From mboxrd@z Thu Jan 1 00:00:00 1970 From: Geert Uytterhoeven Date: Mon, 04 Jan 2016 13:45:19 +0000 Subject: [PATCH 2/5] serial: sh-sci: Preserve SCIFA/SCIFB bit rate config for serial console Message-Id: <1451915122-30219-3-git-send-email-geert+renesas@glider.be> List-Id: References: <1451915122-30219-1-git-send-email-geert+renesas@glider.be> In-Reply-To: <1451915122-30219-1-git-send-email-geert+renesas@glider.be> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: Greg Kroah-Hartman , Jiri Slaby Cc: Simon Horman , Magnus Damm , Yoshinori Sato , linux-serial@vger.kernel.org, linux-sh@vger.kernel.org, Geert Uytterhoeven SCIFA and SCIFB have additional bit rate config bits in the Serial Mode Register. Don't touch them when using the port as a serial console, as we rely on the boot loader to have configured the serial port config. Signed-off-by: Geert Uytterhoeven --- I'm not aware of any boot loader setting these bits, but better safe than sorry. --- drivers/tty/serial/sh-sci.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index a7c062192e2d3130..e8d6fa77e11208d4 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -2229,7 +2229,8 @@ done: } else { /* Don't touch the bit rate configuration */ scr_val = s->cfg->scscr & (SCSCR_CKE1 | SCSCR_CKE0); - smr_val |= serial_port_in(port, SCSMR) & SCSMR_CKS; + smr_val |= serial_port_in(port, SCSMR) & + (SCSMR_CKEDG | SCSMR_SRC_MASK | SCSMR_CKS); dev_dbg(port->dev, "SCR 0x%x SMR 0x%x\n", scr_val, smr_val); serial_port_out(port, SCSCR, scr_val); serial_port_out(port, SCSMR, smr_val); -- 1.9.1