From: Paul Gortmaker <paul.gortmaker@windriver.com>
To: linux-kernel@vger.kernel.org
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>,
Simon Horman <horms@verge.net.au>,
Bjorn Helgaas <bhelgaas@google.com>,
linux-pci@vger.kernel.org, linux-sh@vger.kernel.org
Subject: [PATCH 07/10] drivers/pci: make host/pcie-rcar.c explicitly non-modular
Date: Sun, 13 Dec 2015 01:41:54 +0000 [thread overview]
Message-ID: <1449970917-12633-8-git-send-email-paul.gortmaker@windriver.com> (raw)
In-Reply-To: <1449970917-12633-1-git-send-email-paul.gortmaker@windriver.com>
The Kconfig currently controlling compilation of this code is:
drivers/pci/host/Kconfig:config PCI_RCAR_GEN2_PCIE
drivers/pci/host/Kconfig: bool "Renesas R-Car PCIe controller"
...meaning that it currently is not being built as a module by anyone.
Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.
Since module_platform_driver() uses the same init level priority as
builtin_platform_driver() the init ordering remains unchanged with
this commit.
We don't have to disallow a driver unbind, since that is already
done for us in this driver.
Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.
We also delete the MODULE_LICENSE tag etc. since all that information
was (or is now) contained at the top of the file in the comments.
Cc: Simon Horman <horms@verge.net.au>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-pci@vger.kernel.org
Cc: linux-sh@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
---
drivers/pci/host/pcie-rcar.c | 11 ++++-------
1 file changed, 4 insertions(+), 7 deletions(-)
diff --git a/drivers/pci/host/pcie-rcar.c b/drivers/pci/host/pcie-rcar.c
index f4fa6c537448..2c619277d265 100644
--- a/drivers/pci/host/pcie-rcar.c
+++ b/drivers/pci/host/pcie-rcar.c
@@ -7,6 +7,8 @@
* arch/sh/drivers/pci/ops-sh7786.c
* Copyright (C) 2009 - 2011 Paul Mundt
*
+ * Module Author: Phil Edworthy <phil.edworthy@renesas.com>
+ *
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
@@ -18,7 +20,7 @@
#include <linux/irq.h>
#include <linux/irqdomain.h>
#include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/init.h>
#include <linux/msi.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
@@ -921,7 +923,6 @@ static const struct of_device_id rcar_pcie_of_match[] = {
{ .compatible = "renesas,pcie-r8a7791", .data = rcar_pcie_hw_init },
{},
};
-MODULE_DEVICE_TABLE(of, rcar_pcie_of_match);
static int rcar_pcie_probe(struct platform_device *pdev)
{
@@ -1007,8 +1008,4 @@ static struct platform_driver rcar_pcie_driver = {
},
.probe = rcar_pcie_probe,
};
-module_platform_driver(rcar_pcie_driver);
-
-MODULE_AUTHOR("Phil Edworthy <phil.edworthy@renesas.com>");
-MODULE_DESCRIPTION("Renesas R-Car PCIe driver");
-MODULE_LICENSE("GPL v2");
+builtin_platform_driver(rcar_pcie_driver);
--
2.6.1
next prev parent reply other threads:[~2015-12-13 1:41 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-13 1:41 [PATCH 00/10] drivers/pci: avoid module_init in non-modular host/pci* Paul Gortmaker
2015-12-13 1:41 ` [PATCH 05/10] drivers/pci: make host/pci-rcar-gen2.c explicitly non-modular Paul Gortmaker
2015-12-13 10:59 ` Geert Uytterhoeven
2015-12-13 18:15 ` Paul Gortmaker
2015-12-13 20:37 ` Joe Perches
2015-12-14 5:19 ` Simon Horman
2015-12-13 1:41 ` Paul Gortmaker [this message]
2015-12-13 10:58 ` [PATCH 07/10] drivers/pci: make host/pcie-rcar.c " Geert Uytterhoeven
2015-12-13 18:20 ` Paul Gortmaker
2015-12-17 11:32 ` Phil Edworthy
2015-12-17 16:06 ` Paul Gortmaker
2015-12-14 5:19 ` Simon Horman
2015-12-14 8:19 ` [PATCH 00/10] drivers/pci: avoid module_init in non-modular host/pci* Geert Uytterhoeven
2015-12-14 8:24 ` Thierry Reding
2015-12-14 8:26 ` Michal Simek
2015-12-14 8:33 ` Ley Foon Tan
2015-12-14 9:19 ` Thierry Reding
2015-12-14 10:27 ` Arnd Bergmann
2015-12-15 15:16 ` Paul Gortmaker
2016-01-08 20:31 ` Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1449970917-12633-8-git-send-email-paul.gortmaker@windriver.com \
--to=paul.gortmaker@windriver.com \
--cc=bhelgaas@google.com \
--cc=horms@verge.net.au \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-sh@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).