From: Yoshinori Sato <ysato@users.sourceforge.jp>
To: devicetree@vger.kernel.org, linux-sh@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Subject: [PATCH v5 14/22] sh: SH7751 core dtsi
Date: Sun, 03 Jul 2016 16:46:34 +0000 [thread overview]
Message-ID: <1467564402-2649-15-git-send-email-ysato@users.sourceforge.jp> (raw)
In-Reply-To: <1467564402-2649-1-git-send-email-ysato@users.sourceforge.jp>
SH7751 core and internal peripheral define.
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
---
arch/sh/boot/dts/include/dt-bindings | 1 +
arch/sh/boot/dts/sh7751.dtsi | 83 ++++++++++++++++++++++
include/dt-bindings/clock/renesas-sh7750.h | 26 +++++++
include/dt-bindings/interrupt-controller/sh_intc.h | 2 +
4 files changed, 112 insertions(+)
create mode 120000 arch/sh/boot/dts/include/dt-bindings
create mode 100644 arch/sh/boot/dts/sh7751.dtsi
create mode 100644 include/dt-bindings/clock/renesas-sh7750.h
create mode 100644 include/dt-bindings/interrupt-controller/sh_intc.h
diff --git a/arch/sh/boot/dts/include/dt-bindings b/arch/sh/boot/dts/include/dt-bindings
new file mode 120000
index 0000000..08c00e4
--- /dev/null
+++ b/arch/sh/boot/dts/include/dt-bindings
@@ -0,0 +1 @@
+../../../../../include/dt-bindings
\ No newline at end of file
diff --git a/arch/sh/boot/dts/sh7751.dtsi b/arch/sh/boot/dts/sh7751.dtsi
new file mode 100644
index 0000000..713e72e
--- /dev/null
+++ b/arch/sh/boot/dts/sh7751.dtsi
@@ -0,0 +1,83 @@
+/*
+ * Device Tree Source for the SH7751
+ *
+ * Copyright (C) 2016 Yoshinori Sato
+ */
+
+#include <dt-bindings/interrupt-controller/sh_intc.h>
+#include <dt-bindings/clock/renesas-sh7750.h>
+
+/ {
+ oclk: oscillator {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
+ };
+ cpg: clock-controller@ffc00000 {
+ compatible = "renesas,sh7750-cpg";
+ clocks = <&oclk>;
+ #clock-cells = <1>;
+ renesas,mult = <12>;
+ reg = <0xffc00000 32>, <0xfe0a0000 16>;
+ };
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cpu@0 {
+ compatible = "renesas,sh4", "renesas,sh";
+ clock-frequency = <266666666>;
+ };
+ };
+ shintc: interrupt-controller@ffd00000 {
+ compatible = "renesas,sh7751-intc";
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ reg = <0xffd00000 14>, <0xfe080000 128>;
+
+ };
+ sci0: serial@ffe00000 {
+ compatible = "renesas,sci";
+ reg = <0xffe00000 0x20>;
+ interrupts = <evt2irq(0x4e0) 0>,
+ <evt2irq(0x500) 0>,
+ <evt2irq(0x540) 0>,
+ <evt2irq(0x520) 0>;
+ clocks = <&cpg SH7750_CLK_SCI>;
+ clock-names = "fck";
+ status = "disabled";
+ };
+ sci1: serial@ffe80000 {
+ compatible = "renesas,scif";
+ reg = <0xffe80000 0x100>;
+ interrupts = <evt2irq(0x700) 0>,
+ <evt2irq(0x720) 0>,
+ <evt2irq(0x760) 0>,
+ <evt2irq(0x740) 0>;
+ clocks = <&cpg SH7750_CLK_SCIF>;
+ clock-names = "fck";
+ status = "disabled";
+ };
+ tmu: timer@ffd80000 {
+ compatible = "renesas,tmu";
+ reg = <0xffd80000 12>;
+ interrupts = <evt2irq(0x400) 0>,
+ <evt2irq(0x420) 0>,
+ <evt2irq(0x440) 0>;
+ clocks = <&cpg SH7750_CLK_TMU0>;
+ clock-names = "fck";
+ renesas,channels-mask = <0x03>;
+ };
+ pci: pci-controller@fe200000 {
+ compatible = "renesas,sh7751-pci";
+ device_type = "pci";
+ bus-range = <0 0>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0x02000000 0x00000000 0xfd000000 0xfd000000 0x00000000 0x01000000>,
+ <0x01000000 0x00000000 0xfe240000 0x00000000 0x00000000 0x00040000>;
+ reg = <0xfe200000 0x0400>, <0xff800000 0x0030>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0x1800 0 7>;
+ status = "disabled";
+ };
+};
diff --git a/include/dt-bindings/clock/renesas-sh7750.h b/include/dt-bindings/clock/renesas-sh7750.h
new file mode 100644
index 0000000..546c0b1
--- /dev/null
+++ b/include/dt-bindings/clock/renesas-sh7750.h
@@ -0,0 +1,26 @@
+/*
+ * Copyright (C) 2016 Yoshinori Sato
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef __DT_BINDINGS_CLOCK_RENESAS_SH7750_H__
+#define __DT_BINDINGS_CLOCK_RENESAS_SH7750_H__
+
+#define SH7750_CLK_SCI 0
+#define SH7750_CLK_RTC 1
+#define SH7750_CLK_TMU0 2
+#define SH7750_CLK_TMU1 3
+#define SH7750_CLK_TMU2 4
+#define SH7750_CLK_SCIF 5
+#define SH7750_CLK_DMAC 6
+#define SH7750_CLK_UBC 7
+#define SH7750_CLK_SQ 8
+#define SH7750_CLK_INTC 9
+#define SH7750_CLK_TMU3 10
+#define SH7750_CLK_TMU4 11
+#define SH7750_CLK_PCIC 12
+
+#endif /* __DT_BINDINGS_CLOCK_RENESAS_CPG_MSSR_H__ */
diff --git a/include/dt-bindings/interrupt-controller/sh_intc.h b/include/dt-bindings/interrupt-controller/sh_intc.h
new file mode 100644
index 0000000..8c9dcdc
--- /dev/null
+++ b/include/dt-bindings/interrupt-controller/sh_intc.h
@@ -0,0 +1,2 @@
+#define evt2irq(evt) (((evt) >> 5) - 16)
+#define irq2evt(irq) (((irq) + 16) << 5)
--
2.7.0
next prev parent reply other threads:[~2016-07-03 16:46 UTC|newest]
Thread overview: 67+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-03 16:46 [PATCH v5 00/22] sh: LANDISK and R2Dplus convert to device tree Yoshinori Sato
2016-07-03 16:46 ` [PATCH v5 01/22] sh: Add sh-specific early_init_dt_reserve_memory_arch Yoshinori Sato
2016-07-04 2:03 ` Rich Felker
2016-07-06 13:53 ` Yoshinori Sato
2016-07-06 14:50 ` Rich Felker
2016-07-03 16:46 ` [PATCH v5 02/22] sh: More early unflatten device tree Yoshinori Sato
2016-07-03 16:46 ` [PATCH v5 03/22] sh: set preset_lpj Yoshinori Sato
2016-07-03 16:46 ` [PATCH v5 04/22] sh: Use P1SEGADDR Yoshinori Sato
2016-07-04 1:48 ` Rich Felker
2016-07-06 14:11 ` Yoshinori Sato
2016-07-06 14:53 ` Rich Felker
2016-07-03 16:46 ` [PATCH v5 05/22] sh: command line passing chosen/bootargs in devicetree Yoshinori Sato
2016-07-03 16:46 ` [PATCH v5 06/22] sh: FDT address save before bank change Yoshinori Sato
2016-07-03 16:46 ` [PATCH v5 07/22] sh: Passing FDT address on zImage Yoshinori Sato
2016-07-03 16:46 ` [PATCH v5 08/22] sh: Disable board specific code on device tree mode Yoshinori Sato
2016-07-03 16:46 ` [PATCH v5 09/22] sh: Use GENERIC_IOMAP " Yoshinori Sato
2016-07-03 16:46 ` [PATCH v5 10/22] sh: Add board specific initialize of of-generic Yoshinori Sato
2016-07-04 1:35 ` Rich Felker
2016-07-06 14:27 ` Yoshinori Sato
2016-07-03 16:46 ` [PATCH v5 11/22] sh: SH7750/51 CPG Driver Yoshinori Sato
[not found] ` <1467564402-2649-1-git-send-email-ysato-Rn4VEauK+AKRv+LV9MX5uooqe+aC9MnS@public.gmane.org>
2016-07-03 16:46 ` [PATCH v6 12/22] sh: Add PCI host bridge driver for SH7751 Yoshinori Sato
2016-07-05 15:53 ` Rob Herring
2016-07-06 16:19 ` Yoshinori Sato
[not found] ` <1467564402-2649-13-git-send-email-ysato-Rn4VEauK+AKRv+LV9MX5uooqe+aC9MnS@public.gmane.org>
2016-07-22 22:59 ` Bjorn Helgaas
2016-07-03 16:46 ` [PATCH v5 13/22] sh: irqchip: SH7751 IRQCHIP Driver Yoshinori Sato
2016-07-03 16:46 ` Yoshinori Sato [this message]
2016-07-03 16:46 ` [PATCH v5 15/22] sh: Move common PCI stuff to arch/sh/kernel Yoshinori Sato
2016-07-04 1:55 ` Rich Felker
2016-07-06 16:17 ` Yoshinori Sato
2016-07-03 16:46 ` [PATCH v5 16/22] pci: pci_config_window move to linux/pci.h Yoshinori Sato
2016-07-03 16:46 ` [PATCH v5 17/22] pci: PCI_HOST_GENERIC enable for SH Yoshinori Sato
2016-07-03 16:46 ` [PATCH v5 18/22] sh: Add separate DTB build rule Yoshinori Sato
2016-07-03 16:46 ` [PATCH v5 19/22] sh: IO-DATA HDL-U (a.k.a landisk) IRQCHIP driver Yoshinori Sato
2016-07-11 14:02 ` Rob Herring
2016-07-03 16:46 ` [PATCH v5 20/22] sh: IO-DATA HDL-U (a.k.a landisk) DeviceTree Yoshinori Sato
2016-07-03 19:00 ` Sergei Shtylyov
2016-07-06 16:18 ` Yoshinori Sato
2016-07-03 16:46 ` [PATCH v5 21/22] sh: Renesas RTS7751R2Dplus (a.k.a R2Dplus) IRQCHIP Driver Yoshinori Sato
2016-07-03 16:46 ` [PATCH v5 22/22] sh: Renesas RTS7751R2Dplus (a,k.a R2Dplus) DeviceTree Yoshinori Sato
2017-11-17 10:37 ` [PATCH v5 00/22] sh: LANDISK and R2Dplus convert to device tree John Paul Adrian Glaubitz
2017-11-17 17:39 ` [J-core] " Rob Landley
2017-11-17 17:49 ` John Paul Adrian Glaubitz
2017-11-17 19:17 ` Rich Felker
[not found] ` <7193aa1b-50e3-11d4-f93d-f567e2e06b8c@physik.fu-berlin.de>
2018-01-05 21:28 ` Rich Felker
2018-01-05 21:47 ` John Paul Adrian Glaubitz
2018-01-05 22:00 ` Rich Felker
2018-01-05 22:10 ` John Paul Adrian Glaubitz
2018-05-03 1:37 ` Rich Felker
2018-05-03 2:33 ` Rich Felker
2018-05-03 10:07 ` John Paul Adrian Glaubitz
2018-05-03 15:41 ` Rich Felker
2018-05-07 1:40 ` Yoshinori Sato
2018-05-07 11:00 ` John Paul Adrian Glaubitz
2018-05-07 13:40 ` Rob Landley
2018-05-07 13:50 ` John Paul Adrian Glaubitz
2018-05-07 14:05 ` Geert Uytterhoeven
2018-05-07 14:43 ` Rich Felker
2018-05-07 15:13 ` Rob Landley
2018-05-07 15:52 ` Rich Felker
2018-05-07 14:45 ` Rich Felker
2018-05-07 15:28 ` Rob Landley
2018-05-07 15:55 ` Rich Felker
2018-05-07 20:01 ` Rob Landley
2018-05-08 12:05 ` Yoshinori Sato
2018-05-15 1:41 ` Rich Felker
2018-05-16 6:42 ` Yoshinori Sato
2018-05-18 7:51 ` John Paul Adrian Glaubitz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1467564402-2649-15-git-send-email-ysato@users.sourceforge.jp \
--to=ysato@users.sourceforge.jp \
--cc=devicetree@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sh@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).