From: Magnus Damm <magnus.damm@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: linux-sh@vger.kernel.org, gregkh@suse.de, lethal@linux-sh.org,
i2c@lm-sensors.org, Magnus Damm <magnus.damm@gmail.com>,
akpm@linux-foundation.org
Subject: [PATCH 03/05] resource: add new IORESOURCE_CLK type V2
Date: Fri, 18 Jul 2008 07:40:27 +0000 [thread overview]
Message-ID: <20080718074027.32713.15674.sendpatchset@rx1.opensource.se> (raw)
In-Reply-To: <20080718074002.32713.73442.sendpatchset@rx1.opensource.se>
From: Magnus Damm <damm@igel.co.jp>
So far struct resource has been used with the types IORESOURCE_MEM,
IORESOURCE_IO and IORESOUCE_IRQ to pass I/O and interrupt parameters
to platform drivers. This patch extends this with IORESOURCE_CLK which
should be used to pass a clock string to the platform driver. This
string points out which specific clock that should be used with clk_get()
for a certain driver instance.
Using a hard coded strings in the device driver won't do since we may
have multiple instances of drivers that need to use different clocks.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
---
Changes since V1:
- Use a new bit for IORESOURCE_CLK instead of switching to a counter
include/linux/ioport.h | 17 +++++++++--------
1 file changed, 9 insertions(+), 8 deletions(-)
--- 0003/include/linux/ioport.h
+++ work/include/linux/ioport.h 2008-07-18 14:29:48.000000000 +0900
@@ -34,20 +34,21 @@ struct resource_list {
*/
#define IORESOURCE_BITS 0x000000ff /* Bus-specific bits */
-#define IORESOURCE_TYPE_BITS 0x00000f00 /* Resource type */
+#define IORESOURCE_TYPE_BITS 0x00001f00 /* Resource type */
#define IORESOURCE_IO 0x00000100
#define IORESOURCE_MEM 0x00000200
#define IORESOURCE_IRQ 0x00000400
#define IORESOURCE_DMA 0x00000800
+#define IORESOURCE_CLK 0x00001000
-#define IORESOURCE_PREFETCH 0x00001000 /* No side effects */
-#define IORESOURCE_READONLY 0x00002000
-#define IORESOURCE_CACHEABLE 0x00004000
-#define IORESOURCE_RANGELENGTH 0x00008000
-#define IORESOURCE_SHADOWABLE 0x00010000
+#define IORESOURCE_PREFETCH 0x00002000 /* No side effects */
+#define IORESOURCE_READONLY 0x00004000
+#define IORESOURCE_CACHEABLE 0x00008000
+#define IORESOURCE_RANGELENGTH 0x00010000
+#define IORESOURCE_SHADOWABLE 0x00020000
-#define IORESOURCE_SIZEALIGN 0x00020000 /* size indicates alignment */
-#define IORESOURCE_STARTALIGN 0x00040000 /* start field is alignment */
+#define IORESOURCE_SIZEALIGN 0x00040000 /* size indicates alignment */
+#define IORESOURCE_STARTALIGN 0x00080000 /* start field is alignment */
#define IORESOURCE_DISABLED 0x10000000
#define IORESOURCE_UNSET 0x20000000
next prev parent reply other threads:[~2008-07-18 7:40 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-07-18 7:40 [PATCH 00/05] resource: type, size and IORESOURCE_CLK patches V2 Magnus Damm
2008-07-18 7:40 ` [PATCH 01/05] resource: add resource_size() Magnus Damm
2008-07-18 7:54 ` Ben Dooks
2008-07-18 7:40 ` [PATCH 02/05] resource: add resource_type() and IORESOURCE_TYPE_BITS Magnus Damm
2008-07-18 7:56 ` [PATCH 02/05] resource: add resource_type() and Ben Dooks
2008-07-18 8:24 ` [PATCH 02/05] resource: add resource_type() and IORESOURCE_TYPE_BITS Magnus Damm
2008-07-18 8:33 ` [PATCH 02/05] resource: add resource_type() and Ben Dooks
2008-07-18 9:05 ` [PATCH 02/05] resource: add resource_type() and IORESOURCE_TYPE_BITS Magnus Damm
2008-07-18 7:40 ` Magnus Damm [this message]
2008-07-18 7:53 ` [i2c] [PATCH 03/05] resource: add new IORESOURCE_CLK type V2 Ben Dooks
2008-07-18 8:53 ` Magnus Damm
2008-07-18 7:40 ` [PATCH 04/05] i2c-sh_mobile: IORESOURCE_CLK support Magnus Damm
2008-07-18 8:04 ` Ben Dooks
2008-07-18 9:18 ` Magnus Damm
2008-08-13 5:54 ` [i2c] " Ben Dooks
2008-08-13 7:51 ` Russell King
2008-07-18 7:40 ` [PATCH 05/05] sh: add IORESOURCE_CLK to SuperH Mobile I2C platform data Magnus Damm
2008-07-18 23:36 ` [PATCH 05/05] sh: add IORESOURCE_CLK to SuperH Mobile I2C Andrew Morton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080718074027.32713.15674.sendpatchset@rx1.opensource.se \
--to=magnus.damm@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=gregkh@suse.de \
--cc=i2c@lm-sensors.org \
--cc=lethal@linux-sh.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sh@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox