From: Magnus Damm <magnus.damm@gmail.com>
To: linux-sh@vger.kernel.org
Subject: [PATCH 04/04] sh: sh7724 ddr self-refresh changes
Date: Sat, 15 Aug 2009 02:53:42 +0000 [thread overview]
Message-ID: <20090815025342.8125.7783.sendpatchset@rx1.opensource.se> (raw)
From: Magnus Damm <damm@igel.co.jp>
This patch updates the SuperH Mobile sleep assembly code with
support for DBSC memory controller found in the sh7724 processor.
Without this fix the memory hooked up to the sh7724 processor
will never enter self-refresh mode before suspending to ram. The
effect of this is that the memory contents most likeley will be
lost upon resume which may or may not be what you want.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
---
arch/sh/kernel/cpu/shmobile/sleep.S | 70 ++++++++++++++++++++++++++++++++++-
1 file changed, 68 insertions(+), 2 deletions(-)
--- 0001/arch/sh/kernel/cpu/shmobile/sleep.S
+++ work/arch/sh/kernel/cpu/shmobile/sleep.S 2009-08-14 12:36:40.000000000 +0900
@@ -26,8 +26,30 @@ ENTRY(sh_mobile_standby)
tst #SUSP_SH_SF, r0
bt skip_set_sf
+#ifdef CONFIG_CPU_SUBTYPE_SH7724
+ /* DBSC: put memory in self-refresh mode */
- /* SDRAM: disable power down and put in self-refresh mode */
+ mov.l dben_reg, r4
+ mov.l dben_data0, r1
+ mov.l r1, @r4
+
+ mov.l dbrfpdn0_reg, r4
+ mov.l dbrfpdn0_data0, r1
+ mov.l r1, @r4
+
+ mov.l dbcmdcnt_reg, r4
+ mov.l dbcmdcnt_data0, r1
+ mov.l r1, @r4
+
+ mov.l dbcmdcnt_reg, r4
+ mov.l dbcmdcnt_data1, r1
+ mov.l r1, @r4
+
+ mov.l dbrfpdn0_reg, r4
+ mov.l dbrfpdn0_data1, r1
+ mov.l r1, @r4
+#else
+ /* SBSC: disable power down and put in self-refresh mode */
mov.l 1f, r4
mov.l 2f, r1
mov.l @r4, r2
@@ -35,6 +57,7 @@ ENTRY(sh_mobile_standby)
mov.l 3f, r3
and r3, r2
mov.l r2, @r4
+#endif
skip_set_sf:
tst #SUSP_SH_SLEEP, r0
@@ -84,7 +107,36 @@ done_sleep:
tst #SUSP_SH_SF, r0
bt skip_restore_sf
- /* SDRAM: set auto-refresh mode */
+#ifdef CONFIG_CPU_SUBTYPE_SH7724
+ /* DBSC: put memory in auto-refresh mode */
+
+ mov.l dbrfpdn0_reg, r4
+ mov.l dbrfpdn0_data0, r1
+ mov.l r1, @r4
+
+ /* sleep 140 ns */
+ nop
+ nop
+ nop
+ nop
+
+ mov.l dbcmdcnt_reg, r4
+ mov.l dbcmdcnt_data0, r1
+ mov.l r1, @r4
+
+ mov.l dbcmdcnt_reg, r4
+ mov.l dbcmdcnt_data1, r1
+ mov.l r1, @r4
+
+ mov.l dben_reg, r4
+ mov.l dben_data1, r1
+ mov.l r1, @r4
+
+ mov.l dbrfpdn0_reg, r4
+ mov.l dbrfpdn0_data2, r1
+ mov.l r1, @r4
+#else
+ /* SBSC: set auto-refresh mode */
mov.l 1f, r4
mov.l @r4, r2
mov.l 4f, r3
@@ -98,15 +150,29 @@ done_sleep:
add r4, r3
or r2, r3
mov.l r3, @r1
+#endif
skip_restore_sf:
rts
nop
.balign 4
+#ifdef CONFIG_CPU_SUBTYPE_SH7724
+dben_reg: .long 0xfd000010 /* DBEN */
+dben_data0: .long 0
+dben_data1: .long 1
+dbrfpdn0_reg: .long 0xfd000040 /* DBRFPDN0 */
+dbrfpdn0_data0: .long 0
+dbrfpdn0_data1: .long 1
+dbrfpdn0_data2: .long 0x00010000
+dbcmdcnt_reg: .long 0xfd000014 /* DBCMDCNT */
+dbcmdcnt_data0: .long 2
+dbcmdcnt_data1: .long 4
+#else
1: .long 0xfe400008 /* SDCR0 */
2: .long 0x00000400
3: .long 0xffff7fff
4: .long 0xfffffbff
+#endif
5: .long 0xa4150020 /* STBCR */
6: .long 0xfe40001c /* RTCOR */
7: .long 0xfe400018 /* RTCNT */
reply other threads:[~2009-08-15 2:53 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090815025342.8125.7783.sendpatchset@rx1.opensource.se \
--to=magnus.damm@gmail.com \
--cc=linux-sh@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox