From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH V3 06/12] ARM: shmobile: r7s72100: add scif nodes to dtsi
Date: Fri, 07 Mar 2014 16:13:34 +0000 [thread overview]
Message-ID: <1930280.sZNcfhZEL8@avalon> (raw)
In-Reply-To: <1394208048-32495-7-git-send-email-wsa@the-dreams.de>
Hi Wolfram,
Thank you for the patch.
On Friday 07 March 2014 17:00:42 Wolfram Sang wrote:
> From: Wolfram Sang <wsa@sang-engineering.com>
>
> Signed-off-by: Wolfram Sang <wsa@sang-engineering.com>
> ---
> arch/arm/boot/dts/r7s72100.dtsi | 104 +++++++++++++++++++++++++++++++++++++
> 1 file changed, 104 insertions(+)
>
> diff --git a/arch/arm/boot/dts/r7s72100.dtsi
> b/arch/arm/boot/dts/r7s72100.dtsi index 6af5c28c670e..d49afe30c1d7 100644
> --- a/arch/arm/boot/dts/r7s72100.dtsi
> +++ b/arch/arm/boot/dts/r7s72100.dtsi
> @@ -23,6 +23,14 @@
> i2c1 = &i2c1;
> i2c2 = &i2c2;
> i2c3 = &i2c3;
> + serial0 = &scif0;
> + serial1 = &scif1;
> + serial2 = &scif2;
> + serial3 = &scif3;
> + serial4 = &scif4;
> + serial5 = &scif5;
> + serial6 = &scif6;
> + serial7 = &scif7;
As port usages is board specific, shouldn't this be moved to the board .dts
file, with only serial0 = &scif2 ?
> spi0 = &spi0;
> spi1 = &spi1;
> spi2 = &spi2;
> @@ -200,6 +208,102 @@
> status = "disabled";
> };
>
> + scif0: serial@e8007000 {
> + compatible = "renesas,scif-r7s72100", "renesas,scif";
> + reg = <0xe8007000 64>;
> + interrupts = <0 190 IRQ_TYPE_LEVEL_HIGH>,
> + <0 191 IRQ_TYPE_LEVEL_HIGH>,
> + <0 192 IRQ_TYPE_LEVEL_HIGH>,
> + <0 189 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&mstp4_clks R7S72100_CLK_SCIF0>;
> + clock-names = "sci_ick";
> + status = "disabled";
> + };
> +
> + scif1: serial@e8007800 {
> + compatible = "renesas,scif-r7s72100", "renesas,scif";
> + reg = <0xe8007800 64>;
> + interrupts = <0 194 IRQ_TYPE_LEVEL_HIGH>,
> + <0 195 IRQ_TYPE_LEVEL_HIGH>,
> + <0 196 IRQ_TYPE_LEVEL_HIGH>,
> + <0 193 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&mstp4_clks R7S72100_CLK_SCIF1>;
> + clock-names = "sci_ick";
> + status = "disabled";
> + };
> +
> + scif2: serial@e8008000 {
> + compatible = "renesas,scif-r7s72100", "renesas,scif";
> + reg = <0xe8008000 64>;
> + interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>,
> + <0 199 IRQ_TYPE_LEVEL_HIGH>,
> + <0 200 IRQ_TYPE_LEVEL_HIGH>,
> + <0 197 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&mstp4_clks R7S72100_CLK_SCIF2>;
> + clock-names = "sci_ick";
> + status = "disabled";
> + };
> +
> + scif3: serial@e8008800 {
> + compatible = "renesas,scif-r7s72100", "renesas,scif";
> + reg = <0xe8008800 64>;
> + interrupts = <0 202 IRQ_TYPE_LEVEL_HIGH>,
> + <0 203 IRQ_TYPE_LEVEL_HIGH>,
> + <0 204 IRQ_TYPE_LEVEL_HIGH>,
> + <0 201 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&mstp4_clks R7S72100_CLK_SCIF3>;
> + clock-names = "sci_ick";
> + status = "disabled";
> + };
> +
> + scif4: serial@e8009000 {
> + compatible = "renesas,scif-r7s72100", "renesas,scif";
> + reg = <0xe8009000 64>;
> + interrupts = <0 206 IRQ_TYPE_LEVEL_HIGH>,
> + <0 207 IRQ_TYPE_LEVEL_HIGH>,
> + <0 208 IRQ_TYPE_LEVEL_HIGH>,
> + <0 205 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&mstp4_clks R7S72100_CLK_SCIF4>;
> + clock-names = "sci_ick";
> + status = "disabled";
> + };
> +
> + scif5: serial@e8009800 {
> + compatible = "renesas,scif-r7s72100", "renesas,scif";
> + reg = <0xe8009800 64>;
> + interrupts = <0 210 IRQ_TYPE_LEVEL_HIGH>,
> + <0 211 IRQ_TYPE_LEVEL_HIGH>,
> + <0 212 IRQ_TYPE_LEVEL_HIGH>,
> + <0 209 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&mstp4_clks R7S72100_CLK_SCIF5>;
> + clock-names = "sci_ick";
> + status = "disabled";
> + };
> +
> + scif6: serial@e800a000 {
> + compatible = "renesas,scif-r7s72100", "renesas,scif";
> + reg = <0xe800a000 64>;
> + interrupts = <0 214 IRQ_TYPE_LEVEL_HIGH>,
> + <0 215 IRQ_TYPE_LEVEL_HIGH>,
> + <0 216 IRQ_TYPE_LEVEL_HIGH>,
> + <0 213 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&mstp4_clks R7S72100_CLK_SCIF6>;
> + clock-names = "sci_ick";
> + status = "disabled";
> + };
> +
> + scif7: serial@e800a800 {
> + compatible = "renesas,scif-r7s72100", "renesas,scif";
> + reg = <0xe800a800 64>;
> + interrupts = <0 218 IRQ_TYPE_LEVEL_HIGH>,
> + <0 219 IRQ_TYPE_LEVEL_HIGH>,
> + <0 220 IRQ_TYPE_LEVEL_HIGH>,
> + <0 217 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&mstp4_clks R7S72100_CLK_SCIF7>;
> + clock-names = "sci_ick";
> + status = "disabled";
> + };
> +
> spi0: spi@e800c800 {
> compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
> reg = <0xe800c800 0x24>;
--
Regards,
Laurent Pinchart
next prev parent reply other threads:[~2014-03-07 16:13 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-07 16:00 [PATCH V3 00/12] CCF support for Renesas r7s72100 Wolfram Sang
2014-03-07 16:00 ` [PATCH V3 01/12] clk: shmobile: add CPG driver for rz-platforms Wolfram Sang
2014-03-21 1:26 ` Mike Turquette
2014-03-07 16:00 ` [PATCH V3 02/12] ARM: shmobile: r7s72100: document MSTP clock support Wolfram Sang
2014-03-07 16:00 ` [PATCH V3 03/12] ARM: shmobile: r7s72100: add essential clock nodes to dtsi Wolfram Sang
2014-03-07 16:22 ` Ben Dooks
2014-03-07 16:33 ` Wolfram Sang
2014-03-07 16:00 ` [PATCH V3 04/12] ARM: shmobile: r7s72100: genmai: populate nodes for external clocks Wolfram Sang
2014-03-07 16:00 ` [PATCH V3 05/12] ARM: shmobile: r7s72100: use workaround for non DT-clocks Wolfram Sang
2014-03-07 16:00 ` [PATCH V3 06/12] ARM: shmobile: r7s72100: add scif nodes to dtsi Wolfram Sang
2014-03-07 16:13 ` Laurent Pinchart [this message]
2014-03-07 16:25 ` Wolfram Sang
2014-03-07 16:37 ` Laurent Pinchart
2014-03-07 16:44 ` Wolfram Sang
2014-03-07 16:48 ` Laurent Pinchart
2014-03-07 16:48 ` Wolfram Sang
2014-03-07 16:00 ` [PATCH V3 07/12] ARM: shmobile: r7s72100: genmai: activate scif2 for console output Wolfram Sang
2014-03-07 16:00 ` [PATCH V3 08/12] ARM: shmobile: r7s72100: genmai: platform scif devices only for legacy support Wolfram Sang
2014-03-07 16:00 ` [PATCH V3 09/12] ARM: shmobile: r7s72100: add i2c clocks to dtsi Wolfram Sang
2014-03-07 16:00 ` [PATCH V3 10/12] ARM: shmobile: r7s72100: remove I2C DT clocks from legacy clock support Wolfram Sang
2014-03-07 16:00 ` [PATCH V3 11/12] ARM: shmobile: r7s72100: add spi clocks to dtsi Wolfram Sang
2014-03-07 16:00 ` [PATCH V3 12/12] ARM: shmobile: r7s72100: remove SPI DT clocks from legacy clock support Wolfram Sang
2014-03-07 16:14 ` [PATCH V3 00/12] CCF support for Renesas r7s72100 Laurent Pinchart
2014-03-07 16:29 ` Wolfram Sang
2014-03-07 16:36 ` Laurent Pinchart
2014-03-07 16:47 ` Wolfram Sang
2014-03-07 16:59 ` Laurent Pinchart
2014-03-10 7:27 ` Wolfram Sang
2014-03-10 11:59 ` Laurent Pinchart
2014-03-27 6:46 ` Wolfram Sang
2014-03-27 10:56 ` Laurent Pinchart
2014-03-27 11:36 ` Wolfram Sang
2014-03-27 12:50 ` Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1930280.sZNcfhZEL8@avalon \
--to=laurent.pinchart@ideasonboard.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).