From mboxrd@z Thu Jan 1 00:00:00 1970 From: Laurent Pinchart Date: Wed, 30 Apr 2014 16:21:47 +0000 Subject: Re: [RFC/PATCH 5/6] ARM: shmobile: lager: Enable SCIF0 and SCIF1 serial ports in DT Message-Id: <1622833.NlOeSW67vC@avalon> List-Id: References: <1398817906-6023-6-git-send-email-laurent.pinchart+renesas@ideasonboard.com> In-Reply-To: <1398817906-6023-6-git-send-email-laurent.pinchart+renesas@ideasonboard.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-sh@vger.kernel.org Hi Simon, On Wednesday 30 April 2014 10:29:23 Simon Horman wrote: > On Wed, Apr 30, 2014 at 03:02:20AM +0200, Laurent Pinchart wrote: > > On Wednesday 30 April 2014 09:59:56 Simon Horman wrote: > > > On Wed, Apr 30, 2014 at 02:31:45AM +0200, Laurent Pinchart wrote: > > > > SCIF0 and SCIF1 are used as debug serial ports. Enable them and > > > > configure pinmuxing appropriately. We can now remove the clkdev > > > > registration hack for SCIF devices from the Lager reference board > > > > file. > > > > > > > > As a side effect of switching to DT-based serial port instantiation, > > > > ttySC6 and ttySC7 get renamed to ttySC0 and ttySC1. As the device tree > > > > source if now shared between lager and lager-reference, we need to > > > > update the serial ports in C code as well. > > > > > > I believe the second paragraph is no longer correct. > > > > Oops, you're right. If no other problem is found with the series, could > > you please just drop that paragraph ? > > Yes. But could you look at my other comment below? Oops, I've missed that. > I'm unsure why the clock workaround is no longer needed. > > > > > Signed-off-by: Laurent Pinchart > > > > > > > > --- > > > > > > > > arch/arm/boot/dts/r8a7790-lager.dts | 21 ++++++++++++++++- > > > > arch/arm/mach-shmobile/board-lager-reference.c | 10 ---------- > > > > arch/arm/mach-shmobile/setup-r8a7790.c | 10 +++++----- > > > > 3 files changed, 25 insertions(+), 16 deletions(-) [snip] > > > > diff --git a/arch/arm/mach-shmobile/board-lager-reference.c > > > > b/arch/arm/mach-shmobile/board-lager-reference.c index > > > > 1eb48cf..013c42b > > > > 100644 > > > > --- a/arch/arm/mach-shmobile/board-lager-reference.c > > > > +++ b/arch/arm/mach-shmobile/board-lager-reference.c > > > > @@ -91,16 +91,6 @@ static void __init lager_add_du_device(void) > > > > */ > > > > static const struct clk_name clk_names[] __initconst = { > > > > { "cmt0", NULL, "sh_cmt.0" }, > > > > - { "scifa0", NULL, "sh-sci.0" }, > > > > - { "scifa1", NULL, "sh-sci.1" }, > > > > - { "scifb0", NULL, "sh-sci.2" }, > > > > - { "scifb1", NULL, "sh-sci.3" }, > > > > - { "scifb2", NULL, "sh-sci.4" }, > > > > - { "scifa2", NULL, "sh-sci.5" }, > > > > - { "scif0", NULL, "sh-sci.6" }, > > > > - { "scif1", NULL, "sh-sci.7" }, > > > > - { "hscif0", NULL, "sh-sci.8" }, > > > > - { "hscif1", NULL, "sh-sci.9" }, > > > > { "du0", "du.0", "rcar-du-r8a7790" }, > > > > { "du1", "du.1", "rcar-du-r8a7790" }, > > > > { "du2", "du.2", "rcar-du-r8a7790" }, > > > > > > Is this correct. Magnus seemed to think otherwise for a slightly > > > different change I proposed for Marzen. The clk_names array workaround is only needed to expose DT-defined clocks to non-DT devices. Now that the SCIF devices are instantiated from DT, we don't need SCIF entries in the array anymore. The clk_enables array workaround is needed for drivers that don't enable the device clock(s) manually and instead rely on runtime PM to do so. As the sh- sci driver enables the clock manually there's no need to add SCIF entries to the clk_enables array. -- Regards, Laurent Pinchart