linux-sh.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Yoshinori Sato <ysato@users.sourceforge.jp>
To: linux-sh@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Subject: [PATCH v5 10/22] sh: Add board specific initialize of of-generic
Date: Sun, 03 Jul 2016 16:46:30 +0000	[thread overview]
Message-ID: <1467564402-2649-11-git-send-email-ysato@users.sourceforge.jp> (raw)
In-Reply-To: <1467564402-2649-1-git-send-email-ysato@users.sourceforge.jp>

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
---
 arch/sh/boards/of-generic.c | 64 +++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 64 insertions(+)

diff --git a/arch/sh/boards/of-generic.c b/arch/sh/boards/of-generic.c
index 2d3cda3..4038682 100644
--- a/arch/sh/boards/of-generic.c
+++ b/arch/sh/boards/of-generic.c
@@ -16,9 +16,15 @@
 #include <linux/irqchip.h>
 #include <linux/clk-provider.h>
 #include <linux/memblock.h>
+#include <linux/sm501-regs.h>
 #include <asm/machvec.h>
 #include <asm/rtc.h>
 
+struct model_setup {
+	char *name;
+	void (*fn)(void);
+};
+
 #ifdef CONFIG_SMP
 
 static void dummy_smp_setup(void)
@@ -125,10 +131,61 @@ static void __init sh_of_time_init(void)
 	clocksource_probe();
 }
 
+#define PA_LED		0xb0000001	/* LED Control Register */
+#define PA_SHUTDOWN	0xb0000003	/* Shutdown Control Register */
+static void landisk_power_off(void)
+{
+	__raw_writeb(0x01, PA_SHUTDOWN);
+}
+
+static void __init landisk_setup(void)
+{
+	/* LED ON */
+	__raw_writeb(__raw_readb(PA_LED) | 0x03, PA_LED);
+	pm_power_off = landisk_power_off;
+}
+
+#define PA_POWOFF	0xa4000030	/* Board Power OFF control */
+#define PA_OUTPORT	0xa4000036	/* LED control */
+static void rts7751r2d_power_off(void)
+{
+	__raw_writew(0x0001, PA_POWOFF);
+}
+
+static void __init r2dplus_setup(void)
+{
+	void __iomem *sm501_reg;
+
+	__raw_writew(0x0000, PA_OUTPORT);
+	pm_power_off = rts7751r2d_power_off;
+
+	/* sm501 dram configuration:
+	 * ColSizeX = 11 - External Memory Column Size: 256 words.
+	 * APX = 1 - External Memory Active to Pre-Charge Delay: 7 clocks.
+	 * RstX = 1 - External Memory Reset: Normal.
+	 * Rfsh = 1 - Local Memory Refresh to Command Delay: 12 clocks.
+	 * BwC =  1 - Local Memory Block Write Cycle Time: 2 clocks.
+	 * BwP =  1 - Local Memory Block Write to Pre-Charge Delay: 1 clock.
+	 * AP = 1 - Internal Memory Active to Pre-Charge Delay: 7 clocks.
+	 * Rst = 1 - Internal Memory Reset: Normal.
+	 * RA = 1 - Internal Memory Remain in Active State: Do not remain.
+	 */
+
+	sm501_reg = (void __iomem *)0xb3e00000 + SM501_DRAM_CONTROL;
+	writel(readl(sm501_reg) | 0x00f107c0, sm501_reg);
+}
+
+static const struct model_setup model_setup_table[] __initconst = {
+	{ .name = "iodata,HDL-U", .fn = landisk_setup, },
+	{ .name = "renesas,RTS7751R2D+", .fn = r2dplus_setup, },
+	{},
+};
+
 static void __init sh_of_setup(char **cmdline_p)
 {
 	struct device_node *root;
 	struct device_node *cpu;
+	const struct model_setup *setup;
 	u32 freq;
 
 	board_time_init = sh_of_time_init;
@@ -145,6 +202,13 @@ static void __init sh_of_setup(char **cmdline_p)
 	cpu = of_find_node_by_name(NULL, "cpu");
 	if (!of_property_read_u32(cpu, "clock-frequency", &freq))
 		preset_lpj = freq / CONFIG_HZ / 2;
+
+	for (setup = model_setup_table; setup->name; setup++) {
+		if (strcmp(setup->name, sh_mv.mv_name) = 0) {
+			setup->fn();
+			break;
+		}
+	}
 }
 
 static int sh_of_irq_demux(int irq)
-- 
2.7.0


  parent reply	other threads:[~2016-07-03 16:46 UTC|newest]

Thread overview: 67+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-07-03 16:46 [PATCH v5 00/22] sh: LANDISK and R2Dplus convert to device tree Yoshinori Sato
2016-07-03 16:46 ` [PATCH v5 01/22] sh: Add sh-specific early_init_dt_reserve_memory_arch Yoshinori Sato
2016-07-04  2:03   ` Rich Felker
2016-07-06 13:53     ` Yoshinori Sato
2016-07-06 14:50       ` Rich Felker
2016-07-03 16:46 ` [PATCH v5 02/22] sh: More early unflatten device tree Yoshinori Sato
2016-07-03 16:46 ` [PATCH v5 03/22] sh: set preset_lpj Yoshinori Sato
2016-07-03 16:46 ` [PATCH v5 04/22] sh: Use P1SEGADDR Yoshinori Sato
2016-07-04  1:48   ` Rich Felker
2016-07-06 14:11     ` Yoshinori Sato
2016-07-06 14:53       ` Rich Felker
2016-07-03 16:46 ` [PATCH v5 05/22] sh: command line passing chosen/bootargs in devicetree Yoshinori Sato
2016-07-03 16:46 ` [PATCH v5 06/22] sh: FDT address save before bank change Yoshinori Sato
2016-07-03 16:46 ` [PATCH v5 07/22] sh: Passing FDT address on zImage Yoshinori Sato
2016-07-03 16:46 ` [PATCH v5 08/22] sh: Disable board specific code on device tree mode Yoshinori Sato
2016-07-03 16:46 ` [PATCH v5 09/22] sh: Use GENERIC_IOMAP " Yoshinori Sato
2016-07-03 16:46 ` Yoshinori Sato [this message]
2016-07-04  1:35   ` [PATCH v5 10/22] sh: Add board specific initialize of of-generic Rich Felker
2016-07-06 14:27     ` Yoshinori Sato
2016-07-03 16:46 ` [PATCH v5 11/22] sh: SH7750/51 CPG Driver Yoshinori Sato
     [not found] ` <1467564402-2649-1-git-send-email-ysato-Rn4VEauK+AKRv+LV9MX5uooqe+aC9MnS@public.gmane.org>
2016-07-03 16:46   ` [PATCH v6 12/22] sh: Add PCI host bridge driver for SH7751 Yoshinori Sato
2016-07-05 15:53     ` Rob Herring
2016-07-06 16:19       ` Yoshinori Sato
     [not found]     ` <1467564402-2649-13-git-send-email-ysato-Rn4VEauK+AKRv+LV9MX5uooqe+aC9MnS@public.gmane.org>
2016-07-22 22:59       ` Bjorn Helgaas
2016-07-03 16:46   ` [PATCH v5 13/22] sh: irqchip: SH7751 IRQCHIP Driver Yoshinori Sato
2016-07-03 16:46 ` [PATCH v5 14/22] sh: SH7751 core dtsi Yoshinori Sato
2016-07-03 16:46 ` [PATCH v5 15/22] sh: Move common PCI stuff to arch/sh/kernel Yoshinori Sato
2016-07-04  1:55   ` Rich Felker
2016-07-06 16:17     ` Yoshinori Sato
2016-07-03 16:46 ` [PATCH v5 16/22] pci: pci_config_window move to linux/pci.h Yoshinori Sato
2016-07-03 16:46 ` [PATCH v5 17/22] pci: PCI_HOST_GENERIC enable for SH Yoshinori Sato
2016-07-03 16:46 ` [PATCH v5 18/22] sh: Add separate DTB build rule Yoshinori Sato
2016-07-03 16:46 ` [PATCH v5 19/22] sh: IO-DATA HDL-U (a.k.a landisk) IRQCHIP driver Yoshinori Sato
2016-07-11 14:02   ` Rob Herring
2016-07-03 16:46 ` [PATCH v5 20/22] sh: IO-DATA HDL-U (a.k.a landisk) DeviceTree Yoshinori Sato
2016-07-03 19:00   ` Sergei Shtylyov
2016-07-06 16:18     ` Yoshinori Sato
2016-07-03 16:46 ` [PATCH v5 21/22] sh: Renesas RTS7751R2Dplus (a.k.a R2Dplus) IRQCHIP Driver Yoshinori Sato
2016-07-03 16:46 ` [PATCH v5 22/22] sh: Renesas RTS7751R2Dplus (a,k.a R2Dplus) DeviceTree Yoshinori Sato
2017-11-17 10:37 ` [PATCH v5 00/22] sh: LANDISK and R2Dplus convert to device tree John Paul Adrian Glaubitz
2017-11-17 17:39   ` [J-core] " Rob Landley
2017-11-17 17:49     ` John Paul Adrian Glaubitz
2017-11-17 19:17       ` Rich Felker
     [not found]         ` <7193aa1b-50e3-11d4-f93d-f567e2e06b8c@physik.fu-berlin.de>
2018-01-05 21:28           ` Rich Felker
2018-01-05 21:47             ` John Paul Adrian Glaubitz
2018-01-05 22:00               ` Rich Felker
2018-01-05 22:10                 ` John Paul Adrian Glaubitz
2018-05-03  1:37             ` Rich Felker
2018-05-03  2:33               ` Rich Felker
2018-05-03 10:07                 ` John Paul Adrian Glaubitz
2018-05-03 15:41                   ` Rich Felker
2018-05-07  1:40                   ` Yoshinori Sato
2018-05-07 11:00                     ` John Paul Adrian Glaubitz
2018-05-07 13:40                       ` Rob Landley
2018-05-07 13:50                         ` John Paul Adrian Glaubitz
2018-05-07 14:05                           ` Geert Uytterhoeven
2018-05-07 14:43                         ` Rich Felker
2018-05-07 15:13                           ` Rob Landley
2018-05-07 15:52                             ` Rich Felker
2018-05-07 14:45                       ` Rich Felker
2018-05-07 15:28                         ` Rob Landley
2018-05-07 15:55                           ` Rich Felker
2018-05-07 20:01                             ` Rob Landley
2018-05-08 12:05                       ` Yoshinori Sato
2018-05-15  1:41                     ` Rich Felker
2018-05-16  6:42                       ` Yoshinori Sato
2018-05-18  7:51                         ` John Paul Adrian Glaubitz

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1467564402-2649-11-git-send-email-ysato@users.sourceforge.jp \
    --to=ysato@users.sourceforge.jp \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sh@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).