* [PATCH v3 00/81] SH pin control and GPIO rework
@ 2012-12-15 22:50 Laurent Pinchart
2012-12-18 2:06 ` Simon Horman
` (2 more replies)
0 siblings, 3 replies; 4+ messages in thread
From: Laurent Pinchart @ 2012-12-15 22:50 UTC (permalink / raw)
To: linux-sh
Hi everybody,
Here's the third version of the SH pin control and GPIO rework patches. I've
removed OF support and related DT patches, as the patch set was growing too
big for my tastes. OF support will be submitted as a separate patch set on top
of this one.
I've (hopefully) fixed all issues pointed out by the comments I've received on
v2, except for comments to which I've replied that a fix will be part of a
later patch series.
This set starts with additional platform-specific fixes (patches 4 to 7), I
would appreciate if someone could review them carefully.
The patches are based on top of the latest mainline tree master branch. You
can get them from my git tree at
git://linuxtv.org/pinchartl/fbdev.git pinmux
The code has been compile-tested on all modified platforms except SH7264 and
SH7269, and runtime tested on SH7372 (Mackerel), SH73A0 (KZM-A9-GT) and
R8A7740 (Armadillo) so far. I will runtime test it on R8A7779 (Marzen).
The SH7264 and SH7269 platforms have no gpiolib support so the PFC code can't
be compiled for them. As the currently implemented arch-level pinmux support
also depends on generic GPIO, we're moving from a situation where the code
isn't used to a different situation where the code isn't used. I don't
consider that as a regression.
Sorry for the numerous checkpatch warnings, patches that move code around or
rename files don't modify the content to make review easier, and thus carry
warnings from the existing code.
I would like to push this set to v3.9 independently of the later rework and
OF-related sets. Linus and Simon, which tree would you like me to push this
through ?
Changes since v2:
- Update to latest mainline tree master branch
- Rename marks to match GPIO names
- Fix GPIOs data for sh7757, sh7786 and shx3 platforms
- Remove __devinit/__devexit
- Use devm_* managed memory allocation and mapping functions
- Use the sh_pfc_ prefix for structures and functions
- Update module authors
- Drop OF support and related DT patches
Changes since v1:
- Split SoC changes in one patch per SoC to make backporting easier
- Dropped SH7267 and SH7277 changes as support for those SoCs will be removed
from the kernel
- Removed the sh_pfc_register() function on ARM
- Added OF support for PFC instantiation and GPIO bindings
- Added PFC DT nodes for the Mackerel and KZM9G boards
- Added GPIO LEDs DT nodes for the KZM9G board
Laurent Pinchart (81):
sh: sh7264: Rename CRX0CRX1 mark to match GPIO names
sh: sh7269: Rename CRX0CRX1(CRX2) marks to match GPIO names
sh: sh7723: Rename GPIO_FN_SIUOSPD to GPIO_FN_SIUAOSPD
sh: sh7757: Fix GPIO_FN_ET0_MDIO and GPIO_FN_ET1_MDIO GPIO entries
sh: sh7786: Fix port E, G and J GPIOs
sh: sh7786: Fix last GPIO index
sh: shx3: Fix last GPIO index
sh-pfc: Remove all use of __devinit/__devexit
sh-pfc: Split platform data from the sh_pfc structure
sh-pfc: Move private definitions and declarations to private header
sh-pfc: Merge PFC core and pinctrl
sh-pfc: Merge PFC core and gpio
sh-pfc: Move platform device and driver to the core
sh-pfc: Use devm_kzalloc()
sh-pfc: Use devm_ioremap_nocache()
sh-pfc: Let the compiler decide whether to inline functions
sh-pfc: Remove check for impossible error condition
sh-pfc: Sort headers alphabetically
sh-pfc: Use sh_pfc_ namespace prefix through the whole driver
sh-pfc: Split platform device and platform driver registration
sh-pfc: Support passing resources through platform device
ARM: shmobile: Select PINCTRL
ARM: shmobile: r8a7740: Register PFC platform device
ARM: shmobile: r8a7779: Register PFC platform device
ARM: shmobile: sh7372: Register PFC platform device
ARM: shmobile: sh73a0: Register PFC platform device
ARM: shmobile: r8a7740: Add pin control resources
ARM: shmobile: sh7372: Add pin control resources
ARM: shmobile: sh73a0: Add pin control resources
sh: Add PFC platform device registration helper function
sh: sh7203: Register PFC platform device
sh: sh7264: Register PFC platform device
sh: sh7269: Register PFC platform device
sh: sh7720: Register PFC platform device
sh: sh7722: Register PFC platform device
sh: sh7723: Register PFC platform device
sh: sh7724: Register PFC platform device
sh: sh7734: Register PFC platform device
sh: sh7757: Register PFC platform device
sh: sh7785: Register PFC platform device
sh: sh7786: Register PFC platform device
sh: shx3: Register PFC platform device
sh-pfc: Remove platform device registration
sh-pfc: Remove unused resource and num_resources platform data fields
sh-pfc: Move driver from drivers/sh/ to drivers/pinctrl/
sh-pfc: Support pinmux info in driver data instead of platform data
sh-pfc: Add r8a7740 pinmux support
sh-pfc: Add r8a7779 pinmux support
sh-pfc: Add sh7372 pinmux support
sh-pfc: Add sh73a0 pinmux support
ARM: shmobile: r8a7740: Use driver-provided pinmux info
ARM: shmobile: r8a7779: Use driver-provided pinmux info
ARM: shmobile: sh7372: Use driver-provided pinmux info
ARM: shmobile: sh73a0: Use driver-provided pinmux info
sh-pfc: Add sh7203 pinmux support
sh-pfc: Add sh7264 pinmux support
sh-pfc: Add sh7269 pinmux support
sh-pfc: Add sh7720 pinmux support
sh-pfc: Add sh7722 pinmux support
sh-pfc: Add sh7723 pinmux support
sh-pfc: Add sh7724 pinmux support
sh-pfc: Add sh7734 pinmux support
sh-pfc: Add sh7757 pinmux support
sh-pfc: Add sh7785 pinmux support
sh-pfc: Add sh7786 pinmux support
sh-pfc: Add shx3 pinmux support
sh: sh7203: pinmux: Use driver-provided pinmux info
sh: sh7264: pinmux: Use driver-provided pinmux info
sh: sh7269: pinmux: Use driver-provided pinmux info
sh: sh7720: pinmux: Use driver-provided pinmux info
sh: sh7722: pinmux: Use driver-provided pinmux info
sh: sh7723: pinmux: Use driver-provided pinmux info
sh: sh7724: pinmux: Use driver-provided pinmux info
sh: sh7734: pinmux: Use driver-provided pinmux info
sh: sh7757: pinmux: Use driver-provided pinmux info
sh: sh7785: pinmux: Use driver-provided pinmux info
sh: sh7786: pinmux: Use driver-provided pinmux info
sh: shx3: pinmux: Use driver-provided pinmux info
sh: Remove unused sh_pfc_register_info() function
sh-pfc: Remove pinmux_info definition
sh-pfc: Move sh_pfc.h from include/linux/ to driver directory
arch/arm/Kconfig | 1 +
arch/arm/mach-shmobile/Makefile | 8 -
arch/arm/mach-shmobile/setup-r8a7740.c | 26 +
arch/arm/mach-shmobile/setup-r8a7779.c | 25 +
arch/arm/mach-shmobile/setup-sh7372.c | 26 +
arch/arm/mach-shmobile/setup-sh73a0.c | 25 +
arch/sh/Kconfig | 12 +
arch/sh/include/asm/gpio.h | 2 +-
arch/sh/include/cpu-common/cpu/pfc.h | 26 +
arch/sh/include/cpu-sh4/cpu/sh7723.h | 2 +-
arch/sh/include/cpu-sh4/cpu/sh7786.h | 8 +-
arch/sh/kernel/cpu/Makefile | 2 +-
arch/sh/kernel/cpu/pfc.c | 33 +
arch/sh/kernel/cpu/sh2a/pinmux-sh7203.c | 1582 +-----------
arch/sh/kernel/cpu/sh2a/pinmux-sh7264.c | 2121 +---------------
arch/sh/kernel/cpu/sh2a/pinmux-sh7269.c | 2823 +-------------------
arch/sh/kernel/cpu/sh3/pinmux-sh7720.c | 1226 +---------
arch/sh/kernel/cpu/sh4a/pinmux-sh7722.c | 1778 +------------
arch/sh/kernel/cpu/sh4a/pinmux-sh7723.c | 1893 +-------------
arch/sh/kernel/cpu/sh4a/pinmux-sh7724.c | 2210 +---------------
arch/sh/kernel/cpu/sh4a/pinmux-sh7734.c | 2470 +-----------------
arch/sh/kernel/cpu/sh4a/pinmux-sh7757.c | 2267 +----------------
arch/sh/kernel/cpu/sh4a/pinmux-sh7785.c | 1294 +---------
arch/sh/kernel/cpu/sh4a/pinmux-sh7786.c | 822 +------
arch/sh/kernel/cpu/sh4a/pinmux-shx3.c | 573 +----
drivers/pinctrl/Kconfig | 2 +-
drivers/pinctrl/Makefile | 2 +
drivers/pinctrl/sh-pfc/Kconfig | 116 +
drivers/pinctrl/sh-pfc/Makefile | 21 +
drivers/{sh/pfc => pinctrl/sh-pfc}/core.c | 355 ++-
drivers/pinctrl/sh-pfc/core.h | 72 +
drivers/{sh/pfc => pinctrl/sh-pfc}/gpio.c | 114 +-
.../pinctrl/sh-pfc}/pfc-r8a7740.c | 11 +-
.../pinctrl/sh-pfc}/pfc-r8a7779.c | 29 +-
drivers/pinctrl/sh-pfc/pfc-sh7203.c | 1592 +++++++++++
drivers/pinctrl/sh-pfc/pfc-sh7264.c | 2131 +++++++++++++++
drivers/pinctrl/sh-pfc/pfc-sh7269.c | 2834 ++++++++++++++++++++
.../pinctrl/sh-pfc}/pfc-sh7372.c | 11 +-
.../pinctrl/sh-pfc}/pfc-sh73a0.c | 11 +-
drivers/pinctrl/sh-pfc/pfc-sh7720.c | 1236 +++++++++
drivers/pinctrl/sh-pfc/pfc-sh7722.c | 1779 ++++++++++++
drivers/pinctrl/sh-pfc/pfc-sh7723.c | 1903 +++++++++++++
drivers/pinctrl/sh-pfc/pfc-sh7724.c | 2225 +++++++++++++++
drivers/pinctrl/sh-pfc/pfc-sh7734.c | 2475 +++++++++++++++++
drivers/pinctrl/sh-pfc/pfc-sh7757.c | 2282 ++++++++++++++++
drivers/pinctrl/sh-pfc/pfc-sh7785.c | 1304 +++++++++
drivers/pinctrl/sh-pfc/pfc-sh7786.c | 837 ++++++
drivers/pinctrl/sh-pfc/pfc-shx3.c | 582 ++++
drivers/{sh/pfc => pinctrl/sh-pfc}/pinctrl.c | 170 +-
{include/linux => drivers/pinctrl/sh-pfc}/sh_pfc.h | 43 +-
drivers/sh/Kconfig | 1 -
drivers/sh/Makefile | 1 -
drivers/sh/pfc/Kconfig | 26 -
drivers/sh/pfc/Makefile | 3 -
54 files changed, 21899 insertions(+), 21524 deletions(-)
create mode 100644 arch/sh/include/cpu-common/cpu/pfc.h
create mode 100644 arch/sh/kernel/cpu/pfc.c
create mode 100644 drivers/pinctrl/sh-pfc/Kconfig
create mode 100644 drivers/pinctrl/sh-pfc/Makefile
rename drivers/{sh/pfc => pinctrl/sh-pfc}/core.c (50%)
create mode 100644 drivers/pinctrl/sh-pfc/core.h
rename drivers/{sh/pfc => pinctrl/sh-pfc}/gpio.c (57%)
rename {arch/arm/mach-shmobile => drivers/pinctrl/sh-pfc}/pfc-r8a7740.c (99%)
rename {arch/arm/mach-shmobile => drivers/pinctrl/sh-pfc}/pfc-r8a7779.c (99%)
create mode 100644 drivers/pinctrl/sh-pfc/pfc-sh7203.c
create mode 100644 drivers/pinctrl/sh-pfc/pfc-sh7264.c
create mode 100644 drivers/pinctrl/sh-pfc/pfc-sh7269.c
rename {arch/arm/mach-shmobile => drivers/pinctrl/sh-pfc}/pfc-sh7372.c (99%)
rename {arch/arm/mach-shmobile => drivers/pinctrl/sh-pfc}/pfc-sh73a0.c (99%)
create mode 100644 drivers/pinctrl/sh-pfc/pfc-sh7720.c
create mode 100644 drivers/pinctrl/sh-pfc/pfc-sh7722.c
create mode 100644 drivers/pinctrl/sh-pfc/pfc-sh7723.c
create mode 100644 drivers/pinctrl/sh-pfc/pfc-sh7724.c
create mode 100644 drivers/pinctrl/sh-pfc/pfc-sh7734.c
create mode 100644 drivers/pinctrl/sh-pfc/pfc-sh7757.c
create mode 100644 drivers/pinctrl/sh-pfc/pfc-sh7785.c
create mode 100644 drivers/pinctrl/sh-pfc/pfc-sh7786.c
create mode 100644 drivers/pinctrl/sh-pfc/pfc-shx3.c
rename drivers/{sh/pfc => pinctrl/sh-pfc}/pinctrl.c (73%)
rename {include/linux => drivers/pinctrl/sh-pfc}/sh_pfc.h (83%)
delete mode 100644 drivers/sh/pfc/Kconfig
delete mode 100644 drivers/sh/pfc/Makefile
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [PATCH v3 00/81] SH pin control and GPIO rework
2012-12-15 22:50 [PATCH v3 00/81] SH pin control and GPIO rework Laurent Pinchart
@ 2012-12-18 2:06 ` Simon Horman
2012-12-19 15:31 ` Linus Walleij
2012-12-19 21:24 ` Laurent Pinchart
2 siblings, 0 replies; 4+ messages in thread
From: Simon Horman @ 2012-12-18 2:06 UTC (permalink / raw)
To: linux-sh
On Sat, Dec 15, 2012 at 11:50:34PM +0100, Laurent Pinchart wrote:
> Hi everybody,
>
> Here's the third version of the SH pin control and GPIO rework patches. I've
> removed OF support and related DT patches, as the patch set was growing too
> big for my tastes. OF support will be submitted as a separate patch set on top
> of this one.
>
> I've (hopefully) fixed all issues pointed out by the comments I've received on
> v2, except for comments to which I've replied that a fix will be part of a
> later patch series.
>
> This set starts with additional platform-specific fixes (patches 4 to 7), I
> would appreciate if someone could review them carefully.
>
> The patches are based on top of the latest mainline tree master branch. You
> can get them from my git tree at
>
> git://linuxtv.org/pinchartl/fbdev.git pinmux
>
> The code has been compile-tested on all modified platforms except SH7264 and
> SH7269, and runtime tested on SH7372 (Mackerel), SH73A0 (KZM-A9-GT) and
> R8A7740 (Armadillo) so far. I will runtime test it on R8A7779 (Marzen).
>
> The SH7264 and SH7269 platforms have no gpiolib support so the PFC code can't
> be compiled for them. As the currently implemented arch-level pinmux support
> also depends on generic GPIO, we're moving from a situation where the code
> isn't used to a different situation where the code isn't used. I don't
> consider that as a regression.
>
> Sorry for the numerous checkpatch warnings, patches that move code around or
> rename files don't modify the content to make review easier, and thus carry
> warnings from the existing code.
>
> I would like to push this set to v3.9 independently of the later rework and
> OF-related sets. Linus and Simon, which tree would you like me to push this
> through ?
Either way is fine for me. But regardless Paul should probably Ack the
arch/sh/ portions.
>
> Changes since v2:
>
> - Update to latest mainline tree master branch
> - Rename marks to match GPIO names
> - Fix GPIOs data for sh7757, sh7786 and shx3 platforms
> - Remove __devinit/__devexit
> - Use devm_* managed memory allocation and mapping functions
> - Use the sh_pfc_ prefix for structures and functions
> - Update module authors
> - Drop OF support and related DT patches
>
> Changes since v1:
>
> - Split SoC changes in one patch per SoC to make backporting easier
> - Dropped SH7267 and SH7277 changes as support for those SoCs will be removed
> from the kernel
> - Removed the sh_pfc_register() function on ARM
> - Added OF support for PFC instantiation and GPIO bindings
> - Added PFC DT nodes for the Mackerel and KZM9G boards
> - Added GPIO LEDs DT nodes for the KZM9G board
>
> Laurent Pinchart (81):
> sh: sh7264: Rename CRX0CRX1 mark to match GPIO names
> sh: sh7269: Rename CRX0CRX1(CRX2) marks to match GPIO names
> sh: sh7723: Rename GPIO_FN_SIUOSPD to GPIO_FN_SIUAOSPD
> sh: sh7757: Fix GPIO_FN_ET0_MDIO and GPIO_FN_ET1_MDIO GPIO entries
> sh: sh7786: Fix port E, G and J GPIOs
> sh: sh7786: Fix last GPIO index
> sh: shx3: Fix last GPIO index
> sh-pfc: Remove all use of __devinit/__devexit
> sh-pfc: Split platform data from the sh_pfc structure
> sh-pfc: Move private definitions and declarations to private header
> sh-pfc: Merge PFC core and pinctrl
> sh-pfc: Merge PFC core and gpio
> sh-pfc: Move platform device and driver to the core
> sh-pfc: Use devm_kzalloc()
> sh-pfc: Use devm_ioremap_nocache()
> sh-pfc: Let the compiler decide whether to inline functions
> sh-pfc: Remove check for impossible error condition
> sh-pfc: Sort headers alphabetically
> sh-pfc: Use sh_pfc_ namespace prefix through the whole driver
> sh-pfc: Split platform device and platform driver registration
> sh-pfc: Support passing resources through platform device
> ARM: shmobile: Select PINCTRL
> ARM: shmobile: r8a7740: Register PFC platform device
> ARM: shmobile: r8a7779: Register PFC platform device
> ARM: shmobile: sh7372: Register PFC platform device
> ARM: shmobile: sh73a0: Register PFC platform device
> ARM: shmobile: r8a7740: Add pin control resources
> ARM: shmobile: sh7372: Add pin control resources
> ARM: shmobile: sh73a0: Add pin control resources
> sh: Add PFC platform device registration helper function
> sh: sh7203: Register PFC platform device
> sh: sh7264: Register PFC platform device
> sh: sh7269: Register PFC platform device
> sh: sh7720: Register PFC platform device
> sh: sh7722: Register PFC platform device
> sh: sh7723: Register PFC platform device
> sh: sh7724: Register PFC platform device
> sh: sh7734: Register PFC platform device
> sh: sh7757: Register PFC platform device
> sh: sh7785: Register PFC platform device
> sh: sh7786: Register PFC platform device
> sh: shx3: Register PFC platform device
> sh-pfc: Remove platform device registration
> sh-pfc: Remove unused resource and num_resources platform data fields
> sh-pfc: Move driver from drivers/sh/ to drivers/pinctrl/
> sh-pfc: Support pinmux info in driver data instead of platform data
> sh-pfc: Add r8a7740 pinmux support
> sh-pfc: Add r8a7779 pinmux support
> sh-pfc: Add sh7372 pinmux support
> sh-pfc: Add sh73a0 pinmux support
> ARM: shmobile: r8a7740: Use driver-provided pinmux info
> ARM: shmobile: r8a7779: Use driver-provided pinmux info
> ARM: shmobile: sh7372: Use driver-provided pinmux info
> ARM: shmobile: sh73a0: Use driver-provided pinmux info
> sh-pfc: Add sh7203 pinmux support
> sh-pfc: Add sh7264 pinmux support
> sh-pfc: Add sh7269 pinmux support
> sh-pfc: Add sh7720 pinmux support
> sh-pfc: Add sh7722 pinmux support
> sh-pfc: Add sh7723 pinmux support
> sh-pfc: Add sh7724 pinmux support
> sh-pfc: Add sh7734 pinmux support
> sh-pfc: Add sh7757 pinmux support
> sh-pfc: Add sh7785 pinmux support
> sh-pfc: Add sh7786 pinmux support
> sh-pfc: Add shx3 pinmux support
> sh: sh7203: pinmux: Use driver-provided pinmux info
> sh: sh7264: pinmux: Use driver-provided pinmux info
> sh: sh7269: pinmux: Use driver-provided pinmux info
> sh: sh7720: pinmux: Use driver-provided pinmux info
> sh: sh7722: pinmux: Use driver-provided pinmux info
> sh: sh7723: pinmux: Use driver-provided pinmux info
> sh: sh7724: pinmux: Use driver-provided pinmux info
> sh: sh7734: pinmux: Use driver-provided pinmux info
> sh: sh7757: pinmux: Use driver-provided pinmux info
> sh: sh7785: pinmux: Use driver-provided pinmux info
> sh: sh7786: pinmux: Use driver-provided pinmux info
> sh: shx3: pinmux: Use driver-provided pinmux info
> sh: Remove unused sh_pfc_register_info() function
> sh-pfc: Remove pinmux_info definition
> sh-pfc: Move sh_pfc.h from include/linux/ to driver directory
>
> arch/arm/Kconfig | 1 +
> arch/arm/mach-shmobile/Makefile | 8 -
> arch/arm/mach-shmobile/setup-r8a7740.c | 26 +
> arch/arm/mach-shmobile/setup-r8a7779.c | 25 +
> arch/arm/mach-shmobile/setup-sh7372.c | 26 +
> arch/arm/mach-shmobile/setup-sh73a0.c | 25 +
> arch/sh/Kconfig | 12 +
> arch/sh/include/asm/gpio.h | 2 +-
> arch/sh/include/cpu-common/cpu/pfc.h | 26 +
> arch/sh/include/cpu-sh4/cpu/sh7723.h | 2 +-
> arch/sh/include/cpu-sh4/cpu/sh7786.h | 8 +-
> arch/sh/kernel/cpu/Makefile | 2 +-
> arch/sh/kernel/cpu/pfc.c | 33 +
> arch/sh/kernel/cpu/sh2a/pinmux-sh7203.c | 1582 +-----------
> arch/sh/kernel/cpu/sh2a/pinmux-sh7264.c | 2121 +---------------
> arch/sh/kernel/cpu/sh2a/pinmux-sh7269.c | 2823 +-------------------
> arch/sh/kernel/cpu/sh3/pinmux-sh7720.c | 1226 +---------
> arch/sh/kernel/cpu/sh4a/pinmux-sh7722.c | 1778 +------------
> arch/sh/kernel/cpu/sh4a/pinmux-sh7723.c | 1893 +-------------
> arch/sh/kernel/cpu/sh4a/pinmux-sh7724.c | 2210 +---------------
> arch/sh/kernel/cpu/sh4a/pinmux-sh7734.c | 2470 +-----------------
> arch/sh/kernel/cpu/sh4a/pinmux-sh7757.c | 2267 +----------------
> arch/sh/kernel/cpu/sh4a/pinmux-sh7785.c | 1294 +---------
> arch/sh/kernel/cpu/sh4a/pinmux-sh7786.c | 822 +------
> arch/sh/kernel/cpu/sh4a/pinmux-shx3.c | 573 +----
> drivers/pinctrl/Kconfig | 2 +-
> drivers/pinctrl/Makefile | 2 +
> drivers/pinctrl/sh-pfc/Kconfig | 116 +
> drivers/pinctrl/sh-pfc/Makefile | 21 +
> drivers/{sh/pfc => pinctrl/sh-pfc}/core.c | 355 ++-
> drivers/pinctrl/sh-pfc/core.h | 72 +
> drivers/{sh/pfc => pinctrl/sh-pfc}/gpio.c | 114 +-
> .../pinctrl/sh-pfc}/pfc-r8a7740.c | 11 +-
> .../pinctrl/sh-pfc}/pfc-r8a7779.c | 29 +-
> drivers/pinctrl/sh-pfc/pfc-sh7203.c | 1592 +++++++++++
> drivers/pinctrl/sh-pfc/pfc-sh7264.c | 2131 +++++++++++++++
> drivers/pinctrl/sh-pfc/pfc-sh7269.c | 2834 ++++++++++++++++++++
> .../pinctrl/sh-pfc}/pfc-sh7372.c | 11 +-
> .../pinctrl/sh-pfc}/pfc-sh73a0.c | 11 +-
> drivers/pinctrl/sh-pfc/pfc-sh7720.c | 1236 +++++++++
> drivers/pinctrl/sh-pfc/pfc-sh7722.c | 1779 ++++++++++++
> drivers/pinctrl/sh-pfc/pfc-sh7723.c | 1903 +++++++++++++
> drivers/pinctrl/sh-pfc/pfc-sh7724.c | 2225 +++++++++++++++
> drivers/pinctrl/sh-pfc/pfc-sh7734.c | 2475 +++++++++++++++++
> drivers/pinctrl/sh-pfc/pfc-sh7757.c | 2282 ++++++++++++++++
> drivers/pinctrl/sh-pfc/pfc-sh7785.c | 1304 +++++++++
> drivers/pinctrl/sh-pfc/pfc-sh7786.c | 837 ++++++
> drivers/pinctrl/sh-pfc/pfc-shx3.c | 582 ++++
> drivers/{sh/pfc => pinctrl/sh-pfc}/pinctrl.c | 170 +-
> {include/linux => drivers/pinctrl/sh-pfc}/sh_pfc.h | 43 +-
> drivers/sh/Kconfig | 1 -
> drivers/sh/Makefile | 1 -
> drivers/sh/pfc/Kconfig | 26 -
> drivers/sh/pfc/Makefile | 3 -
> 54 files changed, 21899 insertions(+), 21524 deletions(-)
> create mode 100644 arch/sh/include/cpu-common/cpu/pfc.h
> create mode 100644 arch/sh/kernel/cpu/pfc.c
> create mode 100644 drivers/pinctrl/sh-pfc/Kconfig
> create mode 100644 drivers/pinctrl/sh-pfc/Makefile
> rename drivers/{sh/pfc => pinctrl/sh-pfc}/core.c (50%)
> create mode 100644 drivers/pinctrl/sh-pfc/core.h
> rename drivers/{sh/pfc => pinctrl/sh-pfc}/gpio.c (57%)
> rename {arch/arm/mach-shmobile => drivers/pinctrl/sh-pfc}/pfc-r8a7740.c (99%)
> rename {arch/arm/mach-shmobile => drivers/pinctrl/sh-pfc}/pfc-r8a7779.c (99%)
> create mode 100644 drivers/pinctrl/sh-pfc/pfc-sh7203.c
> create mode 100644 drivers/pinctrl/sh-pfc/pfc-sh7264.c
> create mode 100644 drivers/pinctrl/sh-pfc/pfc-sh7269.c
> rename {arch/arm/mach-shmobile => drivers/pinctrl/sh-pfc}/pfc-sh7372.c (99%)
> rename {arch/arm/mach-shmobile => drivers/pinctrl/sh-pfc}/pfc-sh73a0.c (99%)
> create mode 100644 drivers/pinctrl/sh-pfc/pfc-sh7720.c
> create mode 100644 drivers/pinctrl/sh-pfc/pfc-sh7722.c
> create mode 100644 drivers/pinctrl/sh-pfc/pfc-sh7723.c
> create mode 100644 drivers/pinctrl/sh-pfc/pfc-sh7724.c
> create mode 100644 drivers/pinctrl/sh-pfc/pfc-sh7734.c
> create mode 100644 drivers/pinctrl/sh-pfc/pfc-sh7757.c
> create mode 100644 drivers/pinctrl/sh-pfc/pfc-sh7785.c
> create mode 100644 drivers/pinctrl/sh-pfc/pfc-sh7786.c
> create mode 100644 drivers/pinctrl/sh-pfc/pfc-shx3.c
> rename drivers/{sh/pfc => pinctrl/sh-pfc}/pinctrl.c (73%)
> rename {include/linux => drivers/pinctrl/sh-pfc}/sh_pfc.h (83%)
> delete mode 100644 drivers/sh/pfc/Kconfig
> delete mode 100644 drivers/sh/pfc/Makefile
>
> --
> Regards,
>
> Laurent Pinchart
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [PATCH v3 00/81] SH pin control and GPIO rework
2012-12-15 22:50 [PATCH v3 00/81] SH pin control and GPIO rework Laurent Pinchart
2012-12-18 2:06 ` Simon Horman
@ 2012-12-19 15:31 ` Linus Walleij
2012-12-19 21:24 ` Laurent Pinchart
2 siblings, 0 replies; 4+ messages in thread
From: Linus Walleij @ 2012-12-19 15:31 UTC (permalink / raw)
To: linux-sh
On Sat, Dec 15, 2012 at 11:50 PM, Laurent Pinchart
<laurent.pinchart+renesas@ideasonboard.com> wrote:
> I would like to push this set to v3.9 independently of the later rework and
> OF-related sets. Linus and Simon, which tree would you like me to push this
> through ?
The pinctrl or sh tree obviously :-)
Basically if you believe there will be colissions with other stuff in
the sh tree
it should go in through that tree. Obviously there is little risk of collissions
in the pinctrl tree as this is a new driver.
You can add my Acked-by: to the entire patch set, since the result at
the end is super-nice.
I think there were review comments of mine that were not fixed yet,
but I trust you to go through that and fix it up as time goes by.
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH v3 00/81] SH pin control and GPIO rework
2012-12-15 22:50 [PATCH v3 00/81] SH pin control and GPIO rework Laurent Pinchart
2012-12-18 2:06 ` Simon Horman
2012-12-19 15:31 ` Linus Walleij
@ 2012-12-19 21:24 ` Laurent Pinchart
2 siblings, 0 replies; 4+ messages in thread
From: Laurent Pinchart @ 2012-12-19 21:24 UTC (permalink / raw)
To: linux-sh
Hi Linus,
On Wednesday 19 December 2012 16:31:00 Linus Walleij wrote:
> On Sat, Dec 15, 2012 at 11:50 PM, Laurent Pinchart wrote:
> > I would like to push this set to v3.9 independently of the later rework
> > and OF-related sets. Linus and Simon, which tree would you like me to push
> > this through ?
>
> The pinctrl or sh tree obviously :-)
>
> Basically if you believe there will be colissions with other stuff in
> the sh tree it should go in through that tree. Obviously there is little
> risk of collissions in the pinctrl tree as this is a new driver.
I believe the risk of collisions in the SH and ARM trees are higher than in
the pinctrl tree, so it would probably better to push the patches through
Simon.
> You can add my Acked-by: to the entire patch set, since the result at
> the end is super-nice.
Thank you.
I'll push a public branch on top of v3.8-rc1 when it will be released, and
will send a pull request a couple of weeks later.
> I think there were review comments of mine that were not fixed yet,
> but I trust you to go through that and fix it up as time goes by.
They will be addressed by new patch series. This one is already pretty big, I
didn't want to delay it anymore.
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2012-12-19 21:24 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-12-15 22:50 [PATCH v3 00/81] SH pin control and GPIO rework Laurent Pinchart
2012-12-18 2:06 ` Simon Horman
2012-12-19 15:31 ` Linus Walleij
2012-12-19 21:24 ` Laurent Pinchart
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).