From mboxrd@z Thu Jan 1 00:00:00 1970 From: Wolfram Sang Date: Tue, 08 Dec 2015 09:37:45 +0000 Subject: [PATCH v2 1/9] i2c: document generic DT bindings for timing parameters Message-Id: <1449567473-2084-2-git-send-email-wsa@the-dreams.de> List-Id: References: <1449567473-2084-1-git-send-email-wsa@the-dreams.de> In-Reply-To: <1449567473-2084-1-git-send-email-wsa@the-dreams.de> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-i2c@vger.kernel.org Cc: linux-sh@vger.kernel.org, Magnus Damm , Simon Horman , Laurent Pinchart , Geert Uytterhoeven , Wolfram Sang , Yoshihiro Shimoda , linux-rockchip@lists.infradead.org, Mika Westerberg , Andy Shevchenko , Jarkko Nikula , Rob Herring From: Wolfram Sang Also, sort the properties alphabetically and make indentation consistent. Wording largely taken from i2c-rk3x.txt, thanks guys! Only "i2c-scl-internal-delay-ns" is new, the rest is used by two drivers already and was documented in their driver binding documentation. Signed-off-by: Wolfram Sang Acked-by: Rob Herring --- Documentation/devicetree/bindings/i2c/i2c.txt | 31 ++++++++++++++++++++++----- 1 file changed, 26 insertions(+), 5 deletions(-) diff --git a/Documentation/devicetree/bindings/i2c/i2c.txt b/Documentation/devicetree/bindings/i2c/i2c.txt index 8a99150ac3a7fd..a00219f5ee0733 100644 --- a/Documentation/devicetree/bindings/i2c/i2c.txt +++ b/Documentation/devicetree/bindings/i2c/i2c.txt @@ -29,12 +29,33 @@ Optional properties These properties may not be supported by all drivers. However, if a driver wants to support one of the below features, it should adapt the bindings below. -- clock-frequency - frequency of bus clock in Hz. -- wakeup-source - device can be used as a wakeup source. +- clock-frequency + frequency of bus clock in Hz. -- interrupts - interrupts used by the device. -- interrupt-names - "irq" and "wakeup" names are recognized by I2C core, - other names are left to individual drivers. +- i2c-scl-falling-time-ns + Number of nanoseconds the SCL signal takes to fall; t(f) in the I2C + specification. + +- i2c-scl-internal-delay-ns + Number of nanoseconds the IP core additionally needs to setup SCL. + +- i2c-scl-rising-time-ns + Number of nanoseconds the SCL signal takes to rise; t(r) in the I2C + specification. + +- i2c-sda-falling-time-ns + Number of nanoseconds the SDA signal takes to fall; t(f) in the I2C + specification. + +- interrupts + interrupts used by the device. + +- interrupt-names + "irq" and "wakeup" names are recognized by I2C core, other names are + left to individual drivers. + +- wakeup-source + device can be used as a wakeup source. Binding may contain optional "interrupts" property, describing interrupts used by the device. I2C core will assign "irq" interrupt (or the very first -- 2.1.4