From: Magnus Damm <magnus.damm@gmail.com>
To: linux-sh@vger.kernel.org
Subject: [PATCH] sh: sh_mobile keysc clock framework support
Date: Fri, 31 Oct 2008 11:21:23 +0000 [thread overview]
Message-ID: <20081031112123.2988.39875.sendpatchset@rx1.opensource.se> (raw)
From: Magnus Damm <damm@igel.co.jp>
Add clock framework support to the sh_mobile keysc driver and
adjust the board specific code accordingly.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
---
arch/sh/boards/mach-migor/setup.c | 2 +-
arch/sh/boards/mach-se/7722/setup.c | 3 +--
drivers/input/keyboard/sh_keysc.c | 28 +++++++++++++++++++++++-----
3 files changed, 25 insertions(+), 8 deletions(-)
--- 0001/arch/sh/boards/mach-migor/setup.c
+++ work/arch/sh/boards/mach-migor/setup.c 2008-10-28 16:49:10.000000000 +0900
@@ -89,6 +89,7 @@ static struct resource sh_keysc_resource
static struct platform_device sh_keysc_device = {
.name = "sh_keysc",
+ .id = 0, /* "keysc0" clock */
.num_resources = ARRAY_SIZE(sh_keysc_resources),
.resource = sh_keysc_resources,
.dev = {
@@ -479,7 +480,6 @@ static int __init migor_devices_setup(vo
ctrl_outl(0x00110080, BSC_CS4WCR);
/* KEYSC */
- clk_always_enable("mstp214"); /* KEYSC */
gpio_request(GPIO_FN_KEYOUT0, NULL);
gpio_request(GPIO_FN_KEYOUT1, NULL);
gpio_request(GPIO_FN_KEYOUT2, NULL);
--- 0001/arch/sh/boards/mach-se/7722/setup.c
+++ work/arch/sh/boards/mach-se/7722/setup.c 2008-10-28 16:49:03.000000000 +0900
@@ -130,6 +130,7 @@ static struct resource sh_keysc_resource
static struct platform_device sh_keysc_device = {
.name = "sh_keysc",
+ .id = 0, /* "keysc0" clock */
.num_resources = ARRAY_SIZE(sh_keysc_resources),
.resource = sh_keysc_resources,
.dev = {
@@ -146,8 +147,6 @@ static struct platform_device *se7722_de
static int __init se7722_devices_setup(void)
{
- clk_always_enable("mstp214"); /* KEYSC */
-
return platform_add_devices(se7722_devices,
ARRAY_SIZE(se7722_devices));
}
--- 0001/drivers/input/keyboard/sh_keysc.c
+++ work/drivers/input/keyboard/sh_keysc.c 2008-10-28 16:46:27.000000000 +0900
@@ -18,6 +18,7 @@
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/input.h>
+#include <linux/clk.h>
#include <linux/io.h>
#include <asm/sh_keysc.h>
@@ -39,6 +40,7 @@ static const struct {
struct sh_keysc_priv {
void __iomem *iomem_base;
+ struct clk *clk;
unsigned long last_keys;
struct input_dev *input;
struct sh_keysc_info pdata;
@@ -125,6 +127,7 @@ static int __devinit sh_keysc_probe(stru
struct sh_keysc_info *pdata;
struct resource *res;
struct input_dev *input;
+ char clk_name[8];
int i, k;
int irq, error;
@@ -165,11 +168,19 @@ static int __devinit sh_keysc_probe(stru
goto err1;
}
+ snprintf(clk_name, sizeof(clk_name), "keysc%d", pdev->id);
+ priv->clk = clk_get(&pdev->dev, clk_name);
+ if (IS_ERR(priv->clk)) {
+ dev_err(&pdev->dev, "cannot get clock \"%s\"\n", clk_name);
+ error = PTR_ERR(priv->clk);
+ goto err2;
+ }
+
priv->input = input_allocate_device();
if (!priv->input) {
dev_err(&pdev->dev, "failed to allocate input device\n");
error = -ENOMEM;
- goto err2;
+ goto err3;
}
input = priv->input;
@@ -187,7 +198,7 @@ static int __devinit sh_keysc_probe(stru
error = request_irq(irq, sh_keysc_isr, 0, pdev->name, pdev);
if (error) {
dev_err(&pdev->dev, "failed to request IRQ\n");
- goto err3;
+ goto err4;
}
for (i = 0; i < SH_KEYSC_MAXKEYS; i++) {
@@ -199,18 +210,22 @@ static int __devinit sh_keysc_probe(stru
error = input_register_device(input);
if (error) {
dev_err(&pdev->dev, "failed to register input device\n");
- goto err4;
+ goto err5;
}
+ clk_enable(priv->clk);
+
iowrite16((sh_keysc_mode[pdata->mode].kymd << 8) |
pdata->scan_timing, priv->iomem_base + KYCR1_OFFS);
iowrite16(0, priv->iomem_base + KYOUTDR_OFFS);
iowrite16(KYCR2_IRQ_LEVEL, priv->iomem_base + KYCR2_OFFS);
return 0;
- err4:
+ err5:
free_irq(irq, pdev);
- err3:
+ err4:
input_free_device(input);
+ err3:
+ clk_put(priv->clk);
err2:
iounmap(priv->iomem_base);
err1:
@@ -230,6 +245,9 @@ static int __devexit sh_keysc_remove(str
free_irq(platform_get_irq(pdev, 0), pdev);
iounmap(priv->iomem_base);
+ clk_disable(priv->clk);
+ clk_put(priv->clk);
+
platform_set_drvdata(pdev, NULL);
kfree(priv);
return 0;
reply other threads:[~2008-10-31 11:21 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20081031112123.2988.39875.sendpatchset@rx1.opensource.se \
--to=magnus.damm@gmail.com \
--cc=linux-sh@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox