public inbox for linux-sh@vger.kernel.org
 help / color / mirror / Atom feed
From: Magnus Damm <magnus.damm@gmail.com>
To: linux-sh@vger.kernel.org
Subject: [PATCH] sh: TMU platform data for sh7722
Date: Fri, 01 May 2009 06:58:52 +0000	[thread overview]
Message-ID: <20090501065852.8861.19090.sendpatchset@rx1.opensource.se> (raw)

From: Magnus Damm <damm@igel.co.jp>

This patch adds TMU platform data for sh7722. Only clockevent
mode is enabled for now, clocksource requires this patch:
"clocksource: setup mult_orig in clocksource_enable()"

Signed-off-by: Magnus Damm <damm@igel.co.jp>
---

 arch/sh/Kconfig                        |    1 
 arch/sh/kernel/cpu/sh4a/setup-sh7722.c |   99 ++++++++++++++++++++++++++++++++
 2 files changed, 100 insertions(+)

--- 0007/arch/sh/Kconfig
+++ work/arch/sh/Kconfig	2009-05-01 13:22:50.000000000 +0900
@@ -423,6 +423,7 @@ config CPU_SUBTYPE_SH7722
 	select ARCH_SPARSEMEM_ENABLE
 	select SYS_SUPPORTS_NUMA
 	select SYS_SUPPORTS_CMT
+	select SYS_SUPPORTS_TMU
 
 config CPU_SUBTYPE_SH7366
 	bool "Support SH7366 processor"
--- 0001/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
+++ work/arch/sh/kernel/cpu/sh4a/setup-sh7722.c	2009-05-01 13:32:49.000000000 +0900
@@ -14,6 +14,7 @@
 #include <linux/mm.h>
 #include <linux/uio_driver.h>
 #include <linux/sh_cmt.h>
+#include <linux/sh_tmu.h>
 #include <asm/clock.h>
 #include <asm/mmzone.h>
 
@@ -209,6 +210,98 @@ static struct platform_device cmt_device
 	.num_resources	= ARRAY_SIZE(cmt_resources),
 };
 
+static struct sh_tmu_config tmu0_platform_data = {
+	.name = "TMU0",
+	.channel_offset = 0x04,
+	.timer_bit = 0,
+	.clk = "tmu0",
+	.clockevent_rating = 200,
+};
+
+static struct resource tmu0_resources[] = {
+	[0] = {
+		.name	= "TMU0",
+		.start	= 0xffd80008,
+		.end	= 0xffd80013,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 16,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu0_device = {
+	.name		= "sh_tmu",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &tmu0_platform_data,
+	},
+	.resource	= tmu0_resources,
+	.num_resources	= ARRAY_SIZE(tmu0_resources),
+};
+
+static struct sh_tmu_config tmu1_platform_data = {
+	.name = "TMU1",
+	.channel_offset = 0x10,
+	.timer_bit = 1,
+	.clk = "tmu0",
+	.clocksource_rating = 0, /* disabled for now */
+};
+
+static struct resource tmu1_resources[] = {
+	[0] = {
+		.name	= "TMU1",
+		.start	= 0xffd80014,
+		.end	= 0xffd8001f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 17,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu1_device = {
+	.name		= "sh_tmu",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &tmu1_platform_data,
+	},
+	.resource	= tmu1_resources,
+	.num_resources	= ARRAY_SIZE(tmu1_resources),
+};
+
+static struct sh_tmu_config tmu2_platform_data = {
+	.name = "TMU2",
+	.channel_offset = 0x1c,
+	.timer_bit = 2,
+	.clk = "tmu0",
+};
+
+static struct resource tmu2_resources[] = {
+	[0] = {
+		.name	= "TMU2",
+		.start	= 0xffd80020,
+		.end	= 0xffd8002b,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 18,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu2_device = {
+	.name		= "sh_tmu",
+	.id		= 2,
+	.dev = {
+		.platform_data	= &tmu2_platform_data,
+	},
+	.resource	= tmu2_resources,
+	.num_resources	= ARRAY_SIZE(tmu2_resources),
+};
+
 static struct plat_sci_port sci_platform_data[] = {
 	{
 		.mapbase	= 0xffe00000,
@@ -243,6 +336,9 @@ static struct platform_device sci_device
 
 static struct platform_device *sh7722_devices[] __initdata = {
 	&cmt_device,
+	&tmu0_device,
+	&tmu1_device,
+	&tmu2_device,
 	&rtc_device,
 	&usbf_device,
 	&iic_device,
@@ -271,6 +367,9 @@ __initcall(sh7722_devices_setup);
 
 static struct platform_device *sh7722_early_devices[] __initdata = {
 	&cmt_device,
+	&tmu0_device,
+	&tmu1_device,
+	&tmu2_device,
 };
 
 void __init plat_early_device_setup(void)

                 reply	other threads:[~2009-05-01  6:58 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20090501065852.8861.19090.sendpatchset@rx1.opensource.se \
    --to=magnus.damm@gmail.com \
    --cc=linux-sh@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox