* [PATCH] tmio_mmc: use 100ms mmc_detect_change() delay
@ 2010-02-15 12:12 Magnus Damm
0 siblings, 0 replies; only message in thread
From: Magnus Damm @ 2010-02-15 12:12 UTC (permalink / raw)
To: linux-mmc; +Cc: Magnus Damm, akpm, linux-sh
From: Magnus Damm <damm@opensource.se>
This patch changes the tmio_mmc driver to wait 100ms
before checking the card detect status. This type of
delay is quite common among mmc drivers, it seems that
most hardware platforms need to give the hardware some
time to settle before checking card availabilty.
Hotplug is half-broken without this patch on the sh7724
Ecovec board. Hot plugging seems ok but eject is never
detected without this patch.
Signed-off-by: Magnus Damm <damm@opensource.se>
---
drivers/mmc/host/tmio_mmc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- 0001/drivers/mmc/host/tmio_mmc.c
+++ work/drivers/mmc/host/tmio_mmc.c 2010-02-15 20:28:15.000000000 +0900
@@ -323,7 +323,7 @@ static irqreturn_t tmio_mmc_irq(int irq,
if (ireg & (TMIO_STAT_CARD_INSERT | TMIO_STAT_CARD_REMOVE)) {
ack_mmc_irqs(host, TMIO_STAT_CARD_INSERT |
TMIO_STAT_CARD_REMOVE);
- mmc_detect_change(host->mmc, 0);
+ mmc_detect_change(host->mmc, msecs_to_jiffies(100));
}
/* CRC and other errors */
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2010-02-15 12:12 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-02-15 12:12 [PATCH] tmio_mmc: use 100ms mmc_detect_change() delay Magnus Damm
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).