From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: linux-sh@vger.kernel.org
Subject: Re: [PATCH v3 5/7] ARM: shmobile: sh73a0: add MSTP clock assignments to DT
Date: Wed, 05 Nov 2014 15:54:43 +0000 [thread overview]
Message-ID: <1467004.In07WrlpG8@avalon> (raw)
Hi Ulrich,
Thank you for the patch.
On Tuesday 28 October 2014 18:02:14 Ulrich Hecht wrote:
> Assigns clocks to cmt1, i2c*, mmcif, sdhi*, and scif*.
>
> Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> ---
> arch/arm/boot/dts/sh73a0.dtsi | 29 +++++++++++++++++++++++++++++
> 1 file changed, 29 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi
> index daa486c..de08c10 100644
> --- a/arch/arm/boot/dts/sh73a0.dtsi
> +++ b/arch/arm/boot/dts/sh73a0.dtsi
> @@ -56,6 +56,8 @@
>
> renesas,channels-mask = <0x3f>;
>
> + clocks = <&mstp3_clks SH73A0_CLK_CMT1>;
> + clock-names = "fck";
> status = "disabled";
> };
>
> @@ -145,6 +147,7 @@
> 0 168 IRQ_TYPE_LEVEL_HIGH
> 0 169 IRQ_TYPE_LEVEL_HIGH
> 0 170 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&mstp1_clks SH73A0_CLK_IIC0>;
> status = "disabled";
> };
>
> @@ -157,6 +160,7 @@
> 0 52 IRQ_TYPE_LEVEL_HIGH
> 0 53 IRQ_TYPE_LEVEL_HIGH
> 0 54 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&mstp3_clks SH73A0_CLK_IIC1>;
> status = "disabled";
> };
>
> @@ -169,6 +173,7 @@
> 0 172 IRQ_TYPE_LEVEL_HIGH
> 0 173 IRQ_TYPE_LEVEL_HIGH
> 0 174 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&mstp0_clks SH73A0_CLK_IIC2>;
> status = "disabled";
> };
>
> @@ -181,6 +186,7 @@
> 0 184 IRQ_TYPE_LEVEL_HIGH
> 0 185 IRQ_TYPE_LEVEL_HIGH
> 0 186 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&mstp4_clks SH73A0_CLK_IIC3>;
> status = "disabled";
> };
>
> @@ -193,6 +199,7 @@
> 0 188 IRQ_TYPE_LEVEL_HIGH
> 0 189 IRQ_TYPE_LEVEL_HIGH
> 0 190 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&mstp4_clks SH73A0_CLK_IIC4>;
> status = "disabled";
> };
>
> @@ -202,6 +209,7 @@
> interrupts = <0 140 IRQ_TYPE_LEVEL_HIGH
> 0 141 IRQ_TYPE_LEVEL_HIGH>;
> reg-io-width = <4>;
> + clocks = <&mstp3_clks SH73A0_CLK_MMCIF0>;
> status = "disabled";
> };
>
> @@ -212,6 +220,7 @@
> 0 84 IRQ_TYPE_LEVEL_HIGH
> 0 85 IRQ_TYPE_LEVEL_HIGH>;
> cap-sd-highspeed;
> + clocks = <&mstp3_clks SH73A0_CLK_SDHI0>;
> status = "disabled";
> };
>
> @@ -223,6 +232,7 @@
> 0 89 IRQ_TYPE_LEVEL_HIGH>;
> toshiba,mmc-wrprotect-disable;
> cap-sd-highspeed;
> + clocks = <&mstp3_clks SH73A0_CLK_SDHI1>;
> status = "disabled";
> };
>
> @@ -233,6 +243,7 @@
> 0 105 IRQ_TYPE_LEVEL_HIGH>;
> toshiba,mmc-wrprotect-disable;
> cap-sd-highspeed;
> + clocks = <&mstp3_clks SH73A0_CLK_SDHI2>;
> status = "disabled";
> };
>
> @@ -240,6 +251,8 @@
> compatible = "renesas,scifa-sh73a0", "renesas,scifa";
> reg = <0xe6c40000 0x100>;
> interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&mstp2_clks SH73A0_CLK_SCIFA0>;
> + clock-names = "sci_ick";
> status = "disabled";
> };
>
> @@ -247,6 +260,8 @@
> compatible = "renesas,scifa-sh73a0", "renesas,scifa";
> reg = <0xe6c50000 0x100>;
> interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&mstp2_clks SH73A0_CLK_SCIFA1>;
> + clock-names = "sci_ick";
> status = "disabled";
> };
>
> @@ -254,6 +269,8 @@
> compatible = "renesas,scifa-sh73a0", "renesas,scifa";
> reg = <0xe6c60000 0x100>;
> interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&mstp2_clks SH73A0_CLK_SCIFA2>;
> + clock-names = "sci_ick";
> status = "disabled";
> };
>
> @@ -261,6 +278,8 @@
> compatible = "renesas,scifa-sh73a0", "renesas,scifa";
> reg = <0xe6c70000 0x100>;
> interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&mstp2_clks SH73A0_CLK_SCIFA3>;
> + clock-names = "sci_ick";
> status = "disabled";
> };
>
> @@ -268,6 +287,8 @@
> compatible = "renesas,scifa-sh73a0", "renesas,scifa";
> reg = <0xe6c80000 0x100>;
> interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&mstp2_clks SH73A0_CLK_SCIFA4>;
> + clock-names = "sci_ick";
> status = "disabled";
> };
>
> @@ -275,6 +296,8 @@
> compatible = "renesas,scifa-sh73a0", "renesas,scifa";
> reg = <0xe6cb0000 0x100>;
> interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&mstp2_clks SH73A0_CLK_SCIFA5>;
> + clock-names = "sci_ick";
> status = "disabled";
> };
>
> @@ -282,6 +305,8 @@
> compatible = "renesas,scifa-sh73a0", "renesas,scifa";
> reg = <0xe6cc0000 0x100>;
> interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&mstp3_clks SH73A0_CLK_SCIFA6>;
> + clock-names = "sci_ick";
> status = "disabled";
> };
>
> @@ -289,6 +314,8 @@
> compatible = "renesas,scifa-sh73a0", "renesas,scifa";
> reg = <0xe6cd0000 0x100>;
> interrupts = <0 143 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&mstp2_clks SH73A0_CLK_SCIFA7>;
> + clock-names = "sci_ick";
> status = "disabled";
> };
>
> @@ -296,6 +323,8 @@
> compatible = "renesas,scifb-sh73a0", "renesas,scifb";
> reg = <0xe6c30000 0x100>;
> interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&mstp2_clks SH73A0_CLK_SCIFB>;
> + clock-names = "sci_ick";
> status = "disabled";
> };
--
Regards,
Laurent Pinchart
next reply other threads:[~2014-11-05 15:54 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-05 15:54 Laurent Pinchart [this message]
-- strict thread matches above, loose matches on Subject: below --
2014-10-28 17:02 [PATCH v3 5/7] ARM: shmobile: sh73a0: add MSTP clock assignments to DT Ulrich Hecht
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1467004.In07WrlpG8@avalon \
--to=laurent.pinchart@ideasonboard.com \
--cc=linux-sh@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox