck";
+ clocks = <&cpg CPG_MOD 203>,
+ <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+ <&scif_clk>;
+ clock-names = "fck", "int_clk", "scif_clk";
dmas = <&dmac0 0x59>, <&dmac0 0x58>;
dma-names = "tx", "rx";
power-domains = <&cpg>;
@@ -482,8 +510,10 @@
compatible = "renesas,scif-r8a7795", "renesas,scif";
reg = <0 0xe6f30000 0 64>;
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 202>;
- clock-names = "fck";
+ clocks = <&cpg CPG_MOD 202>,
+ <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+ <&scif_clk>;
+ clock-names = "fck", "int_clk", "scif_clk";
dmas = <&dmac1 0x5b>, <&dmac1 0x5a>;
dma-names = "tx", "rx";
power-domains = <&cpg>;
--
1.9.1
next prev parent reply other threads:[~2015-11-19 18:39 UTC|newest]
Thread overview: 72+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-19 18:38 [PATCH 00/25] serial: sh-sci: Add external clock and BRG Support Geert Uytterhoeven
[not found] ` <1447958344-836-1-git-send-email-geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
2015-11-19 18:38 ` [PATCH 01/25] serial: sh-sci: Update DT binding documentation for external clock input Geert Uytterhoeven
[not found] ` <1447958344-836-2-git-send-email-geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
2015-11-19 20:19 ` Laurent Pinchart
2015-11-19 20:27 ` Laurent Pinchart
2015-11-19 20:39 ` Geert Uytterhoeven
[not found] ` <CAMuHMdUnT2zCnj9QBVgxJaHV2fk5iuc7cxq=fh+fVTv3toOVaQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-11-19 21:17 ` Laurent Pinchart
2015-11-20 8:00 ` Geert Uytterhoeven
2015-11-19 20:33 ` Geert Uytterhoeven
[not found] ` <CAMuHMdX4ToefbBLR6o2AMuzCMoKcYo9XRZOzHJzgtQn552vmNg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-12-21 14:20 ` Geert Uytterhoeven
2015-11-19 18:38 ` [PATCH 02/25] serial: sh-sci: Update DT binding documentation for BRG support Geert Uytterhoeven
2015-11-19 20:26 ` Laurent Pinchart
2015-11-19 20:44 ` Geert Uytterhoeven
[not found] ` <CAMuHMdWHbc1kK7MipyZ_M_C6gPyPqvC4H35eZLXQezjbQNK2Jw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-11-19 21:13 ` Laurent Pinchart
2015-11-20 7:58 ` Geert Uytterhoeven
2015-11-19 18:38 ` [PATCH 03/25] serial: sh-sci: Drop useless check for zero sampling_rate Geert Uytterhoeven
2015-11-19 18:38 ` [PATCH 04/25] serial: sh-sci: Grammar s/Get ... for/Get ... from/ Geert Uytterhoeven
2015-11-19 18:38 ` [PATCH 05/25] serial: sh-sci: Drop unused frame_len parameter for sci_baud_calc_hscif() Geert Uytterhoeven
2015-11-19 18:38 ` [PATCH 06/25] serial: sh-sci: Don't overwrite clock selection in serial_console_write() Geert Uytterhoeven
2015-11-19 18:38 ` [PATCH 07/25] serial: sh-sci: Convert from clk_get() to devm_clk_get() Geert Uytterhoeven
2015-11-19 20:38 ` Laurent Pinchart
2015-12-10 12:30 ` Geert Uytterhoeven
2015-12-13 19:39 ` Laurent Pinchart
2015-12-14 10:34 ` Geert Uytterhoeven
2015-12-14 15:47 ` Laurent Pinchart
2015-11-19 18:38 ` [PATCH 08/25] serial: sh-sci: Make unsigned values in sci_baud_calc_hscif() unsigned Geert Uytterhoeven
2015-11-19 20:36 ` Laurent Pinchart
2015-11-19 20:49 ` Geert Uytterhoeven
2015-11-19 18:38 ` [PATCH 09/25] serial: sh-sci: Avoid overflow in sci_baud_calc_hscif() Geert Uytterhoeven
2015-11-19 20:37 ` Laurent Pinchart
2015-11-19 20:50 ` Geert Uytterhoeven
2015-11-19 18:38 ` [PATCH 10/25] serial: sh-sci: Improve bit rate error calculation for HSCIF Geert Uytterhoeven
2015-11-19 18:38 ` [PATCH 11/25] serial: sh-sci: Avoid calculating the receive margin " Geert Uytterhoeven
2015-11-19 18:38 ` [PATCH 12/25] serial: sh-sci: Merge sci_scbrr_calc() and sci_baud_calc_hscif() Geert Uytterhoeven
2015-11-19 18:38 ` [PATCH 13/25] serial: sh-sci: Take into account sampling rate for max baud rate Geert Uytterhoeven
2015-11-19 18:38 ` [PATCH 14/25] serial: sh-sci: Add BRG register definitions Geert Uytterhoeven
2015-11-19 20:45 ` Laurent Pinchart
2015-11-19 18:38 ` [PATCH 15/25] serial: sh-sci: Replace struct sci_port_info by type/regtype encoding Geert Uytterhoeven
2015-11-19 18:38 ` [PATCH 16/25] serial: sh-sci: Correct SCIF type on RZ/A1H Geert Uytterhoeven
2015-11-19 18:38 ` [PATCH 17/25] serial: sh-sci: Correct SCIF type on R-Car for BRG Geert Uytterhoeven
2015-11-19 20:55 ` Laurent Pinchart
2015-11-20 7:46 ` Geert Uytterhoeven
2015-11-20 14:52 ` Laurent Pinchart
2015-11-20 15:30 ` Geert Uytterhoeven
2015-11-20 15:33 ` Laurent Pinchart
2015-12-10 9:21 ` Geert Uytterhoeven
2015-12-11 1:12 ` Simon Horman
2015-12-13 19:18 ` Laurent Pinchart
2015-11-19 18:38 ` [PATCH 18/25] serial: sh-sci: Prepare for multiple clocks and baud rate generators Geert Uytterhoeven
2015-11-19 21:04 ` Laurent Pinchart
2015-11-20 7:52 ` Geert Uytterhoeven
2015-11-20 14:47 ` Laurent Pinchart
2015-11-20 15:17 ` Geert Uytterhoeven
2015-11-20 15:31 ` Laurent Pinchart
2015-11-19 18:38 ` [PATCH 19/25] serial: sh-sci: Add support for optional external (H)SCK input Geert Uytterhoeven
2015-11-19 18:38 ` [PATCH 20/25] serial: sh-sci: Add support for optional BRG on (H)SCIF Geert Uytterhoeven
2015-11-19 18:39 ` [PATCH 21/25] ARM: shmobile: r8a7791 dtsi: Add BRG support for (H)SCIF Geert Uytterhoeven
2015-11-19 18:39 ` [PATCH 22/25] ARM: shmobile: koelsch dts: Enable SCIF_CLK frequency and pins Geert Uytterhoeven
2015-11-19 18:39 ` Geert Uytterhoeven [this message]
2015-11-19 21:07 ` [PATCH 23/25] arm64: renesas: r8a7795 dtsi: Add BRG support for (H)SCIF Laurent Pinchart
2015-11-20 8:17 ` Geert Uytterhoeven
2015-11-19 18:39 ` [PATCH 24/25] arm64: renesas: salvator-x dts: Enable SCIF_CLK frequency and pins Geert Uytterhoeven
2015-11-19 18:39 ` [PATCH 25/25] sh: sh7734: Correct SCIF type for BRG Geert Uytterhoeven
2015-11-19 21:08 ` [PATCH 00/25] serial: sh-sci: Add external clock and BRG Support Laurent Pinchart
2015-11-20 8:22 ` Geert Uytterhoeven
2015-11-20 8:58 ` Laurent Pinchart
2015-11-20 9:07 ` Geert Uytterhoeven
2015-11-20 14:50 ` Laurent Pinchart
2015-11-20 15:31 ` Geert Uytterhoeven
2015-11-20 9:09 ` Geert Uytterhoeven
2015-12-13 6:43 ` Greg Kroah-Hartman
2015-12-13 9:09 ` Geert Uytterhoeven
2015-11-24 2:43 ` Simon Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1447958344-836-24-git-send-email-geert+renesas@glider.be \
--to=geert+renesas@glider.be \
--cc=gregkh@linuxfoundation.org \
--cc=horms@verge.net.au \
--cc=laurent.pinchart+renesas@ideasonboard.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=linux-sh@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=ysato@users.sourceforge.jp \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).