From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: linux-sh@vger.kernel.org
Subject: Re: [PATCH v2 4/7] ARM: shmobile: r8a7791: Add PCIEC clock device tree node
Date: Thu, 12 Jun 2014 15:34:03 +0000 [thread overview]
Message-ID: <18955770.HtJEDO8MTC@avalon> (raw)
In-Reply-To: <1401716531-29794-5-git-send-email-geert+renesas@glider.be>
Hi Phil,
Thank you for the patch.
On Wednesday 11 June 2014 12:05:50 Phil Edworthy wrote:
> This patch adds the device tree clock node for the PCIe Controller
>
> Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> ---
> v2:
> - Changed PCIe controller names,etc from pcie to pciec
> - Corrected MTSP bit ordering
>
> arch/arm/boot/dts/r8a7791.dtsi | 7 ++++---
> include/dt-bindings/clock/r8a7791-clock.h | 1 +
> 2 files changed, 5 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
> index b639006..1e644eb 100644
> --- a/arch/arm/boot/dts/r8a7791.dtsi
> +++ b/arch/arm/boot/dts/r8a7791.dtsi
> @@ -772,15 +772,16 @@
> compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-
clocks";
> reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>;
> clocks = <&cp_clk>, <&sd2_clk>, <&sd1_clk>, <&cpg_clocks
> R8A7791_CLK_SD0>, - <&mmc0_clk>, <&hp_clk>, <&hp_clk>,
<&mp_clk>,
> <&rclk_clk>;
> + <&mmc0_clk>, <&hp_clk>, <&mp_clk>, <&hp_clk>, <&mp_clk>,
<&rclk_clk>;
> #clock-cells = <1>;
> renesas,clock-indices = <
> R8A7791_CLK_TPU0 R8A7791_CLK_SDHI2 R8A7791_CLK_SDHI1
R8A7791_CLK_SDHI0
> - R8A7791_CLK_MMCIF0 R8A7791_CLK_IIC0 R8A7791_CLK_IIC1
R8A7791_CLK_SSUSB
> R8A7791_CLK_CMT1 + R8A7791_CLK_MMCIF0 R8A7791_CLK_IIC0
R8A7791_CLK_PCIEC
> R8A7791_CLK_IIC1 + R8A7791_CLK_SSUSB R8A7791_CLK_CMT1
>
> >;
>
> clock-output-names > "tpu0", "sdhi2", "sdhi1", "sdhi0",
> - "mmcif0", "i2c7", "i2c8", "ssusb", "cmt1";
> + "mmcif0", "i2c7", "pciec", "i2c8", "ssusb", "cmt1";
> };
> mstp5_clks: mstp5_clks@e6150144 {
> compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-
clocks";
> diff --git a/include/dt-bindings/clock/r8a7791-clock.h
> b/include/dt-bindings/clock/r8a7791-clock.h index b050d18..1101e64 100644
> --- a/include/dt-bindings/clock/r8a7791-clock.h
> +++ b/include/dt-bindings/clock/r8a7791-clock.h
> @@ -53,6 +53,7 @@
> #define R8A7791_CLK_SDHI0 14
> #define R8A7791_CLK_MMCIF0 15
> #define R8A7791_CLK_IIC0 18
> +#define R8A7791_CLK_PCIEC 19
> #define R8A7791_CLK_IIC1 23
> #define R8A7791_CLK_SSUSB 28
> #define R8A7791_CLK_CMT1 29
--
Regards,
Laurent Pinchart
next prev parent reply other threads:[~2014-06-12 15:34 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-02 13:42 [PATCH v2 0/7] ARM: shmobile: koelsch reference: Enable DMA for QSPI Geert Uytterhoeven
2014-06-02 13:42 ` [PATCH v2 1/7] DMA: shdma: Add r8a7791 support Geert Uytterhoeven
2014-06-04 11:29 ` Laurent Pinchart
2014-06-04 11:39 ` Geert Uytterhoeven
2014-06-02 13:42 ` [PATCH v2 2/7] DMA: shdma: Spelling s/controll/control/ Geert Uytterhoeven
2014-06-02 13:50 ` Ben Dooks
2014-06-04 11:25 ` Laurent Pinchart
2014-06-02 13:42 ` [PATCH v2 3/7] ARM: shmobile: r8a7791 dtsi: add SYS-DMAC clocks Geert Uytterhoeven
2014-06-04 11:24 ` Laurent Pinchart
2014-06-04 23:29 ` Simon Horman
2014-06-02 13:42 ` [PATCH v2 4/7] ARM: shmobile: r8a7791: Add SYS-DMAC channel definitions for bindings Geert Uytterhoeven
2014-06-02 13:52 ` Ben Dooks
2014-06-03 7:53 ` Geert Uytterhoeven
2014-06-04 11:30 ` Laurent Pinchart
2014-06-04 11:45 ` Ben Dooks
2014-06-04 11:53 ` Laurent Pinchart
2014-06-11 11:05 ` [PATCH v2 4/7] ARM: shmobile: r8a7791: Add PCIEC clock device tree node Phil Edworthy
2014-06-12 15:34 ` Laurent Pinchart [this message]
2014-06-02 13:42 ` [PATCH v2 5/7] ARM: shmobile: r8a7791 dtsi: Add SYS-DMAC0 and SYS-DMAC1 nodes Geert Uytterhoeven
2014-06-04 12:25 ` Laurent Pinchart
2014-06-05 0:17 ` Kuninori Morimoto
2014-06-05 12:37 ` Laurent Pinchart
2014-06-06 11:22 ` Ben Dooks
2014-06-02 13:42 ` [PATCH v2 6/7] ARM: shmobile: koelsch dts: Enable sysdma0 and sysdma1 Geert Uytterhoeven
2014-06-02 13:42 ` [PATCH v2 7/7] ARM: shmobile: r8a7791 dtsi: Enable DMA for QSPI Geert Uytterhoeven
2014-06-02 13:53 ` Ben Dooks
2014-06-02 13:58 ` [PATCH v2 0/7] ARM: shmobile: koelsch reference: " Ben Dooks
2014-06-03 4:36 ` Khiem Nguyen
2014-06-03 7:05 ` Geert Uytterhoeven
2014-06-03 23:29 ` Simon Horman
2014-06-04 0:18 ` Khiem Nguyen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=18955770.HtJEDO8MTC@avalon \
--to=laurent.pinchart@ideasonboard.com \
--cc=linux-sh@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).