From: Magnus Damm <magnus.damm@gmail.com>
To: linux-sh@vger.kernel.org
Subject: [PATCH] sh: TMU platform data for sh7760
Date: Mon, 11 May 2009 09:06:24 +0000 [thread overview]
Message-ID: <20090511090624.508.11282.sendpatchset@rx1.opensource.se> (raw)
From: Magnus Damm <damm@igel.co.jp>
This patch adds TMU platform data for sh7760. Both clockevent
and clocksource support is enabled.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
---
Compiles fine , but not run time tested due to lack of hardware.
arch/sh/kernel/cpu/sh4/setup-sh7760.c | 109 +++++++++++++++++++++++++++++++++
1 file changed, 109 insertions(+)
--- 0005/arch/sh/kernel/cpu/sh4/setup-sh7760.c
+++ work/arch/sh/kernel/cpu/sh4/setup-sh7760.c 2009-05-11 17:30:11.000000000 +0900
@@ -10,6 +10,7 @@
#include <linux/platform_device.h>
#include <linux/init.h>
#include <linux/serial.h>
+#include <linux/sh_timer.h>
#include <linux/serial_sci.h>
#include <linux/io.h>
@@ -159,8 +160,104 @@ static struct platform_device sci_device
},
};
+static struct sh_timer_config tmu0_platform_data = {
+ .name = "TMU0",
+ .channel_offset = 0x04,
+ .timer_bit = 0,
+ .clk = "module_clk",
+ .clockevent_rating = 200,
+};
+
+static struct resource tmu0_resources[] = {
+ [0] = {
+ .name = "TMU0",
+ .start = 0xffd80008,
+ .end = 0xffd80013,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 16,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu0_device = {
+ .name = "sh_tmu",
+ .id = 0,
+ .dev = {
+ .platform_data = &tmu0_platform_data,
+ },
+ .resource = tmu0_resources,
+ .num_resources = ARRAY_SIZE(tmu0_resources),
+};
+
+static struct sh_timer_config tmu1_platform_data = {
+ .name = "TMU1",
+ .channel_offset = 0x10,
+ .timer_bit = 1,
+ .clk = "module_clk",
+ .clocksource_rating = 200,
+};
+
+static struct resource tmu1_resources[] = {
+ [0] = {
+ .name = "TMU1",
+ .start = 0xffd80014,
+ .end = 0xffd8001f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 17,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu1_device = {
+ .name = "sh_tmu",
+ .id = 1,
+ .dev = {
+ .platform_data = &tmu1_platform_data,
+ },
+ .resource = tmu1_resources,
+ .num_resources = ARRAY_SIZE(tmu1_resources),
+};
+
+static struct sh_timer_config tmu2_platform_data = {
+ .name = "TMU2",
+ .channel_offset = 0x1c,
+ .timer_bit = 2,
+ .clk = "module_clk",
+};
+
+static struct resource tmu2_resources[] = {
+ [0] = {
+ .name = "TMU2",
+ .start = 0xffd80020,
+ .end = 0xffd8002f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 18,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device tmu2_device = {
+ .name = "sh_tmu",
+ .id = 2,
+ .dev = {
+ .platform_data = &tmu2_platform_data,
+ },
+ .resource = tmu2_resources,
+ .num_resources = ARRAY_SIZE(tmu2_resources),
+};
+
+
static struct platform_device *sh7760_devices[] __initdata = {
&sci_device,
+ &tmu0_device,
+ &tmu1_device,
+ &tmu2_device,
};
static int __init sh7760_devices_setup(void)
@@ -170,6 +267,18 @@ static int __init sh7760_devices_setup(v
}
__initcall(sh7760_devices_setup);
+static struct platform_device *sh7760_early_devices[] __initdata = {
+ &tmu0_device,
+ &tmu1_device,
+ &tmu2_device,
+};
+
+void __init plat_early_device_setup(void)
+{
+ early_platform_add_devices(sh7760_early_devices,
+ ARRAY_SIZE(sh7760_early_devices));
+}
+
#define INTC_ICR 0xffd00000UL
#define INTC_ICR_IRLM (1 << 7)
reply other threads:[~2009-05-11 9:06 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090511090624.508.11282.sendpatchset@rx1.opensource.se \
--to=magnus.damm@gmail.com \
--cc=linux-sh@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox