From mboxrd@z Thu Jan 1 00:00:00 1970 From: Paul Mundt Date: Wed, 24 Feb 2010 01:03:09 +0000 Subject: Re: Problem when testing current git on sh3 + hp6xx Message-Id: <20100224010309.GB17581@linux-sh.org> List-Id: References: <20100223025042.GA28763@rafazurita.homelinux.net> In-Reply-To: <20100223025042.GA28763@rafazurita.homelinux.net> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-sh@vger.kernel.org On Tue, Feb 23, 2010 at 07:38:03PM -0300, Rafael Ignacio Zurita wrote: > On Tue, Feb 23, 2010 at 12:51:09PM +0900, Paul Mundt wrote: > > Based on this it would seem that you are entering the kernel with pending > > timer IRQs and are racing against the clockevent setup, as no one has set > > up the event handler yet. Try this: > > After to apply your patch it looks a lot better. The log : > > Calibrating delay loop (skipped)... 22.11 BogoMIPS PRESET (lpjD220) It would seem that the clock framework still needs a bit of work for this CPU.. > HD64461 configured at 0xb0000000 on irq 36(mapped into 64 to 79) > HD64461: enabling PCMCIA devices [snip] > scsi0 : pata_platform > ata1: PATA max PIO0 mmio cmd 0x150001f0 ctl 0x150001fe irq 77 Good to see that sparseirq works as advertized here too. > If your patch is applied then I need to check why X does not run, > but that is another story. > If your patch is not going to mainline, then please, let me know > what should be done to continue fixing the original issue. > I'll push them out today and add your Tested-by. Thanks for testing!