From: Magnus Damm <magnus.damm@gmail.com>
To: linux-sh@vger.kernel.org
Subject: [PATCH] sh: trapped io support for highlander V2
Date: Thu, 07 Feb 2008 11:23:53 +0000 [thread overview]
Message-ID: <20080207112353.9748.54200.sendpatchset@clockwork.opensource.se> (raw)
In-Reply-To: <20080206152342.27118.35156.sendpatchset@clockwork.opensource.se>
This patch converts the highlander CF device from good old machvec readb/writeb
to the new shiny trapped io.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
---
arch/sh/Kconfig | 1
arch/sh/boards/renesas/r7780rp/setup.c | 47 ++++++++++----------------------
include/asm-sh/r7780rp.h | 3 --
3 files changed, 17 insertions(+), 34 deletions(-)
--- 0007/arch/sh/Kconfig
+++ work/arch/sh/Kconfig 2008-02-07 19:18:21.000000000 +0900
@@ -472,6 +472,7 @@ config SH_HIGHLANDER
bool "Highlander"
depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
select SYS_SUPPORTS_PCI
+ select IO_TRAPPED
config SH_MIGOR
bool "Migo-R"
--- 0001/arch/sh/boards/renesas/r7780rp/setup.c
+++ work/arch/sh/boards/renesas/r7780rp/setup.c 2008-02-07 19:20:09.000000000 +0900
@@ -23,6 +23,7 @@
#include <asm/clock.h>
#include <asm/heartbeat.h>
#include <asm/io.h>
+#include <asm/io_trapped.h>
static struct resource r8a66597_usb_host_resources[] = {
[0] = {
@@ -181,13 +182,27 @@ static struct platform_device *r7780rp_d
&m66592_usb_peripheral_device,
&heartbeat_device,
#ifndef CONFIG_SH_R7780RP
- &cf_ide_device,
&ax88796_device,
#endif
};
+/*
+ * The CF is connected using a 16-bit bus where 8-bit operations are
+ * unsupported. The linux ata driver is however using 8-bit operations, so
+ * insert a trapped io filter to convert 8-bit operations into 16-bit.
+ */
+static struct trapped_io cf_trapped_io = {
+ .resource = cf_ide_resources,
+ .num_resources = 2,
+ .minimum_bus_width = 16,
+};
+
static int __init r7780rp_devices_setup(void)
{
+#ifndef CONFIG_SH_R7780RP
+ if (register_trapped_io(&cf_trapped_io) = 0)
+ platform_device_register(&cf_ide_device);
+#endif
return platform_add_devices(r7780rp_devices,
ARRAY_SIZE(r7780rp_devices));
}
@@ -226,34 +241,6 @@ static void r7780rp_power_off(void)
ctrl_outw(0x0001, PA_POFF);
}
-static inline unsigned char is_ide_ioaddr(unsigned long addr)
-{
- return ((cf_ide_resources[0].start <= addr &&
- addr <= cf_ide_resources[0].end) ||
- (cf_ide_resources[1].start <= addr &&
- addr <= cf_ide_resources[1].end));
-}
-
-void highlander_writeb(u8 b, void __iomem *addr)
-{
- unsigned long tmp = (unsigned long __force)addr;
-
- if (is_ide_ioaddr(tmp))
- ctrl_outw((u16)b, tmp);
- else
- ctrl_outb(b, tmp);
-}
-
-u8 highlander_readb(void __iomem *addr)
-{
- unsigned long tmp = (unsigned long __force)addr;
-
- if (is_ide_ioaddr(tmp))
- return ctrl_inw(tmp) & 0xff;
- else
- return ctrl_inb(tmp);
-}
-
/*
* Initialize the board
*/
@@ -338,6 +325,4 @@ static struct sh_machine_vector mv_highl
.mv_setup = highlander_setup,
.mv_init_irq = highlander_init_irq,
.mv_irq_demux = highlander_irq_demux,
- .mv_readb = highlander_readb,
- .mv_writeb = highlander_writeb,
};
--- 0001/include/asm-sh/r7780rp.h
+++ work/include/asm-sh/r7780rp.h 2008-02-07 19:18:21.000000000 +0900
@@ -195,7 +195,4 @@ unsigned char *highlander_init_irq_r7780
unsigned char *highlander_init_irq_r7780rp(void);
unsigned char *highlander_init_irq_r7785rp(void);
-#define __IO_PREFIX r7780rp
-#include <asm/io_generic.h>
-
#endif /* __ASM_SH_RENESAS_R7780RP */
prev parent reply other threads:[~2008-02-07 11:23 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-02-06 15:23 [PATCH] sh: trapped io support for highlander Magnus Damm
2008-02-07 11:23 ` Magnus Damm [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080207112353.9748.54200.sendpatchset@clockwork.opensource.se \
--to=magnus.damm@gmail.com \
--cc=linux-sh@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox