From mboxrd@z Thu Jan  1 00:00:00 1970
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Date: Wed, 19 Sep 2012 18:27:55 +0000
Subject: Re: [PATCH v2 4/6] pwm_backlight: Add deferred probe support
Message-Id: <1697155.mRXUHrIIe9@avalon>
List-Id: <linux-sh.vger.kernel.org>
References: <1343140823-13754-5-git-send-email-laurent.pinchart@ideasonboard.com>
In-Reply-To: <1343140823-13754-5-git-send-email-laurent.pinchart@ideasonboard.com>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: linux-sh@vger.kernel.org

Hi Simon,

On Saturday 25 August 2012 15:57:12 Simon Horman wrote:
> On Tue, Jul 24, 2012 at 04:40:21PM +0200, Laurent Pinchart wrote:
> > If the PWM instance is not available yet at probe time, request a
> > deferred probe.
> > 
> > A better way to fix might be to create a PWM subsystem (possibly
> > integrated into the GPIO subsystem) to support generic PWM objects, and
> > make sure the subsystem gets initialized first.
> 
> Hi Richard,
> 
> I am wondering if you have had a chance to review this change.
> I believe that it is a pre-requisite for work that Laurent has
> done to enable the backlight on the Armadillo 800 EVA board.

The PWM core now returns -EPROBE_DEFER if pwm_get() or pwm_request() can't 
find the requested device, so this patch isn't needed anymore.

> If the change is ok I am happy to take it through
> my shmobile tree if that makes life easier for you.
> 
> Below is an updated version of the patch which applies on top of 3.6-rc3.
> 
> From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> 
> pwm_backlight: Add deferred probe support
> 
> If the PWM instance is not available yet at probe time, request a
> deferred probe.
> 
> A better way to fix might be to create a PWM subsystem (possibly
> integrated into the GPIO subsystem) to support generic PWM objects, and
> make sure the subsystem gets initialized first.
> 
> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Signed-off-by: Simon Horman <horms@verge.net.au>
> 
> diff --git a/drivers/video/backlight/pwm_bl.c
> b/drivers/video/backlight/pwm_bl.c index 995f016..cc71f87 100644
> --- a/drivers/video/backlight/pwm_bl.c
> +++ b/drivers/video/backlight/pwm_bl.c
> @@ -221,6 +221,8 @@ static int pwm_backlight_probe(struct platform_device
> *pdev) if (IS_ERR(pb->pwm)) {
>  			dev_err(&pdev->dev, "unable to request legacy PWM\n");
>  			ret = PTR_ERR(pb->pwm);
> +			if (ret = -ENODEV)
> +				ret = -EPROBE_DEFER;
>  			goto err_alloc;
>  		}
>  	}
-- 
Regards,

Laurent Pinchart