From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: linux-sh@vger.kernel.org
Subject: Re: [PATCH 2/2] arm: shmobile: lager: Add VIN1 SoC camera support
Date: Thu, 26 Dec 2013 14:21:51 +0000 [thread overview]
Message-ID: <1489712.o3NYJrXxTL@avalon> (raw)
In-Reply-To: <1387911334-27117-3-git-send-email-valentine.barshak@cogentembedded.com>
Hi Valentine,
Thank you for the patch.
Do you plan to implement DT support for the VIN driver in the near future ?
On Tuesday 24 December 2013 22:55:34 Valentine Barshak wrote:
> This adds VIN1 SoC camera along with ADV7180 subdevice support to Lager.
> VIN0 camera is not registered because it has ADV7612 I2C subdevice
> which is not supported yet.
>
> Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
> ---
> arch/arm/mach-shmobile/board-lager.c | 76 +++++++++++++++++++++++++++++++++
> 1 file changed, 76 insertions(+)
>
> diff --git a/arch/arm/mach-shmobile/board-lager.c
> b/arch/arm/mach-shmobile/board-lager.c index f20c10a..50173ec 100644
> --- a/arch/arm/mach-shmobile/board-lager.c
> +++ b/arch/arm/mach-shmobile/board-lager.c
> @@ -27,6 +27,7 @@
> #include <linux/mmc/host.h>
> #include <linux/mmc/sh_mmcif.h>
> #include <linux/pinctrl/machine.h>
> +#include <linux/platform_data/camera-rcar.h>
> #include <linux/platform_data/gpio-rcar.h>
> #include <linux/platform_data/rcar-du.h>
> #include <linux/platform_device.h>
> @@ -39,6 +40,7 @@
> #include <mach/common.h>
> #include <mach/irqs.h>
> #include <mach/r8a7790.h>
> +#include <media/soc_camera.h>
> #include <asm/mach-types.h>
> #include <asm/mach/arch.h>
> #include <linux/mtd/partitions.h>
> @@ -291,6 +293,62 @@ static const struct resource qspi_resources[]
> __initconst = { DEFINE_RES_IRQ(gic_spi(184)),
> };
>
> +/* VIN */
> +static const struct resource vin_resources[] __initconst = {
> + /* VIN0 */
> + DEFINE_RES_MEM(0xe6ef0000, 0x1000),
> + DEFINE_RES_IRQ(gic_spi(188)),
> + /* VIN1 */
> + DEFINE_RES_MEM(0xe6ef1000, 0x1000),
> + DEFINE_RES_IRQ(gic_spi(189)),
> +};
> +
> +void __init lager_add_vin_device(unsigned idx,
> + struct rcar_vin_platform_data *pdata)
You can make this function static.
> +{
> + struct platform_device_info vin_info = {
> + .parent = &platform_bus,
> + .name = "r8a7790-vin",
> + .id = idx,
> + .res = &vin_resources[idx * 2],
> + .num_res = 2,
> + .dma_mask = DMA_BIT_MASK(32),
> + .data = pdata,
> + .size_data = sizeof(*pdata),
> + };
> +
> + BUG_ON(idx > 1);
> +
> + platform_device_register_full(&vin_info);
> +}
> +
> +#define LAGER_CAMERA(idx, name, addr, pdata, flag) \
> +static struct i2c_board_info i2c_cam##idx##_device = { \
> + I2C_BOARD_INFO(name, addr), \
> +}; \
> + \
> +static struct rcar_vin_platform_data vin##idx##_pdata = { \
> + .flags = flag, \
> +}; \
> + \
> +static struct soc_camera_link cam##idx##_link = { \
> + .bus_id = idx, \
> + .board_info = &i2c_cam##idx##_device, \
> + .i2c_adapter_id = 2, \
> + .module_name = name, \
> + .priv = pdata, \
> +}
> +
> +/* Camera 0 is not currently supported due to adv7612 support missing */
> +LAGER_CAMERA(1, "adv7180", 0x20, NULL, RCAR_VIN_BT656);
> +
> +static void __init lager_add_camera1_device(void)
> +{
> + platform_device_register_data(&platform_bus, "soc-camera-pdrv", 1,
> + &cam1_link, sizeof(cam1_link));
> + lager_add_vin_device(1, &vin1_pdata);
> +}
> +
> static const struct pinctrl_map lager_pinctrl_map[] = {
> /* DU (CN10: ARGB0, CN13: LVDS) */
> PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7790", "pfc-r8a7790",
> @@ -319,6 +377,22 @@ static const struct pinctrl_map lager_pinctrl_map[] = {
> "eth_rmii", "eth"),
> PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-ether", "pfc-r8a7790",
> "intc_irq0", "intc"),
> + /* VIN0 */
> + PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-vin.0", "pfc-r8a7790",
> + "vin0_data24", "vin0"),
> + PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-vin.0", "pfc-r8a7790",
> + "vin0_sync", "vin0"),
> + PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-vin.0", "pfc-r8a7790",
> + "vin0_field", "vin0"),
> + PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-vin.0", "pfc-r8a7790",
> + "vin0_clkenb", "vin0"),
> + PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-vin.0", "pfc-r8a7790",
> + "vin0_clk", "vin0"),
> + /* VIN1 */
> + PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-vin.1", "pfc-r8a7790",
> + "vin1_data8", "vin1"),
> + PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-vin.1", "pfc-r8a7790",
> + "vin1_clk", "vin1"),
> };
>
> static void __init lager_add_standard_devices(void)
> @@ -368,6 +442,8 @@ static void __init lager_add_standard_devices(void)
> &vccq_sdhi0_info, sizeof(struct
gpio_regulator_config));
> platform_device_register_data(&platform_bus, "gpio-regulator",
> gpio_regulator_idx++, &vccq_sdhi2_info, sizeof(struct
> gpio_regulator_config)); +
> + lager_add_camera1_device();
> }
>
> /*
--
Regards,
Laurent Pinchart
next prev parent reply other threads:[~2013-12-26 14:21 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-24 18:55 [PATCH 2/2] arm: shmobile: lager: Add VIN1 SoC camera support Valentine Barshak
2013-12-26 14:21 ` Laurent Pinchart [this message]
2013-12-26 14:37 ` Valentine
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1489712.o3NYJrXxTL@avalon \
--to=laurent.pinchart@ideasonboard.com \
--cc=linux-sh@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).