From: Magnus Damm <magnus.damm@gmail.com>
To: linux-sh@vger.kernel.org
Subject: [PATCH] sh: CMT platform data for sh7720/sh7721
Date: Tue, 12 May 2009 10:21:11 +0000 [thread overview]
Message-ID: <20090512102111.25772.7187.sendpatchset@rx1.opensource.se> (raw)
From: Magnus Damm <damm@igel.co.jp>
This patch adds CMT platform data for sh7720 and sh7721.
All 5 32-bit CMT channels unfortunately share a single IRQ.
Both clockevent and clocksource support is enabled.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
---
arch/sh/Kconfig | 2
arch/sh/kernel/cpu/sh3/setup-sh7720.c | 161 +++++++++++++++++++++++++++++++++
2 files changed, 163 insertions(+)
--- 0001/arch/sh/Kconfig
+++ work/arch/sh/Kconfig 2009-05-12 16:47:18.000000000 +0900
@@ -302,6 +302,7 @@ config CPU_SUBTYPE_SH7720
bool "Support SH7720 processor"
select CPU_SH3
select CPU_HAS_DSP
+ select SYS_SUPPORTS_CMT
help
Select SH7720 if you have a SH3-DSP SH7720 CPU.
@@ -309,6 +310,7 @@ config CPU_SUBTYPE_SH7721
bool "Support SH7721 processor"
select CPU_SH3
select CPU_HAS_DSP
+ select SYS_SUPPORTS_CMT
help
Select SH7721 if you have a SH3-DSP SH7721 CPU.
--- 0014/arch/sh/kernel/cpu/sh3/setup-sh7720.c
+++ work/arch/sh/kernel/cpu/sh3/setup-sh7720.c 2009-05-12 16:45:22.000000000 +0900
@@ -124,6 +124,157 @@ static struct platform_device usbf_devic
.resource = usbf_resources,
};
+static struct sh_timer_config cmt0_platform_data = {
+ .name = "CMT0",
+ .channel_offset = 0x10,
+ .timer_bit = 0,
+ .clk = "module_clk",
+ .clockevent_rating = 125,
+ .clocksource_rating = 125,
+};
+
+static struct resource cmt0_resources[] = {
+ [0] = {
+ .name = "CMT0",
+ .start = 0x044a0010,
+ .end = 0x044a001b,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 104,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device cmt0_device = {
+ .name = "sh_cmt",
+ .id = 0,
+ .dev = {
+ .platform_data = &cmt0_platform_data,
+ },
+ .resource = cmt0_resources,
+ .num_resources = ARRAY_SIZE(cmt0_resources),
+};
+
+static struct sh_timer_config cmt1_platform_data = {
+ .name = "CMT1",
+ .channel_offset = 0x20,
+ .timer_bit = 1,
+ .clk = "module_clk",
+};
+
+static struct resource cmt1_resources[] = {
+ [0] = {
+ .name = "CMT1",
+ .start = 0x044a0020,
+ .end = 0x044a002b,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 104,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device cmt1_device = {
+ .name = "sh_cmt",
+ .id = 1,
+ .dev = {
+ .platform_data = &cmt1_platform_data,
+ },
+ .resource = cmt1_resources,
+ .num_resources = ARRAY_SIZE(cmt1_resources),
+};
+
+static struct sh_timer_config cmt2_platform_data = {
+ .name = "CMT2",
+ .channel_offset = 0x30,
+ .timer_bit = 2,
+ .clk = "module_clk",
+};
+
+static struct resource cmt2_resources[] = {
+ [0] = {
+ .name = "CMT2",
+ .start = 0x044a0030,
+ .end = 0x044a003b,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 104,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device cmt2_device = {
+ .name = "sh_cmt",
+ .id = 2,
+ .dev = {
+ .platform_data = &cmt2_platform_data,
+ },
+ .resource = cmt2_resources,
+ .num_resources = ARRAY_SIZE(cmt2_resources),
+};
+
+static struct sh_timer_config cmt3_platform_data = {
+ .name = "CMT3",
+ .channel_offset = 0x40,
+ .timer_bit = 3,
+ .clk = "module_clk",
+};
+
+static struct resource cmt3_resources[] = {
+ [0] = {
+ .name = "CMT3",
+ .start = 0x044a0040,
+ .end = 0x044a004b,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 104,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device cmt3_device = {
+ .name = "sh_cmt",
+ .id = 3,
+ .dev = {
+ .platform_data = &cmt3_platform_data,
+ },
+ .resource = cmt3_resources,
+ .num_resources = ARRAY_SIZE(cmt3_resources),
+};
+
+static struct sh_timer_config cmt4_platform_data = {
+ .name = "CMT4",
+ .channel_offset = 0x50,
+ .timer_bit = 4,
+ .clk = "module_clk",
+};
+
+static struct resource cmt4_resources[] = {
+ [0] = {
+ .name = "CMT4",
+ .start = 0x044a0050,
+ .end = 0x044a005b,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 104,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device cmt4_device = {
+ .name = "sh_cmt",
+ .id = 4,
+ .dev = {
+ .platform_data = &cmt4_platform_data,
+ },
+ .resource = cmt4_resources,
+ .num_resources = ARRAY_SIZE(cmt4_resources),
+};
static struct sh_timer_config tmu0_platform_data = {
.name = "TMU0",
@@ -218,6 +369,11 @@ static struct platform_device tmu2_devic
};
static struct platform_device *sh7720_devices[] __initdata = {
+ &cmt0_device,
+ &cmt1_device,
+ &cmt2_device,
+ &cmt3_device,
+ &cmt4_device,
&tmu0_device,
&tmu1_device,
&tmu2_device,
@@ -235,6 +391,11 @@ static int __init sh7720_devices_setup(v
__initcall(sh7720_devices_setup);
static struct platform_device *sh7720_early_devices[] __initdata = {
+ &cmt0_device,
+ &cmt1_device,
+ &cmt2_device,
+ &cmt3_device,
+ &cmt4_device,
&tmu0_device,
&tmu1_device,
&tmu2_device,
reply other threads:[~2009-05-12 10:21 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090512102111.25772.7187.sendpatchset@rx1.opensource.se \
--to=magnus.damm@gmail.com \
--cc=linux-sh@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox